Ospfv3-Netconf

此内容尚不支持你的语言。

Ospfv3

Resources Summary

YANG Path	get/get-config	edit-config	rpc
/ospfv3-interfaces/{name}	Y	merge, replace, create, delete	—
/ospfv3/{vrf-name}	Y	merge, replace, create, delete	—
/ospfv3/{vrf-name}/areas/{area-id}	Y	merge, replace, create, delete	—
/ospfv3/{vrf-name}/areas/{area-id}/area-ranges/{ip-prefix}	Y	merge, replace, create, delete	—
/ospfv3/{vrf-name}/distribute-route/{protocol}	Y	merge, replace, create, delete	—
/ospfv3/{vrf-name}/spf	Y	merge	—
/show-ipv6-ospf6-database	—	—	Y
/show-ipv6-ospf6-interface	—	—	Y
/show-ipv6-ospf6-neighbor	—	—	Y
/show-ipv6-ospf6-redistribute	—	—	Y
/show-ipv6-ospf6-route	—	—	Y

Examples

Get ospfv3 Configuration On Device

Request example via rpc get-config

<filter type="subtree">
  <top>
    <ospfv3>
      <ospfv3-instance>
        <vrf-name>default</vrf-name>
      </ospfv3-instance>
    </ospfv3>
  </filter>

Reply example via rpc get-config

<data xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
  <top>
    <ospfv3 xmlns="http://asterfusion.com/ns/yang/asternos-ospfv3">
      <ospfv3-instance>
        <vrf-name>default</vrf-name>
        <enable>true</enable>
        <router-id>10.250.0.181</router-id>
        <auto-cost-reference-bandwidth>50</auto-cost-reference-bandwidth>
        <areas>
          <area>
            <area-id>0.0.0.100</area-id>
          </area>
          <area>
            <area-id>0.0.0.30</area-id>
            <area-ranges>
              <area-range>
                <ip-prefix>2005::1/64</ip-prefix>
                <cost>30</cost>
                <advertise>true</advertise>
              </area-range>
            </area-ranges>
          </area>
          <area>
            <area-id>0.0.0.40</area-id>
          </area>
          <area>
            <area-id>0.0.0.70</area-id>
          </area>
        </areas>
        <spf>
          <initial-delay>15</initial-delay>
          <initial-holdtime>30</initial-holdtime>
          <maximum-holdtime>40</maximum-holdtime>
        </spf>
        <distribute-route>
          <protocol>connected</protocol>
          <route-map>test_route_map</route-map>
        </distribute-route>
        <distribute-route>
          <protocol>static</protocol>
          <route-map>test_route_map</route-map>
        </distribute-route>
      </ospfv3-instance>
    </ospfv3>
  </data>

Create ospfv3 Global

<config><top>
  <ospfv3>
    <ospfv3-instance operation="create">
      <vrf-name>Vrf1</vrf-name>
      <router-id>10.10.10.10</router-id>
    </ospfv3-instance>
  </ospfv3>
</top></config>

Merge ospfv2 Global

<config><top>
  <ospfv3>
    <ospfv3-instance operation="merge">
      <vrf-name>Vrf1</vrf-name>
      <router-id>10.10.10.10</router-id>
    </ospfv3-instance>
  </ospfv3>
</top></config>

Delete ospfv3 Global

<config><top>
  <ospfv3>
    <ospfv3-instance operation="delete">
      <vrf-name>Vrf1</vrf-name>
    </ospfv3-instance>
  </ospfv3>
</top></config>

Create ospfv3 Distribute

<config><top>
  <ospfv3>
    <ospfv3-instance operation="create">
      <vrf-name>Vrf1</vrf-name>
      <distribute-route>
        <protocol>bgp</protocol>
        <route-map>test_route_map</route-map>
      </distribute-route>
    </ospfv3-instance>
  </ospfv3>
</top></config>

Merge ospfv3 Distribute

<config><top>
  <ospfv3>
    <ospfv3-instance>
      <vrf-name>Vrf1</vrf-name>
      <distribute-route operation="merge">
        <protocol>bgp</protocol>
        <route-map>test_route_map2</route-map>
      </distribute-route>
    </ospfv3-instance>
  </ospfv3>
</top></config>

