 \[Command] show radius global \[Purpose] Display terminal RADIUS configuration information.  \[View] System view \[Use Cases] \[Command] show radius server {all | ip-address } \[Purpose] Display radius server configuration \[View] System view \[Use Cases] \[Command] radius global \[auth-type {pap|chap|mschapv2}] \[passkey passkey ] \[src-ip src-ip ] \[nas-ip nas-ip ] \[timeout timeout ] \[retransmit retransmit ] \[Purpose] Configure authentication parameters for the RADIUS server.

RADIUS Configuration

 \[Command] show local-user brief \[Purpose] Display local user information \[View] System view \[Use Cases] show local-user brief show local-user brief This command display description table This command display description table \[Command] show local-user block-conf \[Purpose] Displays the device's configured method for processing successive incorrect password entries by the user \[View] System view \[Use Cases] \[Command] show local-user blocked \[Purpose] Show locked users \[View] System view \[Use Cases] \[Command] show local-user password-control \[Purpose] Show user password complexity configuration \[View] System view \[Use Cases] \[Command] local-user name name passwd password no local-user \[Purpose] Create local user \[Parameter] \[View] System configuration view \[Use Cases] \[Command] local-user block-time time \[Purpose] Configure local users to continuously enter incorrect password account lockout time \[Parameter] \[View] System configuration view \[Notes] Locked for 5 minutes by default.  \[Use Cases] \[Command] local-user retry-count count no local-user retry-count \[Purpose] Configure a limit on the number of consecutive incorrect password entries for local users \[Parameter] \[View] System configuration view \[Notes] By default, 5 attempts are allowed \[Use Cases] \[Command] local-user password-control enable no local-user password-control enable \[Purpose] Configure local user password complexity function \[View] System configuration view \[Notes] To prevent passwords from being cracked by malicious users through brute-force attacks, you can configure the complexity requirements for local user passwords.

Local User Configuration

 \[Command] show aaa \[Purpose] View the authentication, authorization and billing settings configured in the network node \[View] System view \[Use Cases] \[Command] aaa accounting command {tacacs+|radius|local|default} \[Purpose] Configure AAA Audit Method \[Parameter] \[View] System configuration view \[Notes] After enabling TACACS+ or RADIUS auditing, commands executed by users at the command line will be logged on the TACACS+ server or RADIUS server.  \[Use Cases] \[Command] aaa authentication debug enable no aaa authentication debug enable \[Purpose] Enable user authentication debug information \[View] System configuration view \[Notes] When users enable authentication debug information, corresponding authentication details for each user will be logged to the /var/log/syslog file during the authentication process.

AAA Configuration

 \[Command] show tacacs show tacacs config \[Purpose] Display terminal TACACS+ configuration information.  \[View] System view \[Notes] After modifying device configurations, you can use this command to view information such as the authentication type, timeout period, and communication key for the TACACS terminal.

TACACS Configuration

User Access And Authentication

delete-span-style

Enterprise & Campus Network

About This Manual

Overview of NETCONF

Applicable Switch Models

AsterNOS Datastores

Subtree Filtering

NETCONF Operations

Capabilities

 User Manual Overview

copp

datastores

dhcp-relay

dhcp-server

dhcp-snooping

disagnosis

festure-control

hash

igmp-mld-snooping

interfaces

ipsg

isolation-group

kdump

l2pt

lldp

local-user

loopback-detect

mac-security

mgmt-interface

mirror

monitor-link

nd-snooping

nexthop

portchannels

ports

radius

radv

raguard

savi

sflow

snmp

static-route

storm-suppress

syncE

syslog

system-config

system-information

system

tacacs

time-range

traffic-behavior

user-bind

vlan-translation

vlan

ietf-netconf-monitoring

YANG API Reference

COPP

Interface

Layer2

Layer3

User Access & Authentication

Monitoring

Multicast

System

Mac‑Security

SyncE

NETCONF Examples

NETCONF Configuration Guide

Preface

Applicable Hardware Models

Basic Configuration

Ethernet Interface Configuration

VLAN Configuration

MAC Address Table Configuration

QinQ Configuration

MSTP Configuration

Ethernet Link Aggregation Configuration

L2PT Configuration

Ethernet Switching Configuration

DHCP Server Configuration

DHCP  Relay Configuration

DHCP Snooping Configuration

ND Snooping Configuration

IP Service Configuration

Policy Route Configuration

IGMP Snooping Configuration

MLD Snooping Configuration

Multicast VLAN Configuration

IGMPv3 Configuration

Querier Configuration

IP Multicast Configuration

ACL Configuration

ARP Attack Detection Configuration

IPSG Configuration

SAVI Configuration

RA Guard Configuration

Security Configuration

QoS Configuration

Traffic Mirroring Configuration

SNMP Configuration

Network Management and Monitoring Configuration

Configuration Guide

Device Management

Interface Management

MAC Configuration

Interface Isolation Group Configuration

LLDP Configuration

Link Aggregation Configuration

MC-LAG Configuration

STP Configuration

URPF Configuration

Loopback Detection Configuration

Ethernet Switching

IPv4 Configuration

ARP Configuration

DHCP Relay Configuration

IPv6 Configuration

IP Service

ISIS Configuration

OSPFv2 Configuration

OSPFv3 Configuration

BGP Configuration

IP Route

IP Multicast

Reliability Configuration

MAC Detection Configuration

ARP Detection Configuration

IPv6 RA Guard Configuration

User Binding Rule Configuration

Traffic Suppression And Storm Control Configuration

Copp Speed limit

Port Security

Syslog Configuration

SFLOW Configuration

Mirror Configuration

Network Management And Monitoring

PTP Configuration

SyncE Configuration

MACsec Configuration

SRv6 Tunnel Configuration

Command Line Reference