跳转到内容
Ask AI

RPCs

此内容尚不支持你的语言。

PathAccess
/config-vlan-group/inputRead-Write
/config-vlan-group/input/vlan-rangesRead-Write
/config-vlan-group/input/mac-limitRead-Write
/config-vlan-group/input/mac-learningRead-Write
/config-vlan-group/input/descriptionRead-Write
/config-vlan-group/input/unknown-unicast-actionRead-Write
/config-vlan-group/input/unknown-multicast-actionRead-Write
/config-vlan-group/input/broadcast-actionRead-Write
/config-vlan-group/input/stp-ignoredRead-Write
/config-vlan-group/input/flapping-detectRead-Write
/config-vlan-group/input/flapping-actionRead-Write
/config-vlan-group/input/flapping-agingRead-Write
/config-vlan-group/input/flapping-levelRead-Write
/config-vlan-group/input/igmp-mld-snoopingRead-Write
/config-vlan-group/input/igmp-mld-snooping/igmp-snoopingRead-Write
/config-vlan-group/input/igmp-mld-snooping/igmp-snooping/snoopingRead-Write
/config-vlan-group/input/igmp-mld-snooping/igmp-snooping/snooping/enableRead-Write
/config-vlan-group/input/igmp-mld-snooping/igmp-snooping/snooping/fast-leaveRead-Write
/config-vlan-group/input/igmp-mld-snooping/igmp-snooping/snooping/proxy-enableRead-Write
/config-vlan-group/input/igmp-mld-snooping/igmp-snooping/snooping/querier-enableRead-Write
/config-vlan-group/input/igmp-mld-snooping/igmp-snooping/snooping/querier-ipRead-Write
/config-vlan-group/input/igmp-mld-snooping/igmp-snooping/snooping/versionRead-Write
/config-vlan-group/input/igmp-mld-snooping/igmp-snooping/snooping/query-intervalRead-Write
/config-vlan-group/input/igmp-mld-snooping/igmp-snooping/snooping/query-max-response-timeRead-Write
/config-vlan-group/input/igmp-mld-snooping/igmp-snooping/snooping/robustnessRead-Write
/config-vlan-group/input/igmp-mld-snooping/igmp-snooping/snooping/last-member-query-intervalRead-Write
/config-vlan-group/input/igmp-mld-snooping/igmp-snooping/mrouterRead-Write
/config-vlan-group/input/igmp-mld-snooping/igmp-snooping/mrouter/mrouter-agingRead-Write
/config-vlan-group/input/igmp-mld-snooping/igmp-snooping/mrouter/mrouter-interfacesRead-Write
/config-vlan-group/input/igmp-mld-snooping/igmp-snooping/mrouter/mrouter-interfaces/mrouter-interfaceRead-Write
/config-vlan-group/input/igmp-mld-snooping/igmp-snooping/mrouter/mrouter-interfaces/mrouter-interface/interfaceRead-Write
/config-vlan-group/input/igmp-mld-snooping/igmp-snooping/mrouter/mrouter-interfaces/mrouter-interface/typeRead-Write
/config-vlan-group/input/igmp-mld-snooping/igmp-snooping/mvlanRead-Write
/config-vlan-group/input/igmp-mld-snooping/igmp-snooping/mvlan/user-vlansRead-Write
/config-vlan-group/input/igmp-mld-snooping/mld-snoopingRead-Write
/config-vlan-group/input/igmp-mld-snooping/mld-snooping/snoopingRead-Write
/config-vlan-group/input/igmp-mld-snooping/mld-snooping/snooping/enableRead-Write
/config-vlan-group/input/igmp-mld-snooping/mld-snooping/snooping/fast-leaveRead-Write
/config-vlan-group/input/igmp-mld-snooping/mld-snooping/snooping/proxy-enableRead-Write
/config-vlan-group/input/igmp-mld-snooping/mld-snooping/snooping/querier-enableRead-Write
/config-vlan-group/input/igmp-mld-snooping/mld-snooping/snooping/querier-ipRead-Write
/config-vlan-group/input/igmp-mld-snooping/mld-snooping/snooping/versionRead-Write
/config-vlan-group/input/igmp-mld-snooping/mld-snooping/snooping/query-intervalRead-Write
/config-vlan-group/input/igmp-mld-snooping/mld-snooping/snooping/query-max-response-timeRead-Write
/config-vlan-group/input/igmp-mld-snooping/mld-snooping/snooping/robustnessRead-Write
/config-vlan-group/input/igmp-mld-snooping/mld-snooping/snooping/last-member-query-intervalRead-Write
/config-vlan-group/input/igmp-mld-snooping/mld-snooping/mrouterRead-Write
/config-vlan-group/input/igmp-mld-snooping/mld-snooping/mrouter/mrouter-agingRead-Write
/config-vlan-group/input/igmp-mld-snooping/mld-snooping/mrouter/mrouter-interfacesRead-Write
/config-vlan-group/input/igmp-mld-snooping/mld-snooping/mrouter/mrouter-interfaces/mrouter-interfaceRead-Write
/config-vlan-group/input/igmp-mld-snooping/mld-snooping/mrouter/mrouter-interfaces/mrouter-interface/interfaceRead-Write
/config-vlan-group/input/igmp-mld-snooping/mld-snooping/mrouter/mrouter-interfaces/mrouter-interface/typeRead-Write
/config-vlan-group/input/igmp-mld-snooping/mld-snooping/mvlanRead-Write
/config-vlan-group/input/igmp-mld-snooping/mld-snooping/mvlan/user-vlansRead-Write
/config-vlan-group/input/igmp-mld-snooping/group-limitsRead-Write
/config-vlan-group/input/igmp-mld-snooping/group-limits/group-limitRead-Write
/config-vlan-group/input/igmp-mld-snooping/group-limits/group-limit/interfaceRead-Write
/config-vlan-group/input/igmp-mld-snooping/group-limits/group-limit/max-groupRead-Write
/config-vlan-group/input/interfacesRead-Write
/config-vlan-group/input/interfaces/interfaceRead-Write
/config-vlan-group/input/interfaces/interface/nameRead-Write
/config-vlan-group/input/interfaces/interface/statusRead-Write
/config-vlan-group/input/router-advertisementRead-Write
/config-vlan-group/input/router-advertisement/managed-flagRead-Write
/config-vlan-group/input/router-advertisement/other-config-flagRead-Write
/config-vlan-group/input/router-advertisement/link-mtuRead-Write
/config-vlan-group/input/router-advertisement/on-link-flagRead-Write
/config-vlan-group/input/router-advertisement/autonomous-flagRead-Write
/config-vlan-group/input/router-advertisement/prefixesRead-Write
/config-vlan-group/input/router-advertisement/prefixes/prefixRead-Write
/config-vlan-group/input/router-advertisement/rdnssesRead-Write
/config-vlan-group/input/router-advertisement/rdnsses/rdnssRead-Write
/config-vlan-group/input/router-advertisement/routesRead-Write
/config-vlan-group/input/router-advertisement/routes/routeRead-Write
/config-vlan-group/input/router-advertisement/routes/preferredRead-Write
/config-vlan-group/input/switchportsRead-Write

