IPSG-Netconf

此内容尚不支持你的语言。

IPSG

Resources Summary

YANG Path	get/get-config	edit-config	rpc
/ipsg	Y	merge, replace, create, delete	—
/ipsg/interfaces/{name}/{ip-type}	Y	merge, replace, create, delete	—

Examples

This chapter provides examples on how to use Netconf to manage IPSG configurations on AsterNOS devices.

Get Current IPSG Configurations

Request example to get all IPSG configurations via get-config with subtree filter.

<filter type="subtree">
  <top>
    <ipsg/>
  </top>
</filter>

Response example

<data xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
  <top>
    <ipsg xmlns="http://asterfusion.com/ns/yang/asternos-ipsg">
      <interfaces>
        <interface>
          <name>Ethernet1</name>
          <ip-type>v6</ip-type>
          <enable>true</enable>
        </interface>
        <interface>
          <name>Vlan100</name>
          <ip-type>v6</ip-type>
          <enable>true</enable>
          <trusted-interfaces>Ethernet2</trusted-interfaces>
          <trusted-interfaces>Ethernet3</trusted-interfaces>
        </interface>
        <interface>
          <name>Ethernet1</name>
          <ip-type>v4</ip-type>
          <enable>true</enable>
        </interface>
        <interface>
          <name>Vlan100</name>
          <ip-type>v4</ip-type>
          <enable>true</enable>
          <trusted-interfaces>Ethernet3</trusted-interfaces>
          <trusted-interfaces>Ethernet2</trusted-interfaces>
        </interface>
      </interfaces>
    </ipsg>
  </top>
</data>

Set IPSG Configuration of Interface

NOTE

‘enable’ and ‘trust-enable’ cannot be configured as true at the same time

IPSG configuration of interface must specify IP type.

Request example to set IPSG configuration of interface to enabled via edit-config.

<config>
  <top>
    <ipsg>
      <interfaces>
        <interface>
          <name>Ethernet1</name>
          <ip-type>v4</ip-type>
          <enable>true</enable>
        </interface>
        <interface>
          <name>Vlan100</name>
          <ip-type>v4</ip-type>
          <enable>true</enable>
          <trusted-interfaces>Ethernet2</trusted-interfaces>
          <trusted-interfaces>Ethernet3</trusted-interfaces>
        </interface>
        <interface>
          <name>Ethernet1</name>
          <ip-type>v6</ip-type>
          <enable>true</enable>
        </interface>
        <interface>
          <name>Vlan100</name>
          <ip-type>v6</ip-type>
          <enable>true</enable>
          <trusted-interfaces>Ethernet2</trusted-interfaces>
          <trusted-interfaces>Ethernet3</trusted-interfaces>
        </interface>
      </interfaces>
    </ipsg>
  </top>
</config>

Response example

<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="urn:uuid:b40b1881-532f-44e9-9db5-27ad280454b2">
  <ok/>
</rpc-reply>

Request example to set IPSG configuration of interface to trust-enabled via edit-config.

<config>
  <top>
    <ipsg>
      <interfaces>
        <interface>
          <name>Ethernet1</name>
          <ip-type>v6</ip-type>
          <trust-enable>true</trust-enable>
        </interface>
        <interface>
          <name>Ethernet1</name>
          <ip-type>v4</ip-type>
          <trust-enable>true</trust-enable>
        </interface>
      </interfaces>
    </ipsg>
  </top>
</config>

Response example

<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="urn:uuid:98421788-dd19-4dfa-a6cd-651a5a14fe6c">
  <ok/>
</rpc-reply>

Delete IPSG Configuration

Request example to delete IPSG configuration of interface via edit-config.

<config>
  <top>
    <ipsg>
      <interfaces>
        <interface operation="delete">
          <name>Ethernet1</name>
          <ip-type>v4</ip-type>
        </interface>
        <interface operation="delete">
          <name>Ethernet1</name>
          <ip-type>v6</ip-type>
        </interface>
      </interfaces>
    </ipsg>
  </top>
</config>

Response example

<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="urn:uuid:d76fc07a-6f40-442c-8748-543754dac541">
  <ok/>
</rpc-reply>

Properties Descriptions

Container for IPSG configurations

Tree Diagram

module: asternos-ipsg
  +--rw ipsg
     +--rw interfaces
        +--rw interface* [name ip-type]
           +--rw name                  union
           +--rw ip-type               enumeration
           +--rw enable?               boolean
           +--rw trust-enable?         boolean
           +--rw trusted-interfaces*   cmn:ethernet-port-name

Table of Properties

Name	Required	Type/Range	Description
ipsg	M		Path-only node, has no configurable value. Container for IPSG configurations.
interfaces	M		Path-only node, has no configurable value.
interface	M		Path-only node, has no configurable value. Configure IPSG interfaces based on VLAN or PORT. Note: ‘enable’ and ‘trust-enable’ cannot be configured as true at the same time
name	O	Ethernet name	Name of the interface.
ip-type	O	”v4" "v6”
enable	O	”true" "false”	Enable or disable the configuration for interface.
trust-enable	O	”true" "false”	Enable or disable the trust for ethernet interface. Only valid for ethernet interface, not VLAN interface. Suitable for configuration scenarios with multiple VLANs on the interface. When configured as true, trust any VLAN on the interface
trusted-interfaces	O	cmn:ethernet-port-name	List of trusted ethernet port or sub-ethernet interfaces for VLAN. Only valid for VLAN interface.

Interfaces

Tree Diagram

module: asternos-ipsg
  +--rw ipsg
     +--rw interfaces
        +--rw interface* [name ip-type]
           +--rw name                  union
           +--rw ip-type               enumeration
           +--rw enable?               boolean
           +--rw trust-enable?         boolean
           +--rw trusted-interfaces*   cmn:ethernet-port-name

Table of Properties

Name	Required	Type/Range	Description
interfaces	M		Path-only node, has no configurable value.
interface	M		Path-only node, has no configurable value. Configure IPSG interfaces based on VLAN or PORT. Note: ‘enable’ and ‘trust-enable’ cannot be configured as true at the same time
name	O	Ethernet name	Name of the interface.
ip-type	O	”v4" "v6”
enable	O	”true" "false”	Enable or disable the configuration for interface.
trust-enable	O	”true" "false”	Enable or disable the trust for ethernet interface. Only valid for ethernet interface, not VLAN interface. Suitable for configuration scenarios with multiple VLANs on the interface. When configured as true, trust any VLAN on the interface
trusted-interfaces	O	cmn:ethernet-port-name	List of trusted ethernet port or sub-ethernet interfaces for VLAN. Only valid for VLAN interface.