Network Management
Network Management
Section titled “Network Management”Support for device management network configuration. The CX532-M and CX732-M models support USB network port (eth1) configuration and LAG configuration based on eth0 + eth1.
| Operation | Command | Description |
|---|---|---|
| Enter system configuration view | configure | |
| Enter Management Network Configuration view | interface mgmt {0|1|lag1} | 0: Management network via eth0 1: Management network via USB network port (eth1) lag1: Management network via LAG configured on eth0 and eth1 |
| Configure network | ip address IP { GW | gw GW mode {lacp|loadbalance}} | IP: Management network IP address, including subnet mask GW: Management network gateway {lacp|loadbalance}: LAG mode, required when configuring LAG. |
Note: After configuring LAG, the existing IP configurations on eth0 and eth1 will be cleared.