Path

/config-vlan-group/input

Node Type

container

Access

Read-Write

Path

/config-vlan-group/input/vlan-ranges

Node Type

leaf

Description

Ranges of VLAN IDs, e.g. 100-200,300-400

Access

Read-Write

Data Type

<YANG type vlan-range>

Constraints

Type definition representing a range of single-tagged VLANs. A range is specified as x-y where x and y are valid VLAN IDs (1 <= vlan-id <= 4094). The range is assumed to be inclusive, such that any VLAN-ID matching x <= VLAN-ID <= y falls within the range. If there is more than one range, use the expression x1-y1,x2-y2

Path

/config-vlan-group/input/mac-limit

Node Type

leaf

Description

Limit the number of dynamic MAC addresses to be learned: when the mac number reaches the threshold, dynamic MAC addresses are no longer learned. 0 means no limit.

Access

Read-Write

Data Type

<YANG type uint32>

Constraints

Valid range: 0 to 32000

Path

/config-vlan-group/input/mac-learning

Node Type

leaf

Description

Set mac-learning mode for vlan, if disable, vlan will not learn mac

Access

Read-Write

Data Type

<YANG type boolean>

Constraints

Valid in [true, false]

Path

/config-vlan-group/input/description

Node Type leaf

Description

Set textual description of the vlan

Access

Read-Write

Data Type

<YANG type string>

Constraints

String with length: 1 to 127

/config-vlan-group/input/unknown-unicast-action

Section titled “/config-vlan-group/input/unknown-unicast-action”

Path

/config-vlan-group/input/unknown-unicast-action

Node Type

leaf

Description

Set the unknown unicast packets forwarding action

Access

Read-Write

Data Type

<YANG type vlan-bum-action>

Constraints

Enumeration with options: flood drop

/config-vlan-group/input/unknown-multicast-action

Section titled “/config-vlan-group/input/unknown-multicast-action”

Path

/config-vlan-group/input/unknown-multicast-action

Node Type

leaf

Description

Set the unknown multicast packets forwarding action

Access

Read-Write

Data Type

<YANG type vlan-bum-action>

Constraints

Enumeration with options: flood drop

Path

/config-vlan-group/input/broadcast-action

Node Type

leaf

Description

Set the broadcast packets forwarding action

Access

Read-Write

Data Type

<YANG type vlan-bum-action>

Constraints

Enumeration with options: flood drop

Path

/config-vlan-group/input/stp-ignored

Node Type

leaf

Description

Ignore STP BPDU. If enabled, the VLAN will not participate in the processing of the STP state machine.

Access

Read-Write

Data Type

<YANG type boolean>

Constraints

Valid in [true, false]

Path

/config-vlan-group/input/flapping-detect

Node Type

leaf

Description

Set mac flapping detection enable

Access

Read-Write

Data Type

<YANG type boolean>

Constraints

Valid in [true, false]

Path

/config-vlan-group/input/flapping-action

Node Type

leaf

Description

Set interface shutdown when mac-flapping is detected

Access

Read-Write

Data Type

<YANG type identityref>

Constraints

IdentityRef with options: none error-down

Path

/config-vlan-group/input/flapping-aging

Node Type

leaf

Description

Set mac-flapping detection time window in seconds

Access

Read-Write

Data Type

<YANG type uint16>

Constraints

Valid range: 10 to 7200

Path

/config-vlan-group/input/flapping-level

Node Type

leaf

Description

Set mac-flapping detection times

Access

Read-Write

Data Type

<YANG type uint16>

Constraints

Valid range: 5 to 500

/config-vlan-group/input/igmp-mld-snooping

Section titled “/config-vlan-group/input/igmp-mld-snooping”

