SYNCE-Netconf

SYNCE

Resources Summary

YANG Path	get/get-config	edit-config	rpc
/syncE/{port}	Y	merge, replace, create, delete	—

Examples

This chapter provides examples on how to use Netconf to manage SyncE configurations on AsterNOS devices.

Get SyncE Status

Request example to get syncE status via get.

<filter type="subtree">
  <top>
      <syncE>
          <syncE>
          </syncE>
      </syncE>
  </top>
</filter>

Response example

<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="urn:uuid:2fa92bca-d4aa-4495-9933-26ff825d416c">
  <data>
    <top>
      <syncE xmlns="http://asterfusion.com/ns/yang/asternos-syncE">
        <syncE>
          <port>Ethernet1</port>
          <enabled>true</enabled>
          <mode>master</mode>
          <priority>1</priority>
          <selected>non-selected</selected>
        </syncE>
      </syncE>
    </top>
  </data>
</rpc-reply>

Get SyncE Configurations

Request example to get syncE status via get-config.

<filter type="subtree">
  <top>
      <syncE>
          <syncE>
          </syncE>
      </syncE>
  </top>
</filter>

Response example

<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="urn:uuid:5805b3f0-8c2a-4ca7-adbc-efdcc24483da">
  <data>
    <top>
      <syncE xmlns="http://asterfusion.com/ns/yang/asternos-syncE">
        <syncE>
          <port>Ethernet1</port>
          <enabled>true</enabled>
          <mode>master</mode>
          <priority>1</priority>
        </syncE>
      </syncE>
    </top>
  </data>
</rpc-reply>

Get SyncE Single Port Status

Request example to get syncE Single Port Status via get.

<filter type="subtree">
  <top>
      <syncE>
          <syncE>
              <port>Ethernet1</port>
          </syncE>
      </syncE>
  </top>
</filter>

Response example

<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="urn:uuid:5dfdb72c-5c17-4937-9555-7b5358f7fc99">
  <data>
    <top>
      <syncE xmlns="http://asterfusion.com/ns/yang/asternos-syncE">
        <syncE>
          <port>Ethernet1</port>
          <enabled>true</enabled>
          <mode>master</mode>
          <priority>1</priority>
          <selected>non-selected</selected>
        </syncE>
      </syncE>
    </top>
  </data>
</rpc-reply>

Create SyncE Port Configuration

Request example to create syncE for Port via edit-config.

<config><top>
  <syncE>
    <syncE operation="create">
      <port>Ethernet1</port>
      <enabled>true</enabled>
      <mode>master</mode>
      <priority>1</priority>
    </syncE>
  </syncE>
</top></config>

Response example

<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="urn:uuid:dec166d7-4ec2-4a6c-8f18-ef8d0d036507">
  <ok/>
</rpc-reply>

Modify SyncE Port Configuration

Request example to modify syncE for Port via edit-config.

<config><top>
  <syncE>
    <syncE operation="merge">
      <port>Ethernet1</port>
      <enabled>false</enabled>
      <mode>slave</mode>
      <priority>10</priority>
    </syncE>
  </syncE>
</top></config>

Response example

<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="urn:uuid:d9858b81-e7d6-4dbf-ac37-6f0b372cb499">
  <ok/>
</rpc-reply>

Delete SyncE Port Configuration

Request example to delete syncE for Port via edit-config.

<config><top>
  <syncE>
    <syncE operation="delete">
      <port>Ethernet1</port>
    </syncE>
  </syncE>
</top></config>

Response example

<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="urn:uuid:0ae59213-4833-44d3-bb80-c6957eb2d482">
  <ok/>
</rpc-reply>

Properties Descriptions

Synce

Tree Diagram

module: asternos-syncE
  +--rw syncE
     +--rw syncE* [port]
        +--rw port        if:interface-ref
        +--rw enabled?    boolean
        +--rw mode?       syncE-mode-enumeration
        +--rw priority?   uint8
        +--ro selected?   string

Table of Properties

Name	Required	Type/Range	Description
syncE	M		Path-only node, has no configurable value.
syncE	M		Path-only node, has no configurable value. List of syncE data sets of the port.
port	O	if:interface-ref	Reference to the configured underlying interface that is used by this syncE port (see RFC 8343).
enabled	O	”true" "false”	Enabled or disabled syncE functions for port. Default value: False
mode	O	”master" "slave”	SyncE mode for port
priority	O	0..255	SyncE priority for port
selected	RO	string	Port Selected status