WebUI Overview

overview overview this page mainly displays some device status, which is mainly categorized into link status, system information, system status, temperature, fan, power supply link state link state the link status page displays the port distribution of the device and distinguishes whether the current interface is up or not by different colors hovering over a port displays detailed information about the port, such as module information, interface statistics, and threshold information for module related parameters for reference system information system information in the system information column, the current system related content will be displayed, in which ip/host name is the ip and host name of the sonic system, and the member id indicates the unique identifier number of the device, which is mainly used in networking scenarios to distinguish different devices version refers to the sonic version number in the first half of the column, and the npb version related information in the second half of the column, and the running time refers to the running time of the sonic system until now system status system status the cpu and memory utilization will be displayed in the system status bar when the cpu and memory utilization exceeds 80% it needs to be concerned and the statistic will turn red t t emp emp in the temperature column displays the current hardware temperature at various locations, where the right fan, the left fan describes the temperature of the left and right sides of the rear view as a reference to the cx206 for example, the left fan refers to the f1 fan, the right fan refers to the f3 fan fan fan the current fan status is displayed in the fan column, where the fan id corresponds to the silkscreen image on the back of the hardware, as shown below the presence information is divided into presence and absence, presence identifies that the current fan is working normally, absence indicates that there is no fan in the current position or the fan is faulty the time indicates the time when the bottom layer feeds back this state rpm according to indicate the current fan speed, the fan speed will be automatically adjusted with temperature p p ower ower the power status is displayed in the power column, where the power id corresponds to the silkscreen image on the back of the hardware, as shown below the power supply bar will display the output voltage and current normally, with the input and output power, temperature, and grayed out when the power supply is not in place total throughput total throughput you can select the information to be counted based on the port or the whole machine and display it in a composite in the chart, in which 24 pieces of information are retained by hour for 1 day and 15 pieces of information are retained by minute for 15 minutes