Path

/config-vlan-group/input/igmp-mld-snooping

Node Type

container

Description

Config the igmp-snooping and mld-snooping of VLAN

Access

Read-Write

/config-vlan-group/input/igmp-mld-snooping/igmp-snooping

Section titled “/config-vlan-group/input/igmp-mld-snooping/igmp-snooping”

Path

/config-vlan-group/input/igmp-mld-snooping/igmp-snooping

Node Type

container

Access

Read-Write

/config-vlan-group/input/igmp-mld-snooping/igmp-snooping/snooping

Section titled “/config-vlan-group/input/igmp-mld-snooping/igmp-snooping/snooping”

Path

/config-vlan-group/input/igmp-mld-snooping/igmp-snooping/snooping

Node Type

container

Access

Read-Write

/config-vlan-group/input/igmp-mld-snooping/igmp-snooping/snooping/enable

Section titled “/config-vlan-group/input/igmp-mld-snooping/igmp-snooping/snooping/enable”

Path

/config-vlan-group/input/igmp-mld-snooping/igmp-snooping/snooping/enable

Node Type

leaf

Description

Enable IGMP or MLD Snooping for the VLAN.

Access

Read-Write

Data Type

<YANG type boolean>

Constraints

Valid in [true, false]

/config-vlan-group/input/igmp-mld-snooping/igmp-snooping/snooping/fast-leave

Section titled “/config-vlan-group/input/igmp-mld-snooping/igmp-snooping/snooping/fast-leave”

Path

/config-vlan-group/input/igmp-mld-snooping/igmp-snooping/snooping/fast-leave

Node Type

leaf

Description

Enable fast leave of multicast groups for member interfaces. When an IGMP or MLD Leave message from a host is received indicating the host is leaving a multicast group, the device will directly delete the corresponding multicast group forwarding table entry for that host without sending a specific group query message.

Access

Read-Write

Data Type

<YANG type boolean>

Constraints

Valid in [true, false]

/config-vlan-group/input/igmp-mld-snooping/mld-snooping/snooping/proxy-enable

Section titled “/config-vlan-group/input/igmp-mld-snooping/mld-snooping/snooping/proxy-enable”

Path

/config-vlan-group/input/igmp-mld-snooping/mld-snooping/snooping/proxy-enable

Node Type

leaf

Description

The proxy config of snooping. After enabling the IGMP Snooping Proxy feature, it can replace the router to send IGMP Query messages and receive IGMP Report/Leave messages sent by users, thereby alleviating the pressure on routing devices when there are a large number of terminals in the network.

Access

Read-Write

Data Type

<YANG type boolean>

Constraints

Valid in [true, false]

/config-vlan-group/input/igmp-mld-snooping/mld-snooping/snooping/querier-enable

Section titled “/config-vlan-group/input/igmp-mld-snooping/mld-snooping/snooping/querier-enable”

Path

/config-vlan-group/input/igmp-mld-snooping/mld-snooping/snooping/querier-enable

Node Type

leaf

Description

Enable IGMP or MLD querier. Configuring a querier on the device allows it to replace upstream devices in sending IGMP Query messages. The device will periodically broadcast IGMP Query messages to all interfaces within the VLAN (including router ports). If an IGMP querier already exists in the multicast network, enabing querier of device may trigger a re-election of the IGMP querier.

Access

Read-Write

Data Type

<YANG type boolean>

Constraints

Valid in [true, false]

/config-vlan-group/input/igmp-mld-snooping/mld-snooping/snooping/querier-ip

Section titled “/config-vlan-group/input/igmp-mld-snooping/mld-snooping/snooping/querier-ip”

Path

/config-vlan-group/input/igmp-mld-snooping/mld-snooping/snooping/querier-ip

Node Type

leaf

Description

Configure the source IP address of the IGMP or MLD Query message. When there are multiple queriers in the network, the querier selection can be controlled by modifying the source IP address of the device’s query message.

Access

Read-Write

Data Type

<YANG type ip-address>

Constraints

Multiple constraints:

  • The ipv6-address type represents an IPv6 address in full, mixed, shortened, and shortened-mixed notation. The IPv6 address may include a zone index, separated by a % sign.

If a system uses zone names that are not represented in UTF-8, then an implementation needs to use some mechanism to transform the local name into UTF-8. The definition of such a mechanism is outside the scope of this document. The zone index is used to disambiguate identical address values. For link-local addresses, the zone index will typically be the interface index number or the name of an interface. If the zone index is not present, the default zone of the device will be used. The canonical format of IPv6 addresses uses the textual representation defined in Section 4 of RFC 5952. The canonical format for the zone index is the numerical format as described in Section 11.2 of RFC 4007.

  • The ipv4-address type represents an IPv4 address in dotted-quad notation. The IPv4 address may include a zone index, separated by a % sign. If a system uses zone names that are not represented in UTF-8, then an implementation needs to use some mechanism to transform the local name into UTF-8. The definition of such a mechanism is outside the scope of this document.

The zone index is used to disambiguate identical address values. For link-local addresses, the zone index will typically be the interface index number or the name of an interface. If the zone index is not present, the default zone of the device will be used. The canonical format for the zone index is the numerical format

/config-vlan-group/input/igmp-mld-snooping/mld-snooping/snooping/version

Section titled “/config-vlan-group/input/igmp-mld-snooping/mld-snooping/snooping/version”

Path

/config-vlan-group/input/igmp-mld-snooping/mld-snooping/snooping/version

Node Type

leaf

Description

The version of the snooping. For igmp-snooping, the default version is v2. For mld-snooping, the default version is v1.

