DAI

此内容尚不支持你的语言。

This chapter provides examples on how to use Netconf to manage DAI configurations on AsterNOS devices.

Get Current DAI Configurations

Request example to get all DAI configurations via get-config with subtree filter.

<filter type="subtree">
  <top>
    <dai/>
  </top>
</filter>

Response example

<data xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
  <top>
    <dai>
      <interfaces>
        <interface>
          <name>Ethernet1</name>
          <enable>true</enable>
        </interface>
        <interface>
          <name>Vlan100</name>
          <enable>true</enable>
          <trusted-interfaces>Ethernet1</trusted-interfaces>
          <trusted-interfaces>Ethernet2</trusted-interfaces>
        </interface>
      </interfaces>
    </dai>
  </top>
</data>

Set DAI Configuration of Interface

Request example to set DAI configuration of interface to enabled via edit-config.

<config>
  <top>
    <dai>
      <interfaces>
        <interface>
          <name>Ethernet1</name>
          <enable>true</enable>
        </interface>
        <interface>
          <name>Vlan100</name>
          <enable>true</enable>
          <trusted-interfaces>Ethernet2</trusted-interfaces>
          <trusted-interfaces>Ethernet3</trusted-interfaces>
        </interface>
      </interfaces>
    </dai>
  </top>
</config>

Response example

<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="urn:uuid:bb24faf4-2dba-4801-bff1-1442572b985f">
  <ok/>
</rpc-reply>

Request example to set DAI configuration of interface to trust-enabled via edit-config.

<config>
  <top>
    <dai>
      <interfaces>
        <interface>
          <name>Ethernet1</name>
          <trust-enable>true</trust-enable>
        </interface>
      </interfaces>
    </dai>
  </top>
</config>

Response example

<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="urn:uuid:fcc408de-478d-41d7-b7c0-04aa28e5b649">
  <ok/>
</rpc-reply>

Delete DAI Configuration

Request example to delete DAI configuration of interface via edit-config.

<config>
  <top>
    <dai>
      <interfaces>
        <interface operation="delete">
          <name>Ethernet1</name>
        </interface>
      </interfaces>
    </dai>
  </top>
</config>

Response example

<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="urn:uuid:8e4348a5-1175-44f1-b104-3ea41dab237b">
  <ok/>
</rpc-reply>