BFD-Netconf

此内容尚不支持你的语言。

BFD

Resources Summary

YANG Path	get/get-config	edit-config	rpc
/bfd	Y	merge, replace, create, delete	—
/bfd/ldp-lsps/{peer-ip}/{nexthop}/{vrf-name}	Y	merge, replace, create, delete	—
/bfd/profiles/{profile-name}	Y	merge, replace, create, delete	—
/bfd/sessions/{dest-addr}/{vrf-name}/{multihop}	Y	merge, replace, create, delete	—
/clear-bfd-counters	—	—	Y
/show-bfd-brief	—	—	Y
/show-bfd-counters	—	—	Y
/show-bfd-distributed	—	—	Y
/show-bfd-static-route	—	—	Y

Examples

Get All Existing Bfd Configuration On Device

Request example via rpc get-config

<filter type="subtree">
  <top>
    <bfd>
    </bfd>
  </filter>

Reply example via rpc get-config

<data xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
  <top>
    <bfd xmlns="http://asterfusion.com/ns/yang/asternos-bfd">
      <sessions>
        <session>
          <dest-addr>100.1.1.1</dest-addr>
          <vrf-name>default</vrf-name>
          <multihop>false</multihop>
          <source-addr>100.1.1.2</source-addr>
          <interface>Ethernet1</interface>
          <detect-multiplier>100</detect-multiplier>
          <receive-interval>100</receive-interval>
          <transmit-interval>100</transmit-interval>
          <echo-mode>true</echo-mode>
          <echo-interval>100</echo-interval>
          <shutdown>true</shutdown>
          <passive-mode>true</passive-mode>
          <echo-receive-interval>100</echo-receive-interval>
          <echo-transmit-interval>100</echo-transmit-interval>
          <profile-name>test_profile</profile-name>
        </session>
        <session>
          <dest-addr>200.1.1.1</dest-addr>
          <vrf-name>default</vrf-name>
          <multihop>true</multihop>
          <source-addr>200.1.1.2</source-addr>
          <interface>Ethernet2</interface>
          <detect-multiplier>200</detect-multiplier>
          <receive-interval>200</receive-interval>
          <transmit-interval>200</transmit-interval>
          <minimum-ttl>200</minimum-ttl>
          <shutdown>true</shutdown>
          <passive-mode>false</passive-mode>
          <profile-name>test_profile</profile-name>
        </session>
      </sessions>
      <profiles>
        <profile>
          <profile-name>test_profile</profile-name>
          <detect-multiplier>150</detect-multiplier>
          <receive-interval>150</receive-interval>
          <transmit-interval>150</transmit-interval>
          <minimum-ttl>150</minimum-ttl>
          <echo-mode>false</echo-mode>
          <echo-interval>150</echo-interval>
          <shutdown>true</shutdown>
          <passive-mode>false</passive-mode>
          <echo-receive-interval>150</echo-receive-interval>
          <echo-transmit-interval>150</echo-transmit-interval>
        </profile>
      </profiles>
    </bfd>
  </data>

Get Single Bfd configuration on Device

Request example via rpc get-config

<filter type="subtree">
  <top>
    <bfd>
      <sessions>
        <session>
          <dest-addr>100.1.1.1</dest-addr>
          <vrf-name>default</vrf-name>
          <multihop>false</multihop>
        </session>
      </sessions>
    </bfd>
  </filter>

Reply example via rpc get-config

<data xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
  <top>
    <bfd xmlns="http://asterfusion.com/ns/yang/asternos-bfd">
      <sessions>
        <session>
          <dest-addr>100.1.1.1</dest-addr>
          <vrf-name>default</vrf-name>
          <multihop>false</multihop>
          <source-addr>100.1.1.2</source-addr>
          <interface>Ethernet1</interface>
          <detect-multiplier>100</detect-multiplier>
          <receive-interval>100</receive-interval>
          <transmit-interval>100</transmit-interval>
          <echo-mode>true</echo-mode>
          <echo-interval>100</echo-interval>
          <shutdown>true</shutdown>
          <passive-mode>true</passive-mode>
          <echo-receive-interval>100</echo-receive-interval>
          <echo-transmit-interval>100</echo-transmit-interval>
          <profile-name>test_profile</profile-name>
        </session>
      </sessions>
    </bfd>
  </data>

Get Bfd Profile configuration on Device

Request example via rpc get-config

<filter type="subtree">
  <top>
    <bfd>
      <profiles>
        <profile>
          <profile-name>test_profile</profile-name>
        </profile>
      </profiles>
    </bfd>
  </filter>

