 This manual is mainly applicable to the following engineers • Network planners • On-site technical support and maintenance staff • Network administrator responsible for network configuration and maintenance For more YANG API reference, please check AsterNOS Campus NETCONF YANG API Reference.  For more examples of using NETCONF to configure and manage AsterNOS devices, please refer to document NETCONF Examples.

About This Manual

 Network Configuration Protocol (NETCONF) is a communication mechanism used between a network management system (NMS) and managed devices.  A network administrator can use NETCONF to add, modify, and delete configurations of network devices, and obtain the configurations and status of network devices.

Overview of NETCONF

 Applicable to the following switch models 

Applicable Switch Models

 AsterNOS support running datastore, which stores the effective running configurations delivered through NETCONF.  The data in this database can be modified, and the modifications take effect immediately.

AsterNOS Datastores

 XML subtree filtering is a mechanism that allows an application to select particular XML subtrees to include in the \<rpc-reply> for a \<get> or \<get-config> operation. A small set of filters for inclusion, simple content exact-match, and selection is provided, which allows some useful, but also very limited, selection mechanisms.

Subtree Filtering

 NETCONF protocol defines a set of operations to modify or obtain information in datastores.  For AsterNOS, operations supported situation are as following AsterNOS support to retrieve all or part of a specified configuration datastore via \<get-config>.

NETCONF Operations

 This section defines a set of capabilities that AsterNOS has implemented.  AsterNOS NETCONF capability is identified with a URI.

Capabilities

 User Manual Overview

delete-span-style

AsterNOS Campus NETCONF User Manual

Enterprise & Campus Network

copp

datastores

dhcp-relay

dhcp-server

dhcp-snooping

disagnosis

festure-control

hash

igmp-mld-snooping

interfaces

ipsg

isolation-group

kdump

l2pt

lldp

local-user

loopback-detect

mac-security

mgmt-interface

mirror

monitor-link

nd-snooping

nexthop

portchannels

ports

radius

radv

raguard

savi

sflow

snmp

static-route

storm-suppress

syncE

syslog

system-config

system-information

system

tacacs

time-range

traffic-behavior

user-bind

vlan-translation

vlan

ietf-netconf-monitoring

YANG API Reference

COPP

Interface

Layer2

Layer3

User Access & Authentication

Monitoring

Multicast

System

Mac‑Security

SyncE

NETCONF Examples

NETCONF Configuration Guide

Preface

Applicable Hardware Models

Basic Configuration

Ethernet Interface Configuration

VLAN Configuration

MAC Address Table Configuration

QinQ Configuration

MSTP Configuration

Ethernet Link Aggregation Configuration

L2PT Configuration

Ethernet Switching Configuration

DHCP Server Configuration

DHCP  Relay Configuration

DHCP Snooping Configuration

ND Snooping Configuration

IP Service Configuration

Policy Route Configuration

IGMP Snooping Configuration

MLD Snooping Configuration

Multicast VLAN Configuration

IGMPv3 Configuration

Querier Configuration

IP Multicast Configuration

ACL Configuration

ARP Attack Detection Configuration

IPSG Configuration

SAVI Configuration

RA Guard Configuration

Security Configuration

QoS Configuration

Traffic Mirroring Configuration

SNMP Configuration

Network Management and Monitoring Configuration

AAA Configuration

Configuration Guide

Device Management

Interface Management

MAC Configuration

Interface Isolation Group Configuration

LLDP Configuration

Link Aggregation Configuration

STP Configuration

Loopback Detection Configuration

Ethernet Switching

IPv4 Configuration

ARP Configuration

DHCP Relay Configuration

IPv6 Configuration

IP Service

IP Multicast

Reliability Configuration

ARP Detection Configuration

IPv6 RA Guard Configuration

User Binding Rule Configuration

Traffic Suppression And Storm Control Configuration

Copp Speed limit

Port Security

Syslog Configuration

SFLOW Configuration

Mirror Configuration

Network Management And Monitoring

Command Line Reference