Delete ospfv3 Distribute

<config><top>
  <ospfv3>
    <ospfv3-instance>
      <vrf-name>Vrf1</vrf-name>
      <distribute-route operation="delete">
        <protocol>bgp</protocol>
      </distribute-route>
    </ospfv3-instance>
  </ospfv3>
</top></config>

Create ospfv3 Area

<config><top>
  <ospfv3>
    <ospfv3-instance operation="create">
      <vrf-name>Vrf1</vrf-name>
      <areas>
        <area>
          <area-id>0.0.0.10</area-id>
        </area>
      </areas>
    </ospfv3-instance>
  </ospfv3>
</top></config>

Delete ospfv3 Area

<config><top>
  <ospfv3>
    <ospfv3-instance operation="delete">
      <vrf-name>Vrf1</vrf-name>
      <areas>
        <area>
          <area-id>0.0.0.10</area-id>
        </area>
      </areas>
    </ospfv3-instance>
  </ospfv3>
</top></config>

Get ospfv3 Configuration On Interface

Request example via rpc get-config

<filter type="subtree">
  <top>
    <ospfv3-interfaces/>
  </filter>

Reply example via rpc get-config

<data xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
  <top>
    <ospfv3-interfaces xmlns="http://asterfusion.com/ns/yang/asternos-ospfv3">
      <ospfv3-interface>
        <name>Ethernet3</name>
        <vrf-name>default</vrf-name>
        <area-id>0.0.0.10</area-id>
        <metric>50</metric>
        <dead-interval>50</dead-interval>
        <hello-interval>50</hello-interval>
        <mtu-ignore>true</mtu-ignore>
        <network-type>broadcast</network-type>
        <priority>50</priority>
        <retransmission-interval>50</retransmission-interval>
        <transmit-delay>50</transmit-delay>
      </ospfv3-interface>
    </ospfv3-interfaces>
  </data>

Create ospfv3 Interface

<config><top>
  <ospfv3-interfaces operation="create">
    <ospfv3-interface>
      <name>Ethernet1</name>
      <metric>50</metric>
      <dead-interval>50</dead-interval>
      <hello-interval>50</hello-interval>
      <mtu-ignore>true</mtu-ignore>
      <network-type>broadcast</network-type>
      <priority>50</priority>
      <retransmission-interval>50</retransmission-interval>
      <transmit-delay>50</transmit-delay>
    </ospfv3-interface>
  </ospfv3-interfaces>
</top></config>

Merge ospfv3 Interface

<config><top>
  <ospfv3-interfaces operation="merge">
    <ospfv3-interface>
      <name>Ethernet1</name>
      <metric>30</metric>
      <dead-interval>30</dead-interval>
      <hello-interval>30</hello-interval>
      <mtu-ignore>false</mtu-ignore>
      <network-type>broadcast</network-type>
      <priority>30</priority>
      <retransmission-interval>30</retransmission-interval>
      <transmit-delay>30</transmit-delay>
    </ospfv3-interface>
  </ospfv3-interfaces>
</top></config>

Delete ospfv3 Interface

<config><top>
  <ospfv3-interfaces>
    <ospfv3-interface operation="delete">
      <name>Ethernet3</name>
    </ospfv3-interface>
  </ospfv3-interfaces>
</top></config>

Properties Descriptions

Ospfv3 Interfaces

Tree Diagram

module: asternos-ospfv3
  +--rw ospfv3-interfaces
     +--rw ospfv3-interface* [name]
        +--rw name                       cmn:ospf-interface-name
        +--rw vrf-name?                  vrf:vrf-ref
        +--rw area-id?                   ospfv3-area-id
        +--rw metric?                    uint16
        +--rw dead-interval?             uint16
        +--rw hello-interval?            uint16
        +--rw mtu-ignore?                boolean
        +--rw network-type?              cmn:network-types
        +--rw priority?                  uint8
        +--rw retransmission-interval?   uint16
        +--rw transmit-delay?            uint16