Reply example via rpc get-config

<data xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
  <top>
    <bfd xmlns="http://asterfusion.com/ns/yang/asternos-bfd">
      <profiles>
        <profile>
          <profile-name>test_profile</profile-name>
          <detect-multiplier>150</detect-multiplier>
          <receive-interval>150</receive-interval>
          <transmit-interval>150</transmit-interval>
          <minimum-ttl>150</minimum-ttl>
          <echo-mode>false</echo-mode>
          <echo-interval>150</echo-interval>
          <shutdown>true</shutdown>
          <passive-mode>false</passive-mode>
          <echo-receive-interval>150</echo-receive-interval>
          <echo-transmit-interval>150</echo-transmit-interval>
        </profile>
      </profiles>
    </bfd>
  </data>

Show Bfd Counters configuration on Device

Request example to get bfd counters via rpc

<show-bfd-counters>
  <dest-addr>1.1.1.1</dest-addr>
</show-bfd-counters>

Request example to get bfd counters for peers via rpc

<show-bfd-counters>
  <peers/>
</show-bfd-counters>

Reply example

<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="urn:uuid:48d09191-a90b-4b03-976d-2bd961cfb3e9">
  <data xmlns="http://asterfusion.com/ns/yang/asternos-bfd">
    <counters>
      <multihop>false</multihop>
      <peer>1.1.1.1</peer>
      <control-packet-input>0</control-packet-input>
      <control-packet-output>357858</control-packet-output>
      <echo-packet-input>0</echo-packet-input>
      <echo-packet-output>0</echo-packet-output>
      <session-up>0</session-up>
      <session-down>0</session-down>
      <zebra-notifications>0</zebra-notifications>
    </counters>
  </data>
</rpc-reply>

Get Bfd peer on Device

Request example to get bfd peer via rpc

<show-bfd-brief>
  <peers/>
</show-bfd-brief>

Reply example

<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="urn:uuid:035bde6e-c6df-4b8b-908c-296e8251bc56">
  <data xmlns="http://asterfusion.com/ns/yang/asternos-bfd">
    <brief>
      <multihop>true</multihop>
      <peer>1.1.1.1</peer>
      <local>2.2.2.2</local>
      <id>2248455741</id>
      <remote-id>0</remote-id>
      <passive-mode>false</passive-mode>
      <minimum-ttl>254</minimum-ttl>
      <status>down</status>
      <downtime>48459</downtime>
      <diagnostic>ok</diagnostic>
      <remote-diagnostic>ok</remote-diagnostic>
      <type>configured</type>
      <receive-interval>400</receive-interval>
      <transmit-interval>400</transmit-interval>
      <echo-receive-interval>50</echo-receive-interval>
      <echo-transmit-interval>0</echo-transmit-interval>
      <detect-multiplier>5</detect-multiplier>
      <remote-receive-interval>1000</remote-receive-interval>
      <remote-transmit-interval>1000</remote-transmit-interval>
      <remote-echo-receive-interval>0</remote-echo-receive-interval>
      <remote-detect-multiplier>5</remote-detect-multiplier>
      <rtt-min>0</rtt-min>
      <rtt-avg>0</rtt-avg>
      <rtt-max>0</rtt-max>
    </brief>
    <brief>
      <multihop>false</multihop>
      <peer>1.1.1.1</peer>
      <id>3352271232</id>
      <remote-id>0</remote-id>
      <passive-mode>false</passive-mode>
      <status>down</status>
      <downtime>318170</downtime>
      <diagnostic>ok</diagnostic>
      <remote-diagnostic>ok</remote-diagnostic>
      <type>configured</type>
      <receive-interval>400</receive-interval>
      <transmit-interval>400</transmit-interval>
      <echo-receive-interval>50</echo-receive-interval>
      <echo-transmit-interval>0</echo-transmit-interval>
      <detect-multiplier>5</detect-multiplier>
      <remote-receive-interval>1000</remote-receive-interval>
      <remote-transmit-interval>1000</remote-transmit-interval>
      <remote-echo-receive-interval>0</remote-echo-receive-interval>
      <remote-detect-multiplier>5</remote-detect-multiplier>
      <rtt-min>0</rtt-min>
      <rtt-avg>0</rtt-avg>
      <rtt-max>0</rtt-max>
    </brief>
    <brief>
      <multihop>false</multihop>
      <peer>3.3.3.3</peer>
      <id>2011189365</id>
      <remote-id>0</remote-id>
      <passive-mode>false</passive-mode>
      <status>down</status>
      <downtime>64791</downtime>
      <diagnostic>ok</diagnostic>
      <remote-diagnostic>ok</remote-diagnostic>
      <type>configured</type>
      <receive-interval>400</receive-interval>
      <transmit-interval>400</transmit-interval>
      <echo-receive-interval>50</echo-receive-interval>
      <echo-transmit-interval>0</echo-transmit-interval>
      <detect-multiplier>5</detect-multiplier>
      <remote-receive-interval>1000</remote-receive-interval>
      <remote-transmit-interval>1000</remote-transmit-interval>
      <remote-echo-receive-interval>0</remote-echo-receive-interval>
      <remote-detect-multiplier>5</remote-detect-multiplier>
      <rtt-min>0</rtt-min>
      <rtt-avg>0</rtt-avg>
      <rtt-max>0</rtt-max>
    </brief>
  </data>
</rpc-reply>