Access

Read-Write

Data Type

<YANG type enumeration>

Constraints

Enumeration with options:

  • v1
  • v2
  • v3

/config-vlan-group/input/igmp-mld-snooping/mld-snooping/snooping/query-interval

Section titled “/config-vlan-group/input/igmp-mld-snooping/mld-snooping/snooping/query-interval”

Path

/config-vlan-group/input/igmp-mld-snooping/mld-snooping/snooping/query-interval

Node Type

leaf

Description

The interval time between the general query messages sent by the device.

Access

Read-Write

Data Type

<YANG type uint16>

Constraints

Valid range: 1 to 18000

/config-vlan-group/input/igmp-mld-snooping/mld-snooping/snooping/query-max-response-time

Section titled “/config-vlan-group/input/igmp-mld-snooping/mld-snooping/snooping/query-max-response-time”

Path

/config-vlan-group/input/igmp-mld-snooping/mld-snooping/snooping/query-max-response-time

Node Type

leaf

Description

The maximum response time for query messages. It should be ensured that the interval time between the querier’s general query messages is greater than the maximum response time for downstream hosts to reply to the querier. Otherwise, it may result in the device mistakenly deleting member entries.

Access

Read-Write

Data Type

<YANG type uint16>

Constraints

Valid range: 1 to 25

/config-vlan-group/input/igmp-mld-snooping/mld-snooping/snooping/robustness

Section titled “/config-vlan-group/input/igmp-mld-snooping/mld-snooping/snooping/robustness”

Path

/config-vlan-group/input/igmp-mld-snooping/mld-snooping/snooping/robustness

Node Type

leaf

Description

The number of specific group query messages sent by the querier to avoid potential network packet loss. When an IGMP Leave message for a specific multicast group is received, a configured number of specific group query messages will be sent to inquire whether there are still members in that multicast group.

Access

Read-Write

Data Type

<YANG type uint8>

Constraints

Valid range: 1 to 255

/config-vlan-group/input/igmp-mld-snooping/mld-snooping/snooping/last-member-query-interval

Section titled “/config-vlan-group/input/igmp-mld-snooping/mld-snooping/snooping/last-member-query-interval”

Path

/config-vlan-group/input/igmp-mld-snooping/mld-snooping/snooping/last-member-query-interval

Node Type

leaf

Description

The interval time for the querier to send specific group query messages.

Access

Read-Write

Data Type

<YANG type uint16>

Constraints

Valid range: 100 to 25500

/config-vlan-group/input/igmp-mld-snooping/mld-snooping/mrouter

Section titled “/config-vlan-group/input/igmp-mld-snooping/mld-snooping/mrouter”

Path

/config-vlan-group/input/igmp-mld-snooping/mld-snooping/mrouter

Node Type

container

Description

The multicast router of vlan

Access

Read-Write

/config-vlan-group/input/igmp-mld-snooping/mld-snooping/mrouter/mrouter-aging

Section titled “/config-vlan-group/input/igmp-mld-snooping/mld-snooping/mrouter/mrouter-aging”

Path

/config-vlan-group/input/igmp-mld-snooping/mld-snooping/mrouter/mrouter-aging

Node Type

leaf

Description

The aging time for dynamic router ports within the VLAN. If no IGMP Query or PIM Hello messages are received within the dynamic router port aging time, the port is considered no longer to belong to a router port.

Access

Read-Write

Data Type

<YANG type uint16>

Constraints

Valid range: 1 to 1000

/config-vlan-group/input/igmp-mld-snooping/mld-snooping/mrouter/mrouter-interfaces

Section titled “/config-vlan-group/input/igmp-mld-snooping/mld-snooping/mrouter/mrouter-interfaces”

Path

/config-vlan-group/input/igmp-mld-snooping/mld-snooping/mrouter/mrouter-interfaces

Node Type

container

Access

Read-Write

/config-vlan-group/input/igmp-mld-snooping/mld-snooping/mrouter/mrouter-interfaces/mrouter-interface

Section titled “/config-vlan-group/input/igmp-mld-snooping/mld-snooping/mrouter/mrouter-interfaces/mrouter-interface”

Path

/config-vlan-group/input/igmp-mld-snooping/mld-snooping/mrouter/mrouter-interfaces/mrouter-interface

Node Type

list

Access

Read-Write

Constraints

Has local type

/config-vlan-group/input/igmp-mld-snooping/mld-snooping/mrouter/mrouter-interfaces/mrouter-interface/interface

Section titled “/config-vlan-group/input/igmp-mld-snooping/mld-snooping/mrouter/mrouter-interfaces/mrouter-interface/interface”

Path

/config-vlan-group/input/igmp-mld-snooping/mld-snooping/mrouter/mrouter-interfaces/mrouter-interface/interface

Node Type

leaf

Description

Configure the interface as a static router port for the VLAN.

Access

Read-Write

Data Type

<YANG type union>

/config-vlan-group/input/igmp-mld-snooping/mld-snooping/mrouter/mrouter-interfaces/mrouter-interface/type

Section titled “/config-vlan-group/input/igmp-mld-snooping/mld-snooping/mrouter/mrouter-interfaces/mrouter-interface/type”

Path

/config-vlan-group/input/igmp-mld-snooping/mld-snooping/mrouter/mrouter-interfaces/mrouter-interface/type

Node Type

leaf

Description

The type of the multicast router.