Table of Properties

Name	Required	Type/Range	Description
ospfv3-interfaces	M		Path-only node, has no configurable value.
ospfv3-interface	M		Path-only node, has no configurable value.
name	O	cmn:ospf-interface-name	Name of interface.
vrf-name	O	vrf:vrf-ref	Name of VRF.
area-id	O	The ipv4-address type represents an IPv4 address in dotted-quad notation. The IPv4 address may include a zone index, separated by a % sign. If a system uses zone names that are not represented in UTF-8, then an implementation needs to use some mechanism to transform the local name into UTF-8. The definition of such a mechanism is outside the scope of this document. The zone index is used to disambiguate identical address values. For link-local addresses, the zone index will typically be the interface index number or the name of an interface. If the zone index is not present, the default zone of the device will be used. The canonical format for the zone index is the numerical format integer	Area ID for this network.
metric	O	1..65535	Cost value set to router-LSA’s metric field
dead-interval	O	1..65535	Interval time after which a neighbor is declared down.
hello-interval	O	1..65535	Set number of seconds for HelloInterval timer value.
mtu-ignore	O	”true" "false”	Enable mtu ignore.
network-type	O	cmn:network-types	Set network type.
priority	O	0..255	Set RouterPriority integer value.
retransmission-interval	O	1..65535	Set number of seconds for RxmtInterval timer value.
transmit-delay	O	1..65535	Set number of seconds for InfTransDelay value.

Top-level configuration for the OSPFv3 router

Tree Diagram

module: asternos-ospfv3
  +--rw ospfv3
     +--rw ospfv3-instance* [vrf-name]
        +--rw vrf-name                         vrf:vrf-ref
        +--rw enable?                          boolean
        +--rw router-id?                       inet:ipv4-address
        +--rw auto-cost-reference-bandwidth?   uint32
        +--rw areas
        |  +--rw area* [area-id]
        |     +--rw area-id        ospfv3-area-id
        |     +--rw area-ranges
        |        +--rw area-range* [ip-prefix]
        |           +--rw ip-prefix    ospfv3-range-address
        |           +--rw cost?        uint32
        |           +--rw advertise?   boolean
        +--rw spf
        |  +--rw initial-delay       uint32
        |  +--rw initial-holdtime    uint32
        |  +--rw maximum-holdtime    uint32
        +--rw distribute-route* [protocol]
           +--rw protocol     route-types-v6
           +--rw route-map?   string

Table of Properties

Name	Required	Type/Range	Description
ospfv3	M		Path-only node, has no configurable value. Top-level configuration for the OSPFv3 router.
ospfv3-instance	M		Path-only node, has no configurable value.
vrf-name	O	vrf:vrf-ref	Name of the VRF instance.
enable	O	”true" "false”	Enable OSPFv3
router-id	O	inet:ipv4-address	Router-id for the OSPF process.
auto-cost-reference-bandwidth	O	1..4294967	The reference bandwidth in terms of Mbits per second.
areas	M		Path-only node, has no configurable value.
area	M		Path-only node, has no configurable value. List of area objects.
area-id	O	The ipv4-address type represents an IPv4 address in dotted-quad notation. The IPv4 address may include a zone index, separated by a % sign. If a system uses zone names that are not represented in UTF-8, then an implementation needs to use some mechanism to transform the local name into UTF-8. The definition of such a mechanism is outside the scope of this document. The zone index is used to disambiguate identical address values. For link-local addresses, the zone index will typically be the interface index number or the name of an interface. If the zone index is not present, the default zone of the device will be used. The canonical format for the zone index is the numerical format integer
area-ranges	M		Path-only node, has no configurable value.
area-range	M		Path-only node, has no configurable value.
ip-prefix	M	The ipv6-prefix type represents an IPv6 prefix. The prefix length is given by the number following the slash character and must be less than or equal to 128. A prefix length value of n corresponds to an IP address mask that has n contiguous 1-bits from the most significant bit (MSB) and all other bits set to 0. The canonical format of an IPv6 prefix has all bits of the IPv6 address set to zero that are not part of the IPv6 prefix. Furthermore, the IPv6 address is represented as defined in Section 4 of RFC 5952. The definition of ipv6-prefix does not require that bits, which are not part of the prefix, are set to zero. However, implementations have to return values in canonical format, which requires non-prefix bits to be set to zero. This means that 2001:db8::1/64 must be accepted as a valid value but it will be converted into the canonical format 2001:db8::/64.	Designated IPv6 range.
cost	O	0..16777215	Set an explicit metric.
advertise	O	”true" "false”	Summarize intra area paths from specified area into one Type-3 summary-LSA.
spf	M		Path-only node, has no configurable value.
initial-delay	M	0..600000	Specifies the minimum amount of time to delay SPF calculation.
initial-holdtime	M	0..600000	Separated consecutive SPF calculations.
maximum-holdtime	M	0..600000	Maximum of holdtime.
distribute-route	M		Path-only node, has no configurable value.
protocol	O	”kernel" "connected" "local" "static" "ripng" "isis" "bgp" "nhrp" "table" "table-direct" "vnc" "babel" "openfabric”	Protocol to import.
route-map	O	string	Route map reference.

