Decoding Configuration

decoding configuration decoding configuration in npb scenarios, some messages require the decoding switch to be turned on before five element matching can be performed table 1 mpls decoding basic configuration table 1 mpls decoding basic configuration operation command description enter system configuration view configure enter npb configuration view npb enable mpls decoding parse over mpls enable enables filtering of inner layer fields for mpls/mpls + pw messages supported rule matching fields for mpls packets supported rule matching fields for mpls packets after enabling mpls decoding, the rule matching items supported by common mpls packets are as follows table 2 table 2 supported rule matching fields for mpls packets supported rule matching fields for mpls packets mpls packets supported rule matching items description mpls + ipv4 l2, ex, l3(src ip, dst ip, src port, dst port, ip protocol) mpls + eth + (vlans) + ipv4 l2, ex, l3(src mac, dst mac, ethertype, src ip, dst ip, src port, dst port, ip protocol) mpls + pw + eth + (vlans) + ipv4 l2, ex, l3(src mac, dst mac, ethertype, src ip, dst ip, src port, dst port, ip protocol) mpls + eth + lacp l2, ex, l3(src mac, dst mac, ethertype) mpls + ipv6 l2, ex, l3v6(src ip, dst ip, src port, dst port, ip protocol) only support l2,ex,l3 default forward on cx102s mpls + pw + eth + (vlans) + ipv6 l2, ex, l3v6(src mac, dst mac, ethertype, src ip, dst ip, src port, dst port, ip protocol) mpls + eth + (vlans) + ipv6 l2, ex, l3v6(src mac, dst mac, ethertype, src ip, dst ip, src port, dst port, ip protocol)