Request example to get bfd peer via rpc

<show-bfd-brief>
  <dest-addr>1.1.1.1</dest-addr>
  <multihop>true</multihop>
</show-bfd-brief>

Reply example

<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="urn:uuid:48d09191-a90b-4b03-976d-2bd961cfb3e9">
  <data xmlns="http://asterfusion.com/ns/yang/asternos-bfd">
    <brief>
      <multihop>true</multihop>
      <peer>1.1.1.1</peer>
      <local>2.2.2.2</local>
      <id>2248455741</id>
      <remote-id>0</remote-id>
      <passive-mode>false</passive-mode>
      <minimum-ttl>254</minimum-ttl>
      <status>down</status>
      <downtime>48459</downtime>
      <diagnostic>ok</diagnostic>
      <remote-diagnostic>ok</remote-diagnostic>
      <type>configured</type>
      <receive-interval>400</receive-interval>
      <transmit-interval>400</transmit-interval>
      <echo-receive-interval>50</echo-receive-interval>
      <echo-transmit-interval>0</echo-transmit-interval>
      <detect-multiplier>5</detect-multiplier>
      <remote-receive-interval>1000</remote-receive-interval>
      <remote-transmit-interval>1000</remote-transmit-interval>
      <remote-echo-receive-interval>0</remote-echo-receive-interval>
      <remote-detect-multiplier>5</remote-detect-multiplier>
      <rtt-min>0</rtt-min>
      <rtt-avg>0</rtt-avg>
      <rtt-max>0</rtt-max>
    </brief>
  </data>
</rpc-reply>

Clear bfd Counters

Clear all bfd counters on device

<clear-bfd-counters>
  <peers/>
</clear-bfd-counters>

Clear single bfd counters on device

<clear-bfd-counters>
  <dest-addr>1.1.1.1</dest-addr>
  <interface>Ethernet1</interface>
</clear-bfd-counters>

Create bfd

Create singlehop bfd

<config><top>
  <bfd>
    <sessions operation="create">
      <session>
        <dest-addr>1.1.1.1</dest-addr>
        <vrf-name>default</vrf-name>
        <multihop>false</multihop>
        <source-addr>100.1.1.2</source-addr>
        <interface>Ethernet1</interface>
        <detect-multiplier>100</detect-multiplier>
        <receive-interval>100</receive-interval>
        <transmit-interval>100</transmit-interval>
        <echo-mode>true</echo-mode>
        <echo-interval>100</echo-interval>
        <shutdown>true</shutdown>
        <passive-mode>true</passive-mode>
        <echo-receive-interval>100</echo-receive-interval>
        <echo-transmit-interval>100</echo-transmit-interval>
        <profile-name>test_profile</profile-name>
      </session>
    </sessions>
  </bfd>
</top></config>

Create multihop bfd

<config><top>
  <bfd>
    <sessions>
      <session operation="merge">
        <dest-addr>200.1.1.1</dest-addr>
        <vrf-name>default</vrf-name>
        <multihop>true</multihop>
        <minimum-ttl>100</minimum-ttl>
      </session>
    </sessions>
  </bfd>
</top></config>

Delete bfd

Delete all bfd

<config><top>
  <bfd operation="delete">
  </bfd>
</top></config>

Delete single bfd

<config><top>
  <bfd>
    <sessions operation="create">
      <session>
        <dest-addr>1.1.1.1</dest-addr>
        <vrf-name>default</vrf-name>
        <multihop>false</multihop>
        <echo-interval>10</echo-interval>
      </session>
    </sessions>
  </bfd>
</top></config>

Create/Update Bfd LDP LSP Configuration

Request example via rpc edit-config (create LDP LSP BFD session)

<config>
  <top>
    <bfd xmlns="http://asterfusion.com/ns/yang/asternos-bfd">
      <ldp-lsps>
        <ldp-lsp operation="create">
          <peer-ip>10.1.1.1</peer-ip>
          <nexthop>10.1.1.2</nexthop>
          <vrf-name>default</vrf-name>
          <interface>Ethernet100</interface>
          <detect-multiplier>50</detect-multiplier>
          <receive-interval>300</receive-interval>
          <transmit-interval>300</transmit-interval>
          <shutdown>false</shutdown>
          <passive-mode>false</passive-mode>
          <local-discriminator>10</local-discriminator>
          <remote-discriminator>10</remote-discriminator>
        </ldp-lsp>
      </ldp-lsps>
    </bfd>
  </top>
</config>

Delete Bfd LDP LSP Configuration

Request example via rpc edit-config (delete LDP LSP BFD session)

