Isolationgroup-Netconf

Isolationgroup

Resources Summary

YANG Path	get/get-config	edit-config	rpc
/batch-add-isolation-group-members	—	—	Y
/batch-remove-isolation-group-members	—	—	Y
/isolation-groups/{id}	Y	merge, replace, create, delete	—

Examples

This chapter provides examples on how to use Netconf to manage Isolation Group configurations on AsterNOS devices.

Create Isolation Group

Request example to create isolation group via edit-config.

<config>
  <top>
    <vlans>
      <vlan>
        <vlanid>100</vlanid>
      </vlan>
    </vlans>
    <interfaces>
      <interface>
        <name>Ethernet1</name>
        <vlan-config>
          <vlan>
            <vlan-id>100</vlan-id>
            <tagging-mode>tagged</tagging-mode>
          </vlan>
        </vlan-config>
      </interface>
      <interface>
        <name>Ethernet2</name>
        <vlan-config>
          <vlan>
            <vlan-id>100</vlan-id>
            <tagging-mode>tagged</tagging-mode>
          </vlan>
        </vlan-config>
      </interface>
    </interfaces>
    <isolation-groups>
      <isolation-group>
        <id>1</id>
        <type>l2</type>
        <members>Ethernet1</members>
        <members>Ethernet2</members>
        <description>Test group 1</description>
      </isolation-group>
    </isolation-groups>
  </top>
</config>

Response example

<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="urn:uuid:40e28ae3-cb87-4e22-83c0-07d0dc69d41c">
  <ok/>
</rpc-reply>

Delete Isolation Group Memeber

Request example to delete isolation group member via edit-config.

<config>
  <top>
    <isolation-groups>
      <isolation-group>
        <id>1</id>
        <type>l2</type>
        <members operation="delete">Ethernet1</members>
        <members>Ethernet2</members>
        <description>Test group 1</description>
      </isolation-group>
    </isolation-groups>
  </top>
</config>

Response example

<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="urn:uuid:700825c2-3c4b-4022-9428-5a2945b31339">
  <ok/>
</rpc-reply>

Delete Isolation Group

Request example to delete isolation group via edit-config.

<config>
  <top>
    <isolation-groups>
      <isolation-group operation="delete">
      </isolation-group>
    </isolation-groups>
  </top>
</config>

Response example

<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="urn:uuid:700825c2-3c4b-4022-9428-5a2945b31339">
  <ok/>
</rpc-reply>

Get Isolation Group Information

Request example to get isolation group via get-config.

<filter type="subtree">
    <top>
        <isolation-groups>
            <isolation-group>
                <id>1</id>
            </isolation-group>
        </isolation-groups>
    </top>
</filter>

Response example

<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="urn:uuid:b1df98b0-f00a-42cd-a0af-17f6937f5a4b">
  <data>
    <top>
      <isolation-groups xmlns="http://asterfusion.com/ns/yang/asternos-isolation-group">
        <isolation-group>
          <id>1</id>
          <type>l2</type>
          <members>Ethernet1</members>
          <members>Ethernet2</members>
          <description>Test group 1</description>
        </isolation-group>
      </isolation-groups>
    </top>
  </data>
</rpc-reply>

Properties Descriptions

The isolation group feature of AsterNOS

Tree Diagram

module: asternos-isolation-group
  +--rw isolation-groups
     +--rw isolation-group* [id]
        +--rw id             uint32
        +--rw type?          enumeration
        +--rw members*       union
        +--rw description?   string

Table of Properties

Name	Required	Type/Range	Description
isolation-groups	M		Path-only node, has no configurable value. The isolation group feature of AsterNOS. For isolation group of type ‘l2’, only l2 traffic from ‘ports’ to ‘members’ is isolated. For isolation group of type ‘all’, all traffic from ‘ports’ to ‘members’ is isolated.
isolation-group	M		Path-only node, has no configurable value. The isolation group
id	O	1..128	The id of the isolation group.
type	O	”l2”
members	O	Ethernet name	The list of members in the isolation group.
description	O	string	The description of the isolation group.

Batch Add Isolation Group Members

Tree Diagram

module: asternos-isolation-group

  rpcs:
    +---x batch-add-isolation-group-members
       +---w input
          +---w isolation-group-id?   uint32
          +---w members*              union

Table of Properties

Name	Required	Type/Range	Description
batch-add-isolation-group-members	O
isolation-group-id	O	1..128
members	O	Ethernet name	The list of members to be added to the isolation group.

Batch Remove Isolation Group Members

Tree Diagram

module: asternos-isolation-group

  rpcs:
    +---x batch-remove-isolation-group-members
       +---w input
          +---w isolation-group-id?   uint32
          +---w members*              union

Table of Properties

Name	Required	Type/Range	Description
batch-remove-isolation-group-members	O
isolation-group-id	O	1..128
members	O	Ethernet name	The list of members to be removed from the isolation group.