Mac-Scan-Netconf

此内容尚不支持你的语言。

Mac Scan

Resources Summary

YANG Path	get/get-config	edit-config	rpc
/mac-scan	Y	merge, replace, create, delete	—

Examples

This chapter provides examples on how to use Netconf to manage mac scan configurations on AsterNOS devices.

Mac Scan Global Configuration

Create and enable mac scan globally, set period, enable remove-on-timeout and remote via edit-config.

<config><top>
  <mac-scan xmlns="http://asterfusion.com/ns/yang/mac-scan" operation="create">
    <enabled>true</enabled>
    <period>100</period>
    <remove-on-timeout>true</remove-on-timeout>
    <remote>true</remote>
  </mac-scan>
</top></config>

<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="urn:uuid:a93d63b2-8c95-4480-86c8-60a431e7d6f2">
  <ok/>
</rpc-reply>

Update global mac scan period and remote via edit-config.

<config><top>
  <mac-scan xmlns="http://asterfusion.com/ns/yang/mac-scan" operation="merge">
    <period>200</period>
    <remote>false</remote>
  </mac-scan>
</top></config>

<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="urn:uuid:a93d63b2-8c95-4480-86c8-60a431e7d6f2">
  <ok/>
</rpc-reply>

Get global mac scan configuration via get-config.

<filter type="subtree">
  <top xmlns="http://asterfusion.com/ns/yang/asternos-interfaces">
    <mac-scan/>
  </top>
</filter>

<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="urn:uuid:fbf44465-b889-4bbf-8d8a-1f7769ee4033">
  <data>
    <top>
      <mac-scan xmlns="http://asterfusion.com/ns/yang/mac-scan">
        <enabled>true</enabled>
        <period>10</period>
        <remove-on-timeout>true</remove-on-timeout>
      </mac-scan>
    </top>
  </data>
</rpc-reply>

Delete global mac scan configuration via edit-config.

<config><top>
  <mac-scan xmlns="http://asterfusion.com/ns/yang/mac-scan" operation="delete"/>
</top></config>

<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="urn:uuid:a93d63b2-8c95-4480-86c8-60a431e7d6f2">
  <ok/>
</rpc-reply>

Mac Scan Vlan Interface Configuration

Enable mac scan on VLAN interface and set ip ranges via edit-config, then show via get-config.

<config>
  <top>
    <interfaces xmlns="http://asterfusion.com/ns/yang/asternos-interfaces">
      <interface>
        <name>Vlan300</name>
        <mac-scan-enabled>true</macsmac-scan-enabledcan>
        <mac-scan-ips>10.0.1.7/24</mac-scan-ips>
      </interface>
    </interfaces>
  </top>
</config>

<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="urn:uuid:a93d63b2-8c95-4480-86c8-60a431e7d6f2">
  <ok/>
</rpc-reply>

Clear VLAN mac scan ip ranges via edit-config.

<config>
  <top>
    <interfaces xmlns="http://asterfusion.com/ns/yang/asternos-interfaces">
      <interface>
        <name>Vlan300</name>
        <mac-scan-ips operation="delete"/>
      </interface>
    </interfaces>
  </top>
</config>

<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="urn:uuid:a93d63b2-8c95-4480-86c8-60a431e7d6f2">
  <ok/>
</rpc-reply>

Get VLAN mac scan via get-config.

<filter type="subtree">
  <top xmlns="http://asterfusion.com/ns/yang/asternos-interfaces">
    <interfaces>
      <interface>
        <name>Vlan300</name>
      </interface>
    </interfaces>
  </top>
</filter>

<?xml version="1.0" ?>
<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="urn:uuid:b4d1f8af-d9f1-4a19-9ecf-47df3cb91bbb">
  <data>
    <top>
      <interfaces xmlns="http://asterfusion.com/ns/yang/asternos-interfaces">
        <interface>
          <name>Vlan300</name>
          <admin-status>true</admin-status>
          <interface-mode>routed</interface-mode>
          <mac-scan-enabled>true</mac-scan-enabled>
          <ipv4 xmlns="http://asterfusion.com/ns/yang/asternos-ip">
            <dhcp-alloc>false</dhcp-alloc>
            <address>
              <ip-prefix>3.3.3.2/24</ip-prefix>
            </address>
          </ipv4>
          <ipv6 xmlns="http://asterfusion.com/ns/yang/asternos-ip">
            <router-advertisement/>
          </ipv6>
        </interface>
      </interfaces>
    </top>
  </data>
</rpc-reply>

Properties Descriptions

MAC Scan global configuration entry

Tree Diagram

module: asternos-mac-scan
  +--rw mac-scan
     +--rw enabled?             boolean
     +--rw period?              uint16
     +--rw remove-on-timeout?   boolean
     +--rw remote?              boolean
     +--rw interfaces
        +--ro interface* [name]
           +--ro name                if:interface-ref
           +--ro mac-scan-enabled?   boolean
           +--ro mac-scan-ips?       string

  augment /if:interfaces/if:interface:
    +--rw mac-scan-enabled?   boolean
    +--rw mac-scan-ips?       string

Table of Properties

Name	Required	Type/Range	Description
mac-scan	M		Path-only node, has no configurable value. MAC Scan global configuration entry.
enabled	O	”true" "false”	Enable MAC scan Default value: False
period	O	1..1000	Mac-scan period; range 1..1000 ms; default 10. Default value: 10
remove-on-timeout	O	”true" "false”	Enable the function to delete entries after no response from MAC scan. Default value: False
remote	O	”true" "false”	Enable MAC remote terminal detection Default value: False
interfaces	M		Path-only node, has no configurable value.
interface	RO		Path-only node, has no configurable value. Read-only VLAN interface MAC scan status and ip ranges.
name	RO	if:interface-ref	Vlan Interface name.
mac-scan-enabled	RO	”true" "false”	VLAN level MAC scan enable. Default value: False
mac-scan-ips	RO	string	mac-scan ip-ranges; supports comma-separated prefixes/ranges, e.g. ‘80.0.0.1-90.0.0.2,91.0.0.1/24-91.0.0.5/24,92.0.0.3/24,93.0.0.2’.