Access

Read-Write

Data Type

<YANG type enumeration>

Constraints

Enumeration with options: static dynamic

/config-vlan-group/input/igmp-mld-snooping/mld-snooping/mvlan

Section titled “/config-vlan-group/input/igmp-mld-snooping/mld-snooping/mvlan”

Path

/config-vlan-group/input/igmp-mld-snooping/mld-snooping/mvlan

Node Type

container

Description

The multicast vlan config. When users in different VLANs need to receive multicast data from the same multicast source, the device needs to replicate the data for each VLAN. In this case, you can configure a multicast VLAN by setting the user VLAN as the user VLAN and the router port VLAN as the multicast VLAN. The multicast VLAN will replicate the data to the user VLAN. IGMP Snooping must be enabled in both the multicast VLAN and the user VLAN.

Access

Read-Write

/config-vlan-group/input/igmp-mld-snooping/mld-snooping/mvlan/user-vlans

Section titled “/config-vlan-group/input/igmp-mld-snooping/mld-snooping/mvlan/user-vlans”

Path

/config-vlan-group/input/igmp-mld-snooping/mld-snooping/mvlan/user-vlans

Node Type

leaf-list

Description

The user vlan of snooping.

Access

Read-Write

Data Type

<YANG type vlan-id>

Constraints

Valid range: 1 to 4094

/config-vlan-group/input/igmp-mld-snooping/group-limits

Section titled “/config-vlan-group/input/igmp-mld-snooping/group-limits”

Path

/config-vlan-group/input/igmp-mld-snooping/group-limits

Node Type

container

Access

Read-Write

/config-vlan-group/input/igmp-mld-snooping/group-limits/group-limit

Section titled “/config-vlan-group/input/igmp-mld-snooping/group-limits/group-limit”

Path

/config-vlan-group/input/igmp-mld-snooping/group-limits/group-limit

Node Type

list

Description

The maximum number of multicast groups (igmp-snooping and mld-snooping) that an interface of vlan can learn. When the maximum number of learning groups for the interface is modified, forwarding groups that exceed the limit will be learned into the IGMP or MLD process memory but will not be programmed to the chip.

Access

Read-Write

/config-vlan-group/input/igmp-mld-snooping/group-limits/group-limit/interface

Section titled “/config-vlan-group/input/igmp-mld-snooping/group-limits/group-limit/interface”

Path

/config-vlan-group/input/igmp-mld-snooping/group-limits/group-limit/interface

Node Type

leaf

Description

The egress L2 port of the multicast group.

Access

Read-Write

Data Type

<YANG type union>

/config-vlan-group/input/igmp-mld-snooping/group-limits/group-limit/max-group

Section titled “/config-vlan-group/input/igmp-mld-snooping/group-limits/group-limit/max-group”

Path

/config-vlan-group/input/igmp-mld-snooping/group-limits/group-limit/max-group

Node Type

leaf

Description

The max number of the multicast group on this port of the vlan, default is 4095.

Access

Read-Write

Data Type

<YANG type uint16>

Constraints

Valid range: 1 to 4094

Path

/config-vlan-group/input/interfaces

Node Type

container

Description

Interface-specific loopback detection configuration for VLANs

Access

Read-Write

/config-vlan-group/input/interfaces/interface

Section titled “/config-vlan-group/input/interfaces/interface”

Path

/config-vlan-group/input/interfaces/interface

Node Type

list

Description

Interface entry for VLAN loopback configuration

Access

Read-Write

/config-vlan-group/input/interfaces/interface/name

Section titled “/config-vlan-group/input/interfaces/interface/name”

Path

/config-vlan-group/input/interfaces/interface/name

Node Type

leaf

Description

The name of the interface to be configured for loopback detection. User can configure loopback detection on Ethernet interfaces and VLAN. For example, Ethernet1, Ethernet2, Vlan10, Vlan20, etc.

Access

Read-Write

Data Type

<YANG type union>

/config-vlan-group/input/interfaces/interface/status

Section titled “/config-vlan-group/input/interfaces/interface/status”

Path

/config-vlan-group/input/interfaces/interface/status

Node Type

leaf

Description

Enable or disable loopback detection on the interface. When loopback detection is enabled, the system will periodically send loopback detection packets. If a loop is detected, the configured action will be applied to the interface. If this is applied to a VLAN, all ports in the VLAN will be affected: once a port in this VLAN receives a detection packet sending from this vlan’s members, it will trigger the configured action. If this is applied to an interface, only the specified interface will be affected: only when the interface receives a detection packet sending from itself, it will trigger the configured action.

Access

Read-Write

Data Type

<YANG type enumeration>

Constraints

Enumeration with options: enable disable

/config-vlan-group/input/router-advertisement

Section titled “/config-vlan-group/input/router-advertisement”

Path

/config-vlan-group/input/router-advertisement

Node Type

container

Description

Support for IPv6 Router Advertisements.

Access

Read-Write

Constraints

When condition: ../../name[starts-with(text(), ‘Vlan’)]

/config-vlan-group/input/router-advertisement/managed-flag

Section titled “/config-vlan-group/input/router-advertisement/managed-flag”

Path

/config-vlan-group/input/router-advertisement/managed-flag

Node Type

leaf

Description

The value to be placed in the ‘Managed address configuration’ flag field in the Router Advertisement.

Access

Read-Write

Data Type

<YANG type boolean>

Constraints

Valid in [true, false]

/config-vlan-group/input/router-advertisement/other-config-flag

Section titled “/config-vlan-group/input/router-advertisement/other-config-flag”

Path

/config-vlan-group/input/router-advertisement/other-config-flag

Node Type

leaf

Description

The value to be placed in the ‘Other configuration’ flag field in the Router Advertisement.