<config>
  <top>
    <bfd xmlns="http://asterfusion.com/ns/yang/asternos-bfd">
      <ldp-lsps>
        <ldp-lsp operation="delete">
          <peer-ip>10.1.1.1</peer-ip>
          <nexthop>10.1.1.2</nexthop>
          <vrf-name>default</vrf-name>
        </ldp-lsp>
      </ldp-lsps>
    </bfd>
  </top>
</config>

Get Bfd LDP LSP Configuration

Request example via rpc get-config (get all LDP LSP BFD sessions)

<filter type="subtree">
  <top>
    <bfd>
      <ldp-lsps/>
    </bfd>
  </filter>

Reply example via rpc get-config (LDP LSP BFD sessions)

<data xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
  <top>
    <bfd xmlns="http://asterfusion.com/ns/yang/asternos-bfd">
      <ldp-lsps>
        <ldp-lsp>
          <peer-ip>10.1.1.1</peer-ip>
          <nexthop>10.1.1.2</nexthop>
          <vrf-name>default</vrf-name>
          <interface>Ethernet100</interface>
          <detect-multiplier>50</detect-multiplier>
          <receive-interval>300</receive-interval>
          <transmit-interval>300</transmit-interval>
          <shutdown>false</shutdown>
          <passive-mode>false</passive-mode>
          <local-discriminator>10</local-discriminator>
          <remote-discriminator>10</remote-discriminator>
        </ldp-lsp>
      </ldp-lsps>
    </bfd>
  </top>
</data>

Properties Descriptions

Bfd

Tree Diagram

/workspaces/as-mgmt-doc/doc/resource/yang/asternos-bfd.yang:18: warning: imported module "asternos-common" not used
/workspaces/as-mgmt-doc/doc/resource/yang/asternos-bfd.yang:419: warning: default value for a key leaf is ignored
module: asternos-bfd
  +--rw bfd
     +--rw sessions
     |  +--rw session* [dest-addr vrf-name multihop]
     |     +--rw dest-addr                 inet:ip-address-no-zone
     |     +--rw vrf-name                  vrf:vrf-ref
     |     +--rw multihop                  boolean
     |     +--rw source-addr               inet:ip-address-no-zone
     |     +--rw interface?                if:interface-ref
     |     +--rw detect-multiplier?        uint16
     |     +--rw receive-interval?         uint16
     |     +--rw transmit-interval?        uint16
     |     +--rw shutdown?                 boolean
     |     +--rw passive-mode?             boolean
     |     +--rw minimum-ttl?              uint8
     |     +--rw echo-mode?                boolean
     |     +--rw echo-interval?            uint16
     |     +--rw echo-receive-interval?    union
     |     +--rw echo-transmit-interval?   uint16
     |     +--rw profile-name?             string
     +--rw ldp-lsps
     |  +--rw ldp-lsp* [peer-ip nexthop vrf-name]
     |     +--rw peer-ip                 inet:ip-address-no-zone
     |     +--rw nexthop                 inet:ip-address-no-zone
     |     +--rw vrf-name                vrf:vrf-ref
     |     +--rw interface?              if:interface-ref
     |     +--rw local-discriminator?    discriminator
     |     +--rw remote-discriminator?   discriminator
     |     +--rw detect-multiplier?      uint16
     |     +--rw receive-interval?       uint16
     |     +--rw transmit-interval?      uint16
     |     +--rw shutdown?               boolean
     |     +--rw passive-mode?           boolean
     +--rw profiles
        +--rw profile* [profile-name]
           +--rw profile-name              string
           +--rw minimum-ttl?              uint8
           +--rw detect-multiplier?        uint16
           +--rw receive-interval?         uint16
           +--rw transmit-interval?        uint16
           +--rw shutdown?                 boolean
           +--rw passive-mode?             boolean
           +--rw echo-mode?                boolean
           +--rw echo-interval?            uint16
           +--rw echo-receive-interval?    union
           +--rw echo-transmit-interval?   uint16

