User Access And Authentication

Preface

Applicable Hardware Models

Basic Configuration

Device Management

Interface Management

Ethernet Switching

IP Service

IP Route

IP Multicast

QoS Configuration

Reliability Configuration

Security Configuration

Network Management And Monitoring

 \[Command] show macsec profile \[Purpose] Display MACsec tunnel policy information for the current configuration.  \[View] System view \[Use Cases] \[Command] show macsec interface \[Purpose] Display the binding relationship between MACsec policies and physical interfaces.

MACsec Configuration

 \[Command] show segment-routing srv6 locator \[Purpose] Display the SRv6 locator configuration for the current configuration \[View] System View \[Use Cases] \[Command] show segment-routing srv6 local sid \[Purpose] Display the currently active SID table entries for the device \[View] System View \[Use Cases] \[Command] show segment-routing srv6 manager \[Purpose] Display the source IP address for the currently configured SRV6 encapsulation \[View] System View \[Use Cases] \[Command] show bgp segment-routing srv6 \[Purpose] Display BGP and SRV6 binding information \[View] System View \[Use Cases] \[Command] locator locator name no locator locator name \[Purpose] Bind the SRv6 locator in the corresponding view \[Parameter] \[View] ISIS/BGP SRv6 Configuration Overview \[Use Cases] \[Command] source-address X\ X X\ X no source-address \[Purpose] Configure the source IP in the SRV6 tunnel header to a specified IPv6 address \[View] Encapsulation Configuration View \[Use Cases] \[Command] prefix X\ X X\ X/M no prefix \[Purpose] Specify the address prefix used by the SRV6 locator \[View] Locator Configuration View \[Notes] Only one instance of this prefix can be configured within a single locator.  \[Use Cases] \[Command] sid vpn per-vrf export {auto| value } no sid vpn per-vrf export \[Purpose] Configure SID entries \[Parameter] \[View] BGP Configuration Views \[Use Cases] \[Command] sid vpn export {auto| value } no sid vpn export \[Purpose] Configure SID entries \[Parameter] \[View] BGP Address Family Configuration Views \[Use Cases] \[Command] sid vpn export {auto| value } no sid vpn export \[Purpose] Configure SID entries \[Parameter] \[View] BGP Address Family Configuration Views \[Use Cases] \[Command] ipv6 route X\ X X\ X/M XX XX segments sid number / sid number no ipv6 route X\ X X\ X/M XX XX \[Purpose] Configure static SRV6 routing and specify the SRv6 forwarding path \[Parameter] \[View] VRF Configuration View \[Notes] The final node in the SRv6 forwarding path must use the addresses SID END.

SRv6 Tunnel Configuration

AAA Configuration

Command Line Reference

delete-span-style

RADIUS Configuration

Enterprise & Campus Network

About This Manual

Overview of NETCONF

Applicable Switch Models

AsterNOS Datastores

Subtree Filtering

NETCONF Operations

Capabilities

 User Manual Overview

copp

datastores

dhcp-relay

dhcp-server

dhcp-snooping

disagnosis

festure-control

hash

igmp-mld-snooping

interfaces

ipsg

isolation-group

kdump

l2pt

lldp

local-user

loopback-detect

mac-security

mgmt-interface

mirror

monitor-link

nd-snooping

nexthop

portchannels

ports

radius

radv

raguard

savi

sflow

snmp

static-route

storm-suppress

syncE

syslog

system-config

system-information

system

tacacs

time-range

traffic-behavior

user-bind

vlan-translation

vlan

ietf-netconf-monitoring

YANG API Reference

COPP

Interface

Layer2

Layer3

User Access & Authentication

Monitoring

Multicast

System

Mac‑Security

SyncE

NETCONF Examples

NETCONF Configuration Guide

Ethernet Interface Configuration

VLAN Configuration

MAC Address Table Configuration

QinQ Configuration

MSTP Configuration

Ethernet Link Aggregation Configuration

L2PT Configuration

Ethernet Switching Configuration

DHCP Server Configuration

DHCP  Relay Configuration

DHCP Snooping Configuration

ND Snooping Configuration

IP Service Configuration

Policy Route Configuration

IGMP Snooping Configuration

MLD Snooping Configuration

Multicast VLAN Configuration

IGMPv3 Configuration

Querier Configuration

IP Multicast Configuration

ACL Configuration

ARP Attack Detection Configuration

IPSG Configuration

SAVI Configuration

RA Guard Configuration

Traffic Mirroring Configuration

SNMP Configuration

Network Management and Monitoring Configuration

Configuration Guide

Local User Configuration

TACACS Configuration

MAC Configuration

Interface Isolation Group Configuration

LLDP Configuration

Link Aggregation Configuration

MC-LAG Configuration

STP Configuration

URPF Configuration

Loopback Detection Configuration

IPv4 Configuration

ARP Configuration

DHCP Relay Configuration

IPv6 Configuration

ISIS Configuration

OSPFv2 Configuration

OSPFv3 Configuration

BGP Configuration

MAC Detection Configuration

ARP Detection Configuration

IPv6 RA Guard Configuration

User Binding Rule Configuration

Traffic Suppression And Storm Control Configuration

Copp Speed limit

Port Security

Syslog Configuration

SFLOW Configuration

Mirror Configuration

PTP Configuration

SyncE Configuration