AsterNOS-MPLS-LDP-Netconf

AsterNOS-MPLS-LDP

This chapter provides examples on how to use Netconf to manage MPLS LDP configurations on AsterNOS devices.

Create MPLS LDP Configuration

Request example to create the entire MPLS LDP configuration via edit-config.

<config>
  <top>
    <mpls-ldp operation="create">
      <global>
        <router-id>1.1.1.1</router-id>
        <ordered-control>false</ordered-control>
        <wait-for-sync>60</wait-for-sync>
        <dual-stack-prefer-ipv4>true</dual-stack-prefer-ipv4>
        <hello-interval>10</hello-interval>
        <hello-holdtime>30</hello-holdtime>
        <targeted-hello-interval>15</targeted-hello-interval>
        <targeted-hello-holdtime>45</targeted-hello-holdtime>
        <neighbors>
          <neighbor>2.2.2.2</neighbor>
          <password>secret</password>
          <ttl-security-disable>false</ttl-security-disable>
          <ttl-security-hops>2</ttl-security-hops>
          <session-interval>10</session-interval>
          <session-holdtime>30</session-holdtime>
        </neighbors>
      </global>
      <address-families>
        <address-family>
          <type>ipv4</type>
          <discovery>
            <hello-interval>8</hello-interval>
            <hello-holdtime>24</hello-holdtime>
            <targeted-hello-interval>12</targeted-hello-interval>
            <targeted-hello-holdtime>36</targeted-hello-holdtime>
            <targeted-hello-accept-filter>peer-filter-1</targeted-hello-accept-filter>
            <transport-address>192.168.1.1</transport-address>
          </discovery>
          <interfaces>
            <name>Ethernet1</name>
            <disable-establish-hello>false</disable-establish-hello>
            <hello-interval>7</hello-interval>
            <hello-holdtime>21</hello-holdtime>
          </interfaces>
          <neighbors>
            <neighbor>3.3.3.3</neighbor>
            <targeted>true</targeted>
          </neighbors>
          <label>
            <local-advertise-peer-filter>adv-peer-filter</local-advertise-peer-filter>
            <local-advertise-prefix-filter>adv-prefix-filter</local-advertise-prefix-filter>
            <local-advertise-explicit-null-enable>true</local-advertise-explicit-null-enable>
            <local-allocate-host-routes-only>true</local-allocate-host-routes-only>
            <remote-accept-peer-filter>rem-peer-filter</remote-accept-peer-filter>
            <remote-accept-prefix-filter>rem-prefix-filter</remote-accept-prefix-filter>
          </label>
          <ttl-security-disable>false</ttl-security-disable>
          <session-interval>15</session-interval>
          <session-holdtime>45</session-holdtime>
        </address-family>
      </address-families>
    </mpls-ldp>
  </top>
</config>

Response example

<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="urn:uuid:00000000-0000-0000-0000-000000000000">
  <ok/>
</rpc-reply>

Merge MPLS LDP Configuration

Request example to merge (upsert) MPLS LDP configuration via edit-config.

<config>
  <top>
    <mpls-ldp operation="merge">
      <global>
        <router-id>1.1.1.1</router-id>
        <ordered-control>false</ordered-control>
        <wait-for-sync>60</wait-for-sync>
        <dual-stack-prefer-ipv4>true</dual-stack-prefer-ipv4>
        <hello-interval>10</hello-interval>
        <hello-holdtime>30</hello-holdtime>
        <targeted-hello-interval>15</targeted-hello-interval>
        <targeted-hello-holdtime>45</targeted-hello-holdtime>
        <neighbors>
          <neighbor>2.2.2.2</neighbor>
          <password>secret</password>
          <ttl-security-disable>false</ttl-security-disable>
          <ttl-security-hops>2</ttl-security-hops>
          <session-interval>10</session-interval>
          <session-holdtime>30</session-holdtime>
        </neighbors>
      </global>
      <address-families>
        <address-family>
          <type>ipv4</type>
          <discovery>
            <hello-interval>8</hello-interval>
            <hello-holdtime>24</hello-holdtime>
            <targeted-hello-interval>12</targeted-hello-interval>
            <targeted-hello-holdtime>36</targeted-hello-holdtime>
            <targeted-hello-accept-filter>peer-filter-1</targeted-hello-accept-filter>
            <transport-address>192.168.1.1</transport-address>
          </discovery>
          <interfaces>
            <name>Ethernet1</name>
            <disable-establish-hello>false</disable-establish-hello>
            <hello-interval>7</hello-interval>
            <hello-holdtime>21</hello-holdtime>
          </interfaces>
          <neighbors>
            <neighbor>3.3.3.3</neighbor>
            <targeted>true</targeted>
          </neighbors>
          <label>
            <local-advertise-peer-filter>adv-peer-filter</local-advertise-peer-filter>
            <local-advertise-prefix-filter>adv-prefix-filter</local-advertise-prefix-filter>
            <local-advertise-explicit-null-enable>true</local-advertise-explicit-null-enable>
            <local-allocate-host-routes-only>true</local-allocate-host-routes-only>
            <remote-accept-peer-filter>rem-peer-filter</remote-accept-peer-filter>
            <remote-accept-prefix-filter>rem-prefix-filter</remote-accept-prefix-filter>
          </label>
          <ttl-security-disable>false</ttl-security-disable>
          <session-interval>15</session-interval>
          <session-holdtime>45</session-holdtime>
        </address-family>
      </address-families>
    </mpls-ldp>
  </top>
</config>