Table of Properties

Name	Required	Type/Range	Description
bfd	M		Path-only node, has no configurable value.
sessions	M		Path-only node, has no configurable value.
session	M		Path-only node, has no configurable value.
dest-addr	O	inet:ip-address-no-zone	BFD remote IP address.
vrf-name	O	vrf:vrf-ref	Name of VRF instance. default is ‘default’.
multihop	M	”true" "false”	When ‘multihop’ is ‘true’, ‘source-addr’ must be configured.
source-addr	M	inet:ip-address-no-zone	BFD local IP address. When ‘multihop’ is ‘true’, ‘source-addr’ must be configured.
interface	O	if:interface-ref	Name of interface. interface is prohibited when using multihop
detect-multiplier	O	2..255	peer detection multiplier Default value: 5
receive-interval	O	1..60000	Minimum desired control packet receive interval Default value: 400
transmit-interval	O	1..60000	Minimum desired control packet transmit interval Default value: 400
shutdown	O	”true" "false”	BFD state of profile or session
passive-mode	O	”true" "false”	Don’t attempt to start session establishment. Default value: False
minimum-ttl	O	1..254	Minimum expected TTL on received packets. Minimum TTL is only available for multi hop sessions. Default value: 254
echo-mode	O	”true" "false”	Use echo packets to detect failures. Echo mode is only available for single hop sessions. Default value: False
echo-interval	O	10..60000	Configure peer echo intervals. Echo is only available for single hop sessions.
echo-receive-interval	O	10..60000 0	Minimum required echo packet receive interval Echo is only available for single hop sessions. Default value: 50
echo-transmit-interval	O	10..60000	Minimum desired echo packet transmission interval, this parameter only takes effect when configuring echo mode Echo mode is only available for single hop sessions. Default value: 50
profile-name	O	string (length 1..64)	BFD profile name
ldp-lsps	M		Path-only node, has no configurable value.
ldp-lsp	M		Path-only node, has no configurable value. Each LDP LSP BFD session is uniquely identified by the LSP peer IP, the next-hop IP, and the VRF instance.
peer-ip	O	inet:ip-address-no-zone	IPv4 address of the remote LDP peer (LSP endpoint).
nexthop	O	inet:ip-address-no-zone	IPv4 address of the next-hop toward the LDP peer.
vrf-name	O	vrf:vrf-ref	VRF instance name. The LDP LSP is bound to this VRF. Default value: default
interface	O	if:interface-ref	Name of interface. interface is prohibited when using multihop
local-discriminator	O	1..4294967295	Local BFD session identification
remote-discriminator	O	1..4294967295	Remote BFD session identification
detect-multiplier	O	2..255	peer detection multiplier Default value: 5
receive-interval	O	1..60000	Minimum desired control packet receive interval Default value: 400
transmit-interval	O	1..60000	Minimum desired control packet transmit interval Default value: 400
shutdown	O	”true" "false”	BFD state of profile or session
passive-mode	O	”true" "false”	Don’t attempt to start session establishment. Default value: False
profiles	M		Path-only node, has no configurable value.
profile	M		Path-only node, has no configurable value.
profile-name	O	string (length 1..64)	BFD profile name
minimum-ttl	O	1..254	Minimum expected TTL on received packets. Minimum TTL is only available for multi hop sessions. Default value: 254
detect-multiplier	O	2..255	peer detection multiplier Default value: 5
receive-interval	O	1..60000	Minimum desired control packet receive interval Default value: 400
transmit-interval	O	1..60000	Minimum desired control packet transmit interval Default value: 400
shutdown	O	”true" "false”	BFD state of profile or session
passive-mode	O	”true" "false”	Don’t attempt to start session establishment. Default value: False
echo-mode	O	”true" "false”	Use echo packets to detect failures. Default value: False
echo-interval	O	10..60000	Desired echo packet transmission interval (in milliseconds). Default value: 50
echo-receive-interval	O	0 10..60000	Minimum required echo packet receive interval. 0 disables echo reception. Default value: 50
echo-transmit-interval	O	10..60000	Minimum desired echo packet transmission interval. Default value: 50

Ldp Lsps

Tree Diagram

/workspaces/as-mgmt-doc/doc/resource/yang/asternos-bfd.yang:18: warning: imported module "asternos-common" not used
/workspaces/as-mgmt-doc/doc/resource/yang/asternos-bfd.yang:419: warning: default value for a key leaf is ignored
module: asternos-bfd
  +--rw bfd
     +--rw ldp-lsps
        +--rw ldp-lsp* [peer-ip nexthop vrf-name]
           +--rw peer-ip                 inet:ip-address-no-zone
           +--rw nexthop                 inet:ip-address-no-zone
           +--rw vrf-name                vrf:vrf-ref
           +--rw interface?              if:interface-ref
           +--rw local-discriminator?    discriminator
           +--rw remote-discriminator?   discriminator
           +--rw detect-multiplier?      uint16
           +--rw receive-interval?       uint16
           +--rw transmit-interval?      uint16
           +--rw shutdown?               boolean
           +--rw passive-mode?           boolean

Table of Properties

Name	Required	Type/Range	Description
ldp-lsps	M		Path-only node, has no configurable value.
ldp-lsp	M		Path-only node, has no configurable value. Each LDP LSP BFD session is uniquely identified by the LSP peer IP, the next-hop IP, and the VRF instance.
peer-ip	O	inet:ip-address-no-zone	IPv4 address of the remote LDP peer (LSP endpoint).
nexthop	O	inet:ip-address-no-zone	IPv4 address of the next-hop toward the LDP peer.
vrf-name	O	vrf:vrf-ref	VRF instance name. The LDP LSP is bound to this VRF. Default value: default
interface	O	if:interface-ref	Name of interface. interface is prohibited when using multihop
local-discriminator	O	1..4294967295	Local BFD session identification
remote-discriminator	O	1..4294967295	Remote BFD session identification
detect-multiplier	O	2..255	peer detection multiplier Default value: 5
receive-interval	O	1..60000	Minimum desired control packet receive interval Default value: 400
transmit-interval	O	1..60000	Minimum desired control packet transmit interval Default value: 400
shutdown	O	”true" "false”	BFD state of profile or session
passive-mode	O	”true" "false”	Don’t attempt to start session establishment. Default value: False

