Skip to content
AsterNOS
Ask AI

Overall Traffic Configuration Logic

  1. Configure the port to be used through interface configuration, such as rate/FEC, to make the port UP
  2. Confirm the traffic input port, output port (create LAG), and ACL filtering rule group and type
  3. Prioritize configuring the ACL filtering rule group and adding specified rules. The rule content will specify the output port (LAG) of the traffic.
  4. Bind the ACL rule group to the traffic input port (LAG)
  5. After completing the above configuration, the specified ACL will be matched from the input port (LAG) and output to the panel port (LAG)
  6. If you configure the hash key or tunnel stripping of LAG on this basis, you must configure it on the input port.