Response example

<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="urn:uuid:00000000-0000-0000-0000-000000000001">
  <ok/>
</rpc-reply>

Delete MPLS LDP Configuration

Request example to delete the entire MPLS LDP configuration via edit-config.

<config>
  <top>
    <mpls-ldp operation="delete"/>
  </top>
</config>

Response example

<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="urn:uuid:00000000-0000-0000-0000-000000000002">
  <ok/>
</rpc-reply>

Create MPLS LDP Global Configuration

Request example to create MPLS LDP global configuration via edit-config.

<config>
  <top>
    <mpls-ldp operation="create">
      <global>
        <router-id>5.5.5.5</router-id>
        <dual-stack-prefer-ipv4>false</dual-stack-prefer-ipv4>
        <hello-interval>20</hello-interval>
        <hello-holdtime>60</hello-holdtime>
        <neighbors>
          <neighbor>6.6.6.6</neighbor>
          <password>newpass</password>
        </neighbors>
      </global>
    </mpls-ldp>
  </top>
</config>

Response example

<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="urn:uuid:00000000-0000-0000-0000-000000000003">
  <ok/>
</rpc-reply>

Modify MPLS LDP Global Configuration

Request example to merge MPLS LDP global configuration via edit-config.

<config>
  <top>
    <mpls-ldp operation="merge">
      <global>
        <router-id>20.20.20.20</router-id>
        <hello-interval>50</hello-interval>
        <ordered-control>true</ordered-control>
      </global>
    </mpls-ldp>
  </top>
</config>

Response example

<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="urn:uuid:00000000-0000-0000-0000-000000000004">
  <ok/>
</rpc-reply>

Delete MPLS LDP Global Configuration

Request example to delete MPLS LDP global configuration via edit-config.

<config>
  <top>
    <mpls-ldp>
      <global operation="delete"/>
    </mpls-ldp>
  </top>
</config>

Response example

<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="urn:uuid:00000000-0000-0000-0000-000000000005">
  <ok/>
</rpc-reply>

Create Global LDP Neighbor

Request example to create a global MPLS LDP neighbor via edit-config.

<config>
  <top>
    <mpls-ldp>
      <global>
        <neighbors operation="create">
          <neighbor>10.10.10.10</neighbor>
          <password>testpass</password>
          <ttl-security-disable>false</ttl-security-disable>
          <ttl-security-hops>3</ttl-security-hops>
          <session-interval>20</session-interval>
          <session-holdtime>60</session-holdtime>
        </neighbors>
      </global>
    </mpls-ldp>
  </top>
</config>

Response example

<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="urn:uuid:00000000-0000-0000-0000-000000000006">
  <ok/>
</rpc-reply>

Modify Global LDP Neighbor

Request example to merge a global MPLS LDP neighbor via edit-config.

<config>
  <top>
    <mpls-ldp>
      <global>
        <neighbors operation="merge">
          <neighbor>10.10.10.10</neighbor>
          <password>newpass</password>
          <session-interval>30</session-interval>
        </neighbors>
      </global>
    </mpls-ldp>
  </top>
</config>

Response example

<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="urn:uuid:00000000-0000-0000-0000-000000000007">
  <ok/>
</rpc-reply>

Delete Global LDP Neighbor

Request example to delete a global MPLS LDP neighbor via edit-config.

<config>
  <top>
    <mpls-ldp>
      <global>
        <neighbors operation="delete">
          <neighbor>10.10.10.10</neighbor>
        </neighbors>
      </global>
    </mpls-ldp>
  </top>
</config>

Response example

<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="urn:uuid:00000000-0000-0000-0000-000000000008">
  <ok/>
</rpc-reply>

Create Address Family

Request example to create an MPLS LDP address family via edit-config.

<config>
  <top>
    <mpls-ldp>
      <address-families operation="create">
        <address-family>
          <type>ipv4</type>
        </address-family>
      </address-families>
    </mpls-ldp>
  </top>
</config>

Response example

<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="urn:uuid:00000000-0000-0000-0000-000000000009">
  <ok/>
</rpc-reply>

Delete Address Family

Request example to delete an MPLS LDP address family via edit-config.