Profiles

Tree Diagram

/workspaces/as-mgmt-doc/doc/resource/yang/asternos-bfd.yang:18: warning: imported module "asternos-common" not used
/workspaces/as-mgmt-doc/doc/resource/yang/asternos-bfd.yang:419: warning: default value for a key leaf is ignored
module: asternos-bfd
  +--rw bfd
     +--rw profiles
        +--rw profile* [profile-name]
           +--rw profile-name              string
           +--rw minimum-ttl?              uint8
           +--rw detect-multiplier?        uint16
           +--rw receive-interval?         uint16
           +--rw transmit-interval?        uint16
           +--rw shutdown?                 boolean
           +--rw passive-mode?             boolean
           +--rw echo-mode?                boolean
           +--rw echo-interval?            uint16
           +--rw echo-receive-interval?    union
           +--rw echo-transmit-interval?   uint16

Table of Properties

Name	Required	Type/Range	Description
profiles	M		Path-only node, has no configurable value.
profile	M		Path-only node, has no configurable value.
profile-name	O	string (length 1..64)	BFD profile name
minimum-ttl	O	1..254	Minimum expected TTL on received packets. Minimum TTL is only available for multi hop sessions. Default value: 254
detect-multiplier	O	2..255	peer detection multiplier Default value: 5
receive-interval	O	1..60000	Minimum desired control packet receive interval Default value: 400
transmit-interval	O	1..60000	Minimum desired control packet transmit interval Default value: 400
shutdown	O	”true" "false”	BFD state of profile or session
passive-mode	O	”true" "false”	Don’t attempt to start session establishment. Default value: False
echo-mode	O	”true" "false”	Use echo packets to detect failures. Default value: False
echo-interval	O	10..60000	Desired echo packet transmission interval (in milliseconds). Default value: 50
echo-receive-interval	O	0 10..60000	Minimum required echo packet receive interval. 0 disables echo reception. Default value: 50
echo-transmit-interval	O	10..60000	Minimum desired echo packet transmission interval. Default value: 50

Sessions

Tree Diagram

/workspaces/as-mgmt-doc/doc/resource/yang/asternos-bfd.yang:18: warning: imported module "asternos-common" not used
/workspaces/as-mgmt-doc/doc/resource/yang/asternos-bfd.yang:419: warning: default value for a key leaf is ignored
module: asternos-bfd
  +--rw bfd
     +--rw sessions
        +--rw session* [dest-addr vrf-name multihop]
           +--rw dest-addr                 inet:ip-address-no-zone
           +--rw vrf-name                  vrf:vrf-ref
           +--rw multihop                  boolean
           +--rw source-addr               inet:ip-address-no-zone
           +--rw interface?                if:interface-ref
           +--rw detect-multiplier?        uint16
           +--rw receive-interval?         uint16
           +--rw transmit-interval?        uint16
           +--rw shutdown?                 boolean
           +--rw passive-mode?             boolean
           +--rw minimum-ttl?              uint8
           +--rw echo-mode?                boolean
           +--rw echo-interval?            uint16
           +--rw echo-receive-interval?    union
           +--rw echo-transmit-interval?   uint16
           +--rw profile-name?             string

Table of Properties

Name	Required	Type/Range	Description
sessions	M		Path-only node, has no configurable value.
session	M		Path-only node, has no configurable value.
dest-addr	O	inet:ip-address-no-zone	BFD remote IP address.
vrf-name	O	vrf:vrf-ref	Name of VRF instance. default is ‘default’.
multihop	M	”true" "false”	When ‘multihop’ is ‘true’, ‘source-addr’ must be configured.
source-addr	M	inet:ip-address-no-zone	BFD local IP address. When ‘multihop’ is ‘true’, ‘source-addr’ must be configured.
interface	O	if:interface-ref	Name of interface. interface is prohibited when using multihop
detect-multiplier	O	2..255	peer detection multiplier Default value: 5
receive-interval	O	1..60000	Minimum desired control packet receive interval Default value: 400
transmit-interval	O	1..60000	Minimum desired control packet transmit interval Default value: 400
shutdown	O	”true" "false”	BFD state of profile or session
passive-mode	O	”true" "false”	Don’t attempt to start session establishment. Default value: False
minimum-ttl	O	1..254	Minimum expected TTL on received packets. Minimum TTL is only available for multi hop sessions. Default value: 254
echo-mode	O	”true" "false”	Use echo packets to detect failures. Echo mode is only available for single hop sessions. Default value: False
echo-interval	O	10..60000	Configure peer echo intervals. Echo is only available for single hop sessions.
echo-receive-interval	O	10..60000 0	Minimum required echo packet receive interval Echo is only available for single hop sessions. Default value: 50
echo-transmit-interval	O	10..60000	Minimum desired echo packet transmission interval, this parameter only takes effect when configuring echo mode Echo mode is only available for single hop sessions. Default value: 50
profile-name	O	string (length 1..64)	BFD profile name