Access

Read-Write

Data Type

<YANG type boolean>

Constraints

Valid in [true, false]

Section titled “/config-vlan-group/input/router-advertisement/link-mtu”

Path

/config-vlan-group/input/router-advertisement/link-mtu

Node Type

leaf

Description

The value to be placed in MTU options sent by the router. A value of zero indicates that no MTU options are sent.

Access

Read-Write

Data Type

<YANG type mtu-type>

Constraints

Valid range: 1312 to 9216

Section titled “/config-vlan-group/input/router-advertisement/on-link-flag”

Path

/config-vlan-group/input/router-advertisement/on-link-flag

Node Type

leaf

Description

The value to be placed in the on-link flag (‘L-bit’) field in the Prefix Information option.

Access

Read-Write

Data Type

<YANG type boolean>

Constraints

Valid in [true, false]

/config-vlan-group/input/router-advertisement/autonomous-flag

Section titled “/config-vlan-group/input/router-advertisement/autonomous-flag”

Path

/config-vlan-group/input/router-advertisement/autonomous-flag

Node Type

leaf

Description

The value to be placed in the Autonomous Flag field in the Prefix Information option.

Access

Read-Write

Data Type

<YANG type boolean>

Constraints

Valid in [true, false]

/config-vlan-group/input/router-advertisement/prefixes

Section titled “/config-vlan-group/input/router-advertisement/prefixes”

Path

/config-vlan-group/input/router-advertisement/prefixes

Node Type

list

Description

Support for an advertised prefix entry.

Access

Read-Write

/config-vlan-group/input/router-advertisement/prefixes/prefix

Section titled “/config-vlan-group/input/router-advertisement/prefixes/prefix”

Path

/config-vlan-group/input/router-advertisement/prefixes/prefix

Node Type

leaf

Description

IPv6 address prefix.

Access Read-Write

Data Type

<YANG type ipv6-prefix>

Constraints

The ipv6-prefix type represents an IPv6 prefix. The prefix length is given by the number following the slash character and must be less than or equal to 128. A prefix length value of n corresponds to an IP address mask that has n contiguous 1-bits from the most significant bit (MSB) and all other bits set to 0. The canonical format of an IPv6 prefix has all bits of the IPv6 address set to zero that are not part of the IPv6 prefix. Furthermore, the IPv6 address is represented as defined in Section 4 of RFC 5952. The definition of ipv6-prefix does not require that bits, which are not part of the prefix, are set to zero. However, implementations have to return values in canonical format, which requires non-prefix bits to be set to zero. This means that 2001:db8::1/64 must be accepted as a valid value but it will be converted into the canonical format 2001:db8::/64.

/config-vlan-group/input/router-advertisement/rdnsses

Section titled “/config-vlan-group/input/router-advertisement/rdnsses”

Path

/config-vlan-group/input/router-advertisement/rdnsses

Node Type

list

Description

Support for an advertised prefix entry.

Access

Read-Write

/config-vlan-group/input/router-advertisement/rdnsses/rdnss

Section titled “/config-vlan-group/input/router-advertisement/rdnsses/rdnss”

Path

/config-vlan-group/input/router-advertisement/rdnsses/rdnss

Node Type

leaf

Description

IPv6 address.

Access

Read-Write

Data Type

<YANG type ipv6-address-no-zone>

Constraints

An IPv6 address without a zone index. This type, derived from the type ipv6-address, may be used in situations where the zone is known from the context and no zone index is needed.

/config-vlan-group/input/router-advertisement/routes

Section titled “/config-vlan-group/input/router-advertisement/routes”

Path

/config-vlan-group/input/router-advertisement/routes

Node Type

list

Description

Support for an advertised prefix entry.

Access

Read-Write

/config-vlan-group/input/router-advertisement/routes/route

Section titled “/config-vlan-group/input/router-advertisement/routes/route”

Path

/config-vlan-group/input/router-advertisement/routes/route

Node Type

leaf

Description

IPv6 address prefix.

Access Read-Write

Data Type

<YANG type ipv6-prefix>

Constraints

The ipv6-prefix type represents an IPv6 prefix. The prefix length is given by the number following the slash character and must be less than or equal to 128. A prefix length value of n corresponds to an IP address mask that has n contiguous 1-bits from the most significant bit (MSB) and all other bits set to 0. The canonical format of an IPv6 prefix has all bits of the IPv6 address set to zero that are not part of the IPv6 prefix. Furthermore, the IPv6 address is represented as defined in Section 4 of RFC 5952. The definition of ipv6-prefix does not require that bits, which are not part of the prefix, are set to zero. However, implementations have to return values in canonical format, which requires non-prefix bits to be set to zero. This means that 2001:db8::1/64 must be accepted as a valid value but it will be converted into the canonical format 2001:db8::/64.

/config-vlan-group/input/router-advertisement/routes/preferred

Section titled “/config-vlan-group/input/router-advertisement/routes/preferred”

Path

/config-vlan-group/input/router-advertisement/routes/preferred

Node Type

leaf

Description

The value to be placed in the Route Preference in the Route Information option. The preference associated with the default router, as either ‘low’, ‘medium’, or ‘high’.

