System Configuration

activity log global configuration activity log global configuration enter the server ip to upload syslog logs to the specified remote server activity log system log activity log system log this interface allows you to manage the logs and download or delete them activity log warning log activity log warning log this interface collects port status up/down alarms, cpu usage alarms, memory usage alarms, and port rate threshold alarms from syslog messages the cpu and memory usage thresholds are configured at the snmp trap settings (default is 80%), while port rate thresholds are configured in the interface settings (default is 80%) it also supports querying alarm logs within a specific time range s s ystem time ystem time the current system time can be adjusted by ntp/manual configuration and time zone setting is available the ntp time synchronization of cx102s requires you to configure the corresponding commands on the service port connected to the ntp server in order to connect to the ntp server, please refer to the cx command line manual startup config & reboot startup config & reboot this page allows you to save the current configuration, import and export the current saved configuration, and support rebooting the whole device in the current page the exported configuration can be downloaded directly from your browser exported configurations can be imported for quick recovery when no other configurations are available for the current device the device provides two ways to save the configuration cycle, namely save interval and timed save, both configurations are independent and saved in different folders, both will save a copy of the current configuration when you click save the save interval is automatically saved when the saved interval period expires, with a minimum interval time of 20 minutes timed save is automatically saved when the timer expires the maximum number of saved configurations is 20, and the earliest saved configuration will be deleted after it exceeds the maximum number of saved configurations, and the save path is /etc/npb/period save path network configuration network configuration this page allows you to configure the management network port of the device, which supports ipv4/ipv6, and at the same time, you can configure the gateway, cx102s needs to select a panel port, generally interface ethernet1 as the management port device upgrade device upgrade this page allows you to upgrade packet broker online, click upload package to select the packet broker image file to be upgraded after uploading the image, it will be displayed at the bottom, you can delete the image and other management operations, after checking the box, the start installation button will appear after uploading the image and clicking start installation, the device will be installed automatically and will jump to the homepage after successful installation note the upgrade performs an autosave operation and reboots the entire device at the same time