<config>
  <top>
    <mpls-ldp>
      <address-families>
        <address-family operation="delete">
          <type>ipv6</type>
        </address-family>
      </address-families>
    </mpls-ldp>
  </top>
</config>

Response example

<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="urn:uuid:00000000-0000-0000-0000-000000000010">
  <ok/>
</rpc-reply>

Create MPLS LDP Interface

Request example to create an interface-specific LDP configuration via edit-config.

<config>
  <top>
    <mpls-ldp>
      <address-families>
        <address-family>
          <type>ipv4</type>
          <interfaces operation="create">
            <name>Ethernet2</name>
            <hello-interval>6</hello-interval>
            <hello-holdtime>18</hello-holdtime>
          </interfaces>
        </address-family>
      </address-families>
    </mpls-ldp>
  </top>
</config>

Response example

<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="urn:uuid:00000000-0000-0000-0000-000000000011">
  <ok/>
</rpc-reply>

Modify MPLS LDP Interface

Request example to merge interface-specific configuration via edit-config.

<config>
  <top>
    <mpls-ldp>
      <address-families>
        <address-family>
          <type>ipv4</type>
          <interfaces operation="merge">
            <name>Ethernet2</name>
            <hello-interval>10</hello-interval>
            <disable-establish-hello>true</disable-establish-hello>
          </interfaces>
        </address-family>
      </address-families>
    </mpls-ldp>
  </top>
</config>

Response example

<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="urn:uuid:00000000-0000-0000-0000-000000000012">
  <ok/>
</rpc-reply>

Delete MPLS LDP Interface

Request example to delete an interface-specific LDP configuration via edit-config.

<config>
  <top>
    <mpls-ldp>
      <address-families>
        <address-family>
          <type>ipv4</type>
          <interfaces operation="delete">
            <name>Ethernet3</name>
          </interfaces>
        </address-family>
      </address-families>
    </mpls-ldp>
  </top>
</config>

Response example

<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="urn:uuid:00000000-0000-0000-0000-000000000013">
  <ok/>
</rpc-reply>

Modify LDP Label Policy

Request example to merge label policy configuration via edit-config.

<config>
  <top>
    <mpls-ldp>
      <address-families>
        <address-family>
          <type>ipv4</type>
          <label operation="merge">
            <local-allocate-host-routes-only>true</local-allocate-host-routes-only>
            <remote-accept-peer-filter>only-peer1</remote-accept-peer-filter>
          </label>
        </address-family>
      </address-families>
    </mpls-ldp>
  </top>
</config>

Response example

<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="urn:uuid:00000000-0000-0000-0000-000000000014">
  <ok/>
</rpc-reply>

Delete LDP Label Policy

Request example to delete label policy configuration via edit-config.

<config>
  <top>
    <mpls-ldp>
      <address-families>
        <address-family>
          <type>ipv4</type>
          <label operation="delete"/>
        </address-family>
      </address-families>
    </mpls-ldp>
  </top>
</config>

Response example

<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="urn:uuid:00000000-0000-0000-0000-000000000015">
  <ok/>
</rpc-reply>

Create Address Family LDP Neighbor

Request example to create an address family-specific neighbor via edit-config.

<config>
  <top>
    <mpls-ldp>
      <address-families>
        <address-family>
          <type>ipv4</type>
          <neighbors operation="create">
            <neighbor>20.20.20.20</neighbor>
            <targeted>true</targeted>
          </neighbors>
        </address-family>
      </address-families>
    </mpls-ldp>
  </top>
</config>

Response example

<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="urn:uuid:00000000-0000-0000-0000-000000000016">
  <ok/>
</rpc-reply>

Modify Address Family LDP Neighbor

Request example to merge an address family-specific neighbor via edit-config.

<config>
  <top>
    <mpls-ldp>
      <address-families>
        <address-family>
          <type>ipv4</type>
          <neighbors operation="merge">
            <neighbor>20.20.20.20</neighbor>
            <targeted>true</targeted>
          </neighbors>
        </address-family>
      </address-families>
    </mpls-ldp>
  </top>
</config>

Response example

<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="urn:uuid:00000000-0000-0000-0000-000000000017">
  <ok/>
</rpc-reply>

Delete Address Family LDP Neighbor

Request example to delete an address family-specific neighbor via edit-config.

<config>
  <top>
    <mpls-ldp>
      <address-families>
        <address-family>
          <type>ipv4</type>
          <neighbors operation="delete">
            <neighbor>20.20.20.20</neighbor>
          </neighbors>
        </address-family>
      </address-families>
    </mpls-ldp>
  </top>
</config>

Response example

<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="urn:uuid:00000000-0000-0000-0000-000000000018">
  <ok/>
</rpc-reply>