poe

AsterNOS YANG Model for Power Over Ethernet(POE).

module: asternos-poe
  +--rw poe
     +--rw poe_max_power?   uint32

  augment /if:interfaces/if:interface:
    +--rw poe
       +--rw enable-mode?            enumeration
       +--rw delay?                  uint16
       +--rw priority?               enumeration
       +--rw max-power?              enumeration
       +--rw legacy-detect?          boolean
       +--rw power-off-time-range?   -> /time-range:time-ranges/time-range/name

  rpcs:
    +---x reinitialize-poe
    |  +--ro output
    |     +--ro data?   <anydata>
    +---x show-interface-poe-diagnose
    |  +--ro output
    |     +--ro data?   <anydata>
    +---x show-interface-poe-status
       +---w input
       |  +---w interface-name?   cmn:ethernet-port-name
       |  +---w detail?           boolean
       +--ro output
          +--ro data?   <anydata>

Resources

Resource List

Path	Access
/poe	Read-Write
/poe/poe_max_power	Read-Write
/?/interfaces/interface/poe	Read-Write
/?/interfaces/interface/poe/enable-mode	Read-Write
/?/interfaces/interface/poe/delay	Read-Write
/?/interfaces/interface/poe/priority	Read-Write
/?/interfaces/interface/poe/max-power	Read-Write
/?/interfaces/interface/poe/legacy-detect	Read-Write
/?/interfaces/interface/poe/power-off-time-range	Read-Write

Detailed Nodes

/poe

Path

/poe

Node Type

container

Description

Config the global POE setting for device

Access

Read-Write

/poe/poe_max_power

Path

/poe/poe_max_power

Node Type

leaf

Description

Set max poe power supply of the system.

This operation may power off some PD.

102S_HPW1 series: 1..150.

204Y_HPW1 series: 1..370.

204Y_HPW2 series: 1..740.

206Y_HPW4 series: 1..1440.

206Y_HPW8 series: 1..2880.

Access

Read-Write

Data Type

Constraints

Valid range: 1 to 2880

/?/interfaces/interface/poe

Path

/?/interfaces/interface/poe

Node Type

container

Description

poe function of interface.

Access

Read-Write

/?/interfaces/interface/poe/enable-mode

Path

/?/interfaces/interface/poe/enable-mode

Node Type

leaf

Description

The poe enable mode of interface.

enable: port POE enable.

high_inrush: port POE enable with ignored inrush check. At the end of port power up flow, ILIM state is ignored and the port will continue to regular ON state.

force: port POE enable withh force power.To supply power to non-compliant PDs that would otherwise be rejected by the standard handshake. Force power mode presents a significant risk of damage to legacy non-PoE devices if connected, as it removes the intrinsic safety protection. It should be enabled only on ports connected to known PoE-capable equipment.

Access

Read-Write

Data Type

Constraints

Enumeration with options:

• disable
• enable
• high-inrush
• force

/?/interfaces/interface/poe/delay

Path

/?/interfaces/interface/poe/delay

Node Type

leaf

Description

This command is used to delay the activation of Power over Etthernet (POE) power supply on an interface based on actual usage requirements. When the uplink link state stabilizes, andthe protocols are running correctly, PoE power is supplied to the connected POE devices. This delay mechanism is usefulfor ensuring that PoE devices receive power only when the network is stable and ready to support them.

Access

Read-Write

Data Type

Constraints

Valid range: 0 to 3600

/?/interfaces/interface/poe/priority

Path

/?/interfaces/interface/poe/priority

Node Type

leaf

Description

Set poe power supply priority of this interface.

Access

Read-Write

Data Type

Constraints

Enumeration with options:

• low
• high
• critical

/?/interfaces/interface/poe/max-power

Path

/?/interfaces/interface/poe/max-power

Node Type

leaf

Description

Set Maximum poe power supply, WARNING: not support 90w currently.

Access

Read-Write

Data Type

Constraints

Enumeration with options:

• 15w
• 30w
• 30w-at
• 60w
• 90w

/?/interfaces/interface/poe/legacy-detect

Path

/?/interfaces/interface/poe/legacy-detect

Node Type

leaf

Description

Set poe legacy detection

Access

Read-Write

Data Type

Constraints

Valid in [true, false]

/?/interfaces/interface/poe/power-off-time-range

Path

/?/interfaces/interface/poe/power-off-time-range

Node Type

leaf

Description

Set poe power-off period rules.

Access

Read-Write

Data Type

Constraints

LeafRef pointing to: asternos-poe-base:poe-config/poe/leafref