Access

Read-Write

Data Type

<YANG type enumeration>

Constraints

Enumeration with options: low medium high

Path

/config-vlan-group/input/switchports

Node Type

leaf-list

Description

switchport trunk interface list

Access Read-Write

Data Type

<YANG type union>

PathAccess
/delete-vlan-group/inputRead-Write
/delete-vlan-group/input/vlan-rangesRead-Write

Path

/delete-vlan-group/input

Node Type

container

Access

Read-Write

Path

/delete-vlan-group/input/vlan-ranges

Node Type

leaf

Description

Ranges of VLAN IDs, e.g. 100-200,300-400

Access

Read-Write

Data Type

<YANG type vlan-range>

Constraints

Type definition representing a range of single-tagged VLANs. A range is specified as x-y where x and y are valid VLAN IDs (1 <= vlan-id <= 4094). The range is assumed to be inclusive, such that any VLAN-ID matching x <= VLAN-ID <= y falls within the range. If there is more than one range, use the expression x1-y1,x2-y2

PathAccess
/delete-vlan-group-switchports/inputRead-Write
/delete-vlan-group-switchports/input/vlan-rangesRead-Write
/delete-vlan-group-switchports/input/switchportsRead-Write

Path

/delete-vlan-group-switchports/input

Node Type

container

Access

Read-Write

/delete-vlan-group-switchports/input/vlan-ranges

Section titled “/delete-vlan-group-switchports/input/vlan-ranges”

Path

/delete-vlan-group-switchports/input/vlan-ranges

Node Type

leaf

Description

Ranges of VLAN IDs, e.g. 100-200,300-400

Access

Read-Write

Data Type

<YANG type vlan-range>

Constraints

Type definition representing a range of single-tagged VLANs. A range is specified as x-y where x and y are valid VLAN IDs (1 <= vlan-id <= 4094). The range is assumed to be inclusive, such that any VLAN-ID matching x <= VLAN-ID <= y falls within the range. If there is more than one range, use the expression x1-y1,x2-y2

/delete-vlan-group-switchports/input/switchports

Section titled “/delete-vlan-group-switchports/input/switchports”

Path

/delete-vlan-group-switchports/input/switchports

Node Type

leaf-list

Description

switchport trunk interface list

Access

Read-Write

Data Type

<YANG type union>

PathAccess
/show-vlan-summary/outputRead-Write
/show-vlan-summary/output/dataRead-Write

Path

/show-vlan-summary/output

Node Type

container

Access

Read-Write

Path

/show-vlan-summary/output/data

Node Type

anydata

Description

A table that shows information of all vlans

Access

Read-Write

PathAccess
/show-vlan-detail/inputRead-Write
/show-vlan-detail/input/vlan-idRead-Write
/show-vlan-detail/outputRead-Write
/show-vlan-detail/output/dataRead-Write

Path

/show-vlan-detail/input

Node Type

container

Access

Read-Write

Path

/show-vlan-detail/input/vlan-id

Node Type

leaf

Description

VLAN ID

Access

Read-Write

Data Type

<YANG type union>

Constraints

Valid range: 1 to 4094

Path

/show-vlan-detail/output

Node Type

container

Access

Read-Write

Path

/show-vlan-detail/output/data

Node Type

anydata

Description

A text that shows information of the specified vlan or all.

Access

Read-Write

PathAccess
/show-mac-flapping-config/inputRead-Write
/show-mac-flapping-config/input/vlan-idRead-Write
/show-mac-flapping-config/outputRead-Write
/show-mac-flapping-config/output/dataRead-Write
/show-mac-flapping-config/output/data/mac-flapping-configRead-Write
/show-mac-flapping-config/output/data/mac-flapping-config/vlan-idRead-Write
/show-mac-flapping-config/output/data/mac-flapping-config/flapping-detectRead-Write
/show-mac-flapping-config/output/data/mac-flapping-config/flapping-actionRead-Write
/show-mac-flapping-config/output/data/mac-flapping-config/flapping-agingRead-Write
/show-mac-flapping-config/output/data/mac-flapping-config/flapping-levelRead-Write

Path

/show-mac-flapping-config/input

Node Type

container

Access

Read-Write

Path

/show-mac-flapping-config/input/vlan-id

Node Type

leaf

Description

VLAN ID

Access

Read-Write

Data Type

<YANG type union>

Constraints

Valid range: 1 to 4094

Path

/show-mac-flapping-config/output

Node Type

container

Access

Read-Write

Path

/show-mac-flapping-config/output/data

Node Type

container

Access

Read-Write

/show-mac-flapping-config/output/data/mac-flapping-config

Section titled “/show-mac-flapping-config/output/data/mac-flapping-config”

Path

/show-mac-flapping-config/output/data/mac-flapping-config

Node Type

list

Description

MAC flapping configuration list

Access

Read-Write

/show-mac-flapping-config/output/data/mac-flapping-config/vlan-id

Section titled “/show-mac-flapping-config/output/data/mac-flapping-config/vlan-id”

Path

/show-mac-flapping-config/output/data/mac-flapping-config/vlan-id

Node Type

leaf

Description

VLAN ID

Access

Read-Write

Data Type

<YANG type vlan-id>

Constraints

Valid range: 1 to 4094

/show-mac-flapping-config/output/data/mac-flapping-config/flapping-detect

Section titled “/show-mac-flapping-config/output/data/mac-flapping-config/flapping-detect”

Path

/show-mac-flapping-config/output/data/mac-flapping-config/flapping-detect

Node Type

leaf

Description

Set mac flapping detection enable

Access

Read-Write

Data Type

<YANG type boolean>

Constraints

Valid in [true, false]