Area

Tree Diagram

module: asternos-ospfv3
  +--rw ospfv3

Area Range

Tree Diagram

module: asternos-ospfv3
  +--rw ospfv3

Distribute Route

Tree Diagram

module: asternos-ospfv3
  +--rw ospfv3

Spf

Tree Diagram

module: asternos-ospfv3
  +--rw ospfv3

Show Ipv6 Ospf6 Database

Tree Diagram

module: asternos-ospfv3

  rpcs:
    +---x show-ipv6-ospf6-database
       +--ro output
          +--ro data?   <anydata>

Table of Properties

Name	Required	Type/Range	Description
show-ipv6-ospf6-database	O
data	O		Show ipv6 ospf6 database information.

Show Ipv6 Ospf6 Interface

Tree Diagram

module: asternos-ospfv3

  rpcs:
    +---x show-ipv6-ospf6-interface
       +---w input
       |  +---w (options)?
       |     +--:(traffic)
       |     |  +---w traffic?     empty
       |     +--:(interface)
       |        +---w interface?   cmn:ospf-interface-name
       +--ro output
          +--ro data?   <anydata>

Table of Properties

Name	Required	Type/Range	Description
show-ipv6-ospf6-interface	O
traffic	O	empty	Display interface counter information.
interface	O	cmn:ospf-interface-name	Display information of specific interface.
data	O		Show ipv6 ospf6 interface information.

Show Ipv6 Ospf6 Neighbor

Tree Diagram

module: asternos-ospfv3

  rpcs:
    +---x show-ipv6-ospf6-neighbor
       +---w input
       |  +---w vrf?            vrf:vrf-ref
       |  +---w (options)?
       |     +--:(detail)
       |        +---w detail?   empty
       +--ro output
          +--ro data?   <anydata>

Table of Properties

Name	Required	Type/Range	Description
show-ipv6-ospf6-neighbor	O
vrf	O	vrf:vrf-ref	Name of VRF instance.
detail	O	empty	Display more details.
data	O		Show ipv6 ospf6 neighbor information.

Show Ipv6 Ospf6 Redistribute

Tree Diagram

module: asternos-ospfv3

  rpcs:
    +---x show-ipv6-ospf6-redistribute
       +--ro output
          +--ro data?   <anydata>

Table of Properties

Name	Required	Type/Range	Description
show-ipv6-ospf6-redistribute	O
data	O		Show ipv6 ospf6 redistributing External information.

Show Ipv6 Ospf6 Route

Tree Diagram

module: asternos-ospfv3

  rpcs:
    +---x show-ipv6-ospf6-route
       +--ro output
          +--ro data?   <anydata>

Table of Properties

Name	Required	Type/Range	Description
show-ipv6-ospf6-route	O
data	O		Show ipv6 route ospf6 information.