Clear Bfd Counters

Tree Diagram

/workspaces/as-mgmt-doc/doc/resource/yang/asternos-bfd.yang:18: warning: imported module "asternos-common" not used
/workspaces/as-mgmt-doc/doc/resource/yang/asternos-bfd.yang:419: warning: default value for a key leaf is ignored
module: asternos-bfd

  rpcs:
    +---x clear-bfd-counters
       +---w input
          +---w vrf-name?            vrf:vrf-ref
          +---w (session)?
             +--:(peer)
             |  +---w dest-addr      inet:ip-address-no-zone
             |  +---w source-addr?   inet:ip-address-no-zone
             |  +---w multihop?      boolean
             |  +---w interface?     if:interface-ref
             +--:(peers)
                +---w peers?         empty

Table of Properties

Name	Required	Type/Range	Description
clear-bfd-counters	O
vrf-name	O	vrf:vrf-ref	Name of VRF instance. Default value: default
dest-addr	M	inet:ip-address-no-zone	BFD remote IP address.
source-addr	O	inet:ip-address-no-zone	BFD local IP address.
multihop	O	”true" "false”	BFD multihop
interface	O	if:interface-ref	Name of interface.
peers	O	empty

Show Bfd Brief

Tree Diagram

/workspaces/as-mgmt-doc/doc/resource/yang/asternos-bfd.yang:18: warning: imported module "asternos-common" not used
/workspaces/as-mgmt-doc/doc/resource/yang/asternos-bfd.yang:419: warning: default value for a key leaf is ignored
module: asternos-bfd

  rpcs:
    +---x show-bfd-brief
       +---w input
       |  +---w vrf-name?            vrf:vrf-ref
       |  +---w (session)?
       |     +--:(peer)
       |     |  +---w dest-addr      inet:ip-address-no-zone
       |     |  +---w source-addr?   inet:ip-address-no-zone
       |     |  +---w multihop?      boolean
       |     |  +---w interface?     if:interface-ref
       |     +--:(peers)
       |        +---w peers?         empty
       +--ro output
          +--ro data
             +--ro brief* []
                +--ro multihop?                       boolean
                +--ro peer?                           inet:ip-address-no-zone
                +--ro local?                          inet:ip-address-no-zone
                +--ro vrf-name?                       vrf:vrf-ref
                +--ro id?                             uint32
                +--ro remote-id?                      uint32
                +--ro passive-mode?                   boolean
                +--ro minimum-ttl?                    uint8
                +--ro status?                         string
                +--ro downtime?                       uint64
                +--ro diagnostic?                     string
                +--ro remote-diagnostic?              string
                +--ro type?                           string
                +--ro receive-interval?               uint16
                +--ro transmit-interval?              uint16
                +--ro echo-receive-interval?          uint16
                +--ro echo-transmit-interval?         uint16
                +--ro detect-multiplier?              uint16
                +--ro remote-receive-interval?        uint16
                +--ro remote-transmit-interval?       uint16
                +--ro remote-echo-receive-interval?   uint16
                +--ro remote-detect-multiplier?       uint16
                +--ro rtt-min?                        uint32
                +--ro rtt-avg?                        uint32
                +--ro rtt-max?                        uint32

