Interface Bandwidth Utilization Alert
此内容尚不支持你的语言。
log-threshold {tx|rx|both|default}
Section titled “log-threshold {tx|rx|both|default}”[Command] **log-threshold {tx|rx|both|default}**number
[Purpose] Configure interface bandwidth utilization alarm direction
[Parameter]
| Parameter | Description |
|---|---|
| tx | Loopback port ID |
| rx | Alarms triggered only by transmission direction |
| both | Alarms triggered only by both directions |
| number | Alarm threshold, configurable from 50 to 100 |
| default | The default configuration sets the alert trigger threshold to 80 and the recovery threshold to 75 |
[View] Interface view
[Use Cases]
sonic(config-if-2)# log-threshold both 90