 This chapter provides examples on how to use Netconf to manage FDB configurations on AsterNOS devices.  Dynamic learned FDB entries cannot be retrieved via get-config .

 This chapter provides examples on how to use Netconf to manage hash configurations on AsterNOS devices.  Request example to get hash capabilities via get .

Hash

 This chapter provides examples on how to use Netconf to manage Isolation Group configurations on AsterNOS devices.  Request example to create isolation group via edit-config .

Isolation‑Group

 This chapter provides examples on how to use Netconf to manage Layer 2 Protocol Tunnel (L2PT) configurations on AsterNOS devices.  Request example to create L2PT entry for interface via edit-config .

L2PT

 This chapter provides examples on how to use Netconf to manage LLDP configurations on AsterNOS devices.  Request example to enable LLDP feature via edit-config .

LLDP

 This chapter provides examples on how to use Netconf to manage Loopback Detect configurations on AsterNOS devices.  log-interval is 0 seconds by default which means no log will be generated when loopback is detected.

Loopback‑Detect

 This chapter provides examples on how to use Netconf to manage Mirror configurations on AsterNOS devices.  Request example to create mirror session via edit-config .

Mirror

 Monitor Link Module provides a capability to monitor the status of uplink and downlink interfaces on a network device.  User can add a couple of members into a monitor link group with different mode, if uplink member is down, the downlink member will be shutdown automatically.

MonitorLink

 This chapter provides examples on how to use Netconf to manage Storm Suppress configurations on AsterNOS devices.  Request example to create storm suppress via edit-config .

Storm‑Suppress

 This chapter provides examples on how to use Netconf to manage stp configurations on AsterNOS devices.  Request example to create stp instance 3 via edit-config Response example Request example to get all stp configurations via get-config Response example Request example to replace stp mode to stp via edit-config Response example Request example to disable stp via edit-config Response example Request example to create stp instances via edit-config Response example Request example to get all stp instances via get-config Response example Request example to delete specified stp instances 1 via edit-config Response example Request example to modify specified stp port priority via edit-config Response example Request example to set specified stp interface bpdu via edit-config Response example Request example to show status of all stp instance via rpc show-stp .

 For VLANIF(SVI) related example, please refer to Module AsterNOS-Interface.  Request example to create vlan via edit-config .

VLAN

 This chapter provides examples of how to configure and manage VLAN Translation on AsterNOS devices using NETCONF.

VLAN Translation

Transceiver

Layer2

delete-span-style

Enterprise & Campus Network

About This Manual

Overview of NETCONF

Applicable Switch Models

AsterNOS Datastores

Subtree Filtering

NETCONF Operations

Capabilities

 User Manual Overview

copp

datastores

dhcp-relay

dhcp-server

dhcp-snooping

disagnosis

festure-control

hash

igmp-mld-snooping

interfaces

ipsg

isolation-group

kdump

l2pt

lldp

local-user

loopback-detect

mac-security

mgmt-interface

mirror

monitor-link

nd-snooping

nexthop

portchannels

ports

radius

radv

raguard

savi

sflow

snmp

static-route

storm-suppress

syncE

syslog

system-config

system-information

system

tacacs

time-range

traffic-behavior

user-bind

vlan-translation

vlan

ietf-netconf-monitoring

YANG API Reference

COPP

Interface

Layer3

User Access & Authentication

Monitoring

Multicast

System

Mac‑Security

SyncE

NETCONF Examples

NETCONF Configuration Guide

Preface

Applicable Hardware Models

Basic Configuration

Ethernet Interface Configuration

VLAN Configuration

MAC Address Table Configuration

QinQ Configuration

MSTP Configuration

Ethernet Link Aggregation Configuration

L2PT Configuration

Ethernet Switching Configuration

DHCP Server Configuration

DHCP  Relay Configuration

DHCP Snooping Configuration

ND Snooping Configuration

IP Service Configuration

Policy Route Configuration

IGMP Snooping Configuration

MLD Snooping Configuration

Multicast VLAN Configuration

IGMPv3 Configuration

Querier Configuration

IP Multicast Configuration

ACL Configuration

ARP Attack Detection Configuration

IPSG Configuration

SAVI Configuration

RA Guard Configuration

Security Configuration

QoS Configuration

Traffic Mirroring Configuration

SNMP Configuration

Network Management and Monitoring Configuration

AAA Configuration

Configuration Guide

Device Management

Interface Management

MAC Configuration

Interface Isolation Group Configuration

LLDP Configuration

Link Aggregation Configuration

STP Configuration

Loopback Detection Configuration

Ethernet Switching

IPv4 Configuration

ARP Configuration

DHCP Relay Configuration

IPv6 Configuration

IP Service

IP Multicast

Reliability Configuration

ARP Detection Configuration

IPv6 RA Guard Configuration

User Binding Rule Configuration

Traffic Suppression And Storm Control Configuration

Copp Speed limit

Port Security

Syslog Configuration

SFLOW Configuration

Mirror Configuration

Network Management And Monitoring

Command Line Reference