Table of Properties

Name	Required	Type/Range	Description
show-bfd-brief	O
vrf-name	O	vrf:vrf-ref	Name of VRF instance. Default value: default
dest-addr	M	inet:ip-address-no-zone	BFD remote IP address.
source-addr	O	inet:ip-address-no-zone	BFD local IP address.
multihop	O	”true" "false”	BFD multihop
interface	O	if:interface-ref	Name of interface.
peers	O	empty
data	M		Path-only node, has no configurable value. A hierarchy of BFD brief information.
brief	M		Path-only node, has no configurable value.
multihop	O	”true" "false”	Indicates whether the BFD session is multihop.
peer	O	inet:ip-address-no-zone	BFD remote IP address.
local	O	inet:ip-address-no-zone	BFD local IP address.
vrf-name	O	vrf:vrf-ref	Name of VRF instance.
id	O	integer	local bfd discriminator number.
remote-id	O	integer	remote bfd discriminator number.
passive-mode	O	”true" "false”	The operating mode of BFD is passive mode.
minimum-ttl	O	integer	Minimum expected TTL on received packets.
status	O	string	BFD session status.
downtime	O	integer	BFD session downtime.
diagnostic	O	string	BFD session diagnostic.
remote-diagnostic	O	string	BFD session remote diagnostic.
type	O	string	BFD session type.
receive-interval	O	integer	Minimum desired control packet receive interval.
transmit-interval	O	integer	Minimum desired control packet transmit interval.
echo-receive-interval	O	integer	Minimum required echo packet receive interval.
echo-transmit-interval	O	integer	Minimum desired echo packet transmission interval, this parameter only takes effect when configuring echo mode.
detect-multiplier	O	integer	peer detection multiplier.
remote-receive-interval	O	integer	Minimum required control packet receive interval.
remote-transmit-interval	O	integer	Minimum desired control packet transmit interval.
remote-echo-receive-interval	O	integer	Minimum required echo packet receive interval.
remote-detect-multiplier	O	integer	peer detection multiplier.
rtt-min	O	integer	Minimum round-trip time.
rtt-avg	O	integer	Average round-trip time.
rtt-max	O	integer	Maximum round-trip time.

Show Bfd Counters

Tree Diagram

/workspaces/as-mgmt-doc/doc/resource/yang/asternos-bfd.yang:18: warning: imported module "asternos-common" not used
/workspaces/as-mgmt-doc/doc/resource/yang/asternos-bfd.yang:419: warning: default value for a key leaf is ignored
module: asternos-bfd

  rpcs:
    +---x show-bfd-counters
       +---w input
       |  +---w vrf-name?            vrf:vrf-ref
       |  +---w (session)?
       |     +--:(peer)
       |     |  +---w dest-addr      inet:ip-address-no-zone
       |     |  +---w source-addr?   inet:ip-address-no-zone
       |     |  +---w multihop?      boolean
       |     |  +---w interface?     if:interface-ref
       |     +--:(peers)
       |        +---w peers?         empty
       +--ro output
          +--ro data
             +--ro counters* []
                +--ro multihop?                boolean
                +--ro peer?                    inet:ip-address-no-zone
                +--ro local?                   inet:ip-address-no-zone
                +--ro vrf-name?                vrf:vrf-ref
                +--ro control-packet-input?    uint64
                +--ro control-packet-output?   uint64
                +--ro echo-packet-input?       uint64
                +--ro echo-packet-output?      uint64
                +--ro session-up?              uint64
                +--ro session-down?            uint64
                +--ro zebra-notifications?     uint64

Table of Properties

Name	Required	Type/Range	Description
show-bfd-counters	O
vrf-name	O	vrf:vrf-ref	Name of VRF instance. Default value: default
dest-addr	M	inet:ip-address-no-zone	BFD remote IP address.
source-addr	O	inet:ip-address-no-zone	BFD local IP address.
multihop	O	”true" "false”	BFD multihop
interface	O	if:interface-ref	Name of interface.
peers	O	empty
data	M		Path-only node, has no configurable value. A hierarchy of BFD counters information
counters	M		Path-only node, has no configurable value.
multihop	O	”true" "false”	Indicates the session is multi hop or not
peer	O	inet:ip-address-no-zone	BFD remote IP address.
local	O	inet:ip-address-no-zone	BFD local IP address. When’multihop’ is ‘true’,‘source-addr’ must be configured.
vrf-name	O	vrf:vrf-ref	Name of VRF instance.
control-packet-input	O	integer	Number of control packets received
control-packet-output	O	integer	Number of control packets transmitted
echo-packet-input	O	integer	Number of echo packets received
echo-packet-output	O	integer	Number of echo packets transmitted
session-up	O	integer	Number of sessions that have been established
session-down	O	integer	Number of sessions that have been terminated
zebra-notifications	O	integer	Number of zebra notifications received

Show Bfd Distributed

Tree Diagram

/workspaces/as-mgmt-doc/doc/resource/yang/asternos-bfd.yang:18: warning: imported module "asternos-common" not used
/workspaces/as-mgmt-doc/doc/resource/yang/asternos-bfd.yang:419: warning: default value for a key leaf is ignored
module: asternos-bfd

  rpcs:
    +---x show-bfd-distributed
       +--ro output
          +--ro data?   <anydata>

Table of Properties

Name	Required	Type/Range	Description
show-bfd-distributed	O
data	O

Show Bfd Static Route

Tree Diagram

/workspaces/as-mgmt-doc/doc/resource/yang/asternos-bfd.yang:18: warning: imported module "asternos-common" not used
/workspaces/as-mgmt-doc/doc/resource/yang/asternos-bfd.yang:419: warning: default value for a key leaf is ignored
module: asternos-bfd

  rpcs:
    +---x show-bfd-static-route
       +--ro output
          +--ro data?   <anydata>

Table of Properties

Name	Required	Type/Range	Description
show-bfd-static-route	O
data	O