/show-mac-flapping-config/output/data/mac-flapping-config/flapping-action

Section titled “/show-mac-flapping-config/output/data/mac-flapping-config/flapping-action”

Path

/show-mac-flapping-config/output/data/mac-flapping-config/flapping-action

Node Type

leaf

Description

Set interface shutdown when mac-flapping is detected

Access

Read-Write

Data Type

<YANG type identityref>

Constraints

IdentityRef with options: none error-down

/show-mac-flapping-config/output/data/mac-flapping-config/flapping-aging

Section titled “/show-mac-flapping-config/output/data/mac-flapping-config/flapping-aging”

Path

/show-mac-flapping-config/output/data/mac-flapping-config/flapping-aging

Node Type

leaf

Description

Set mac-flapping detection time window in seconds

Access

Read-Write

Data Type

<YANG type uint16>

Constraints

Valid range: 10 to 7200

/show-mac-flapping-config/output/data/mac-flapping-config/flapping-level

Section titled “/show-mac-flapping-config/output/data/mac-flapping-config/flapping-level”

Path

/show-mac-flapping-config/output/data/mac-flapping-config/flapping-level

Node Type

leaf

Description

Set mac-flapping detection times

Access

Read-Write

Data Type

<YANG type uint16>

Constraints

Valid range: 5 to 500

PathAccess
/show-mac-flapping-status/inputRead-Write
/show-mac-flapping-status/input/vlan-idRead-Write
/show-mac-flapping-status/outputRead-Write
/show-mac-flapping-status/output/dataRead-Write
/show-mac-flapping-status/output/data/mac-flapping-statusRead-Write
/show-mac-flapping-status/output/data/mac-flapping-status/vlan-idRead-Write
/show-mac-flapping-status/output/data/mac-flapping-status/mac-addressRead-Write
/show-mac-flapping-status/output/data/mac-flapping-status/flapping-timesRead-Write
/show-mac-flapping-status/output/data/mac-flapping-status/last-updateRead-Write
/show-mac-flapping-status/output/data/mac-flapping-status/interface-statusRead-Write

Path

/show-mac-flapping-status/input

Node Type

container

Access

Read-Write

Path

/show-mac-flapping-status/input/vlan-id

Node Type

leaf

Description

VLAN ID

Access

Read-Write

Data Type

<YANG type union>

Constraints

Valid range: 1 to 4094

Path

/show-mac-flapping-status/output

Node Type

container

Access

Read-Write

Path

/show-mac-flapping-status/output/data

Node Type

container

Access

Read-Write

/show-mac-flapping-status/output/data/mac-flapping-status

Section titled “/show-mac-flapping-status/output/data/mac-flapping-status”

Path

/show-mac-flapping-status/output/data/mac-flapping-status

Node Type

list

Description

MAC flapping status list

Access

Read-Write

/show-mac-flapping-status/output/data/mac-flapping-status/vlan-id

Section titled “/show-mac-flapping-status/output/data/mac-flapping-status/vlan-id”

Path

/show-mac-flapping-status/output/data/mac-flapping-status/vlan-id

Node Type

leaf

Description

VLAN ID

Access

Read-Write

Data Type

<YANG type vlan-id>

Constraints

Valid range: 1 to 4094

/show-mac-flapping-status/output/data/mac-flapping-status/mac-address

Section titled “/show-mac-flapping-status/output/data/mac-flapping-status/mac-address”

Path

/show-mac-flapping-status/output/data/mac-flapping-status/mac-address

Node Type

leaf

Description

Show Migrated MAC addresses when MAC flapping.

Access

Read-Write

Data Type

<YANG type string>

/show-mac-flapping-status/output/data/mac-flapping-status/flapping-times

Section titled “/show-mac-flapping-status/output/data/mac-flapping-status/flapping-times”

Path

/show-mac-flapping-status/output/data/mac-flapping-status/flapping-times

Node Type

leaf

Description

Show number of migrations for a MAC address.

Access

Read-Write

Data Type

<YANG type uint16>

/show-mac-flapping-status/output/data/mac-flapping-status/last-update

Section titled “/show-mac-flapping-status/output/data/mac-flapping-status/last-update”

Path

/show-mac-flapping-status/output/data/mac-flapping-status/last-update

Node Type

leaf

Description

Show time info of last migration.

Access

Read-Write

Data Type

<YANG type string>

/show-mac-flapping-status/output/data/mac-flapping-status/interface-status

Section titled “/show-mac-flapping-status/output/data/mac-flapping-status/interface-status”

Path

/show-mac-flapping-status/output/data/mac-flapping-status/interface-status

Node Type

leaf

Description

Show interface status(whether the interface is shut down).

Access

Read-Write

Data Type

<YANG type string>

PathAccess
/clear-mac-flapping-status/inputRead-Write
/clear-mac-flapping-status/input/vlan-idRead-Write
/clear-mac-flapping-status/outputRead-Write
/clear-mac-flapping-status/output/resultRead-Write

Path

/clear-mac-flapping-status/input

Node Type

container

Access

Read-Write

Path

/clear-mac-flapping-status/input/vlan-id

Node Type

leaf

Description

VLAN ID

Access

Read-Write

Data Type

<YANG type union>

Constraints

Valid range: 1 to 4094

Path

/clear-mac-flapping-status/output

Node Type

container

Access

Read-Write

Path

/clear-mac-flapping-status/output/result

Node Type

leaf

Description

Operation result

Access

Read-Write

Data Type

<YANG type string>