Ucentral-client
此内容尚不支持你的语言。
Ucentral-client
Section titled “Ucentral-client”show ucentral-client server configuration
Section titled “show ucentral-client server configuration”[Command]
show ucentral-client server configuration
[Purpose]
The ucentral-client feature is used to connect the device to a unified controller platform, facilitating subsequent configuration viewing, configuration deployment, and unified management and topology planning. This show command is used to view the ucentral-client configuration. The service must be enabled and the corresponding controller IP address must be configured in advance.
[View]
System view
[Use Cases]
sonic# show ucentral-client server configurationServerIP Vrf------------ -------52.76.134.89 defaultshow ucentral-client server status
Section titled “show ucentral-client server status”[Command]
show ucentral-client server status
[Purpose]
To view the status of ucentral-client, the service must be enabled and the corresponding controller IP address must be configured in advance.
[View]
System view
[Use Cases]
sonic# show ucentral-client server status+--------------+-------------+| ServerIP | status |+==============+=============+| 52.76.134.89 | connected |+--------------+-------------+ucentral-client enable
Section titled “ucentral-client enable”[Command]
ucentral-client enable
[Purpose]
Enable Ucentral client service
[View]
System configuration view
[Use Cases]
sonic(config)# ucentral-client enableucentral-client server string
Section titled “ucentral-client server string”[Command]
ucentral-client server string
[Purpose]
Configure Ucentral client controller IP
[Parameter]
| Parameter | Description |
|---|---|
| String | Configure the IP or URL of the controller |
[View]
System configuration view
[Use Cases]
soni(config)# ucentral-client server 52.76.134.89