Skip to content
AsterNOS
Ask AI

AsterNOS-MPLS-L2VPN-Netconf

AsterNOS-MPLS-L2VPN

Section titled “AsterNOS-MPLS-L2VPN”

This chapter provides examples on how to use Netconf to manage MPLS L2VPN configurations on AsterNOS devices.

Create static pseudowire

Section titled “Create static pseudowire”

Request example to create a static pseudowire via edit-config.

<config><top>
  <mpls-l2vpn>
    <pseudowires>
      <pseudowire operation="create">
        <name>pw1</name>
        <pw-type>static</pw-type>
        <transmit-label>1000</transmit-label>
        <receive-label>1001</receive-label>
        <peer-address>192.0.2.1</peer-address>
      </pseudowire>
    </pseudowires>
  </mpls-l2vpn>
</top></config>

Response example

<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="1">
  <ok/>
</rpc-reply>

Create LDP pseudowire

Section titled “Create LDP pseudowire”

Request example to create an LDP pseudowire via edit-config.

<config><top>
  <mpls-l2vpn>
    <pseudowires>
      <pseudowire operation="create">
        <name>pw2</name>
        <pw-type>ldp</pw-type>
        <pw-id>2000</pw-id>
        <peer-address>192.0.2.2</peer-address>
        <peer-lsr-id>10.0.0.1</peer-lsr-id>
        <pw-status>true</pw-status>
      </pseudowire>
    </pseudowires>
  </mpls-l2vpn>
</top></config>

Response example

<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="2">
  <ok/>
</rpc-reply>

Get pseudowire

Section titled “Get pseudowire”

Request example to get a pseudowire via get-config with subtree filter.

<filter type="subtree">
  <top>
    <mpls-l2vpn>
      <pseudowires>
        <pseudowire>
          <name>pw1</name>
        </pseudowire>
      </pseudowires>
    </mpls-l2vpn>
  </top>
</filter>

Response example

<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="3">
  <data>
    <top>
      <mpls-l2vpn xmlns="http://asterfusion.com/ns/yang/asternos-mpls-l2vpn">
        <pseudowires>
          <pseudowire>
            <name>pw1</name>
            <pw-type>static</pw-type>
            <transmit-label>1000</transmit-label>
            <receive-label>1001</receive-label>
            <peer-address>192.0.2.1</peer-address>
          </pseudowire>
        </pseudowires>
      </mpls-l2vpn>
    </top>
  </data>
</rpc-reply>

Set pseudowire

Section titled “Set pseudowire”

Request example to modify a pseudowire via edit-config.

<config><top>
  <mpls-l2vpn>
    <pseudowires>
      <pseudowire operation="merge">
        <name>pw1</name>
        <receive-label>1010</receive-label>
      </pseudowire>
    </pseudowires>
  </mpls-l2vpn>
</top></config>

Response example

<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="4">
  <ok/>
</rpc-reply>

Delete pseudowire

Section titled “Delete pseudowire”

Request example to delete a pseudowire via edit-config.

<config><top>
  <mpls-l2vpn>
    <pseudowires>
      <pseudowire operation="delete">
        <name>pw2</name>
      </pseudowire>
    </pseudowires>
  </mpls-l2vpn>
</top></config>

Response example

<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="6">
  <ok/>
</rpc-reply>

Create VPLS L2VPN instance

Section titled “Create VPLS L2VPN instance”

Request example to create a VPLS L2VPN instance via edit-config.

<config><top>
  <mpls-l2vpn>
    <l2vpn-instances>
      <l2vpn-instance operation="create">
        <name>vpls1</name>
        <l2vpn-type>vpls</l2vpn-type>
        <pseudowire>pw1</pseudowire>
        <ac-interface>Vlan100</ac-interface>
      </l2vpn-instance>
    </l2vpn-instances>
  </mpls-l2vpn>
</top></config>

Response example

<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="3">
  <ok/>
</rpc-reply>

Create VPWS L2VPN instance

Section titled “Create VPWS L2VPN instance”

Request example to create a VPWS L2VPN instance via edit-config.

<config><top>
  <mpls-l2vpn>
    <l2vpn-instances>
      <l2vpn-instance operation="create">
        <name>vpws1</name>
        <l2vpn-type>vpws</l2vpn-type>
        <pseudowire>pw2</pseudowire>
        <ac-interface>Ethernet1</ac-interface>
      </l2vpn-instance>
    </l2vpn-instances>
  </mpls-l2vpn>
</top></config>

Response example

<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="4">
  <ok/>
</rpc-reply>

Get L2VPN instance

Section titled “Get L2VPN instance”

Request example to get an existing L2VPN instance via get-config with subtree filter.

<filter type="subtree">
  <top>
    <mpls-l2vpn>
      <l2vpn-instances>
        <l2vpn-instance>
          <name>vpls1</name>
          <l2vpn-type>vpls</l2vpn-type>
        </l2vpn-instance>
      </l2vpn-instances>
    </mpls-l2vpn>
  </top>
</filter>

Response example

<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="5">
  <data>
    <top>
      <mpls-l2vpn xmlns="http://asterfusion.com/ns/yang/asternos-mpls-l2vpn">
        <l2vpn-instances>
          <l2vpn-instance>
            <name>vpls1</name>
            <l2vpn-type>vpls</l2vpn-type>
            <pseudowire>pw1</pseudowire>
            <ac-interface>Vlan100</ac-interface>
          </l2vpn-instance>
        </l2vpn-instances>
      </mpls-l2vpn>
    </top>
  </data>
</rpc-reply>

Delete L2VPN instance

Section titled “Delete L2VPN instance”

Request example to delete an L2VPN instance via edit-config.

<config><top>
  <mpls-l2vpn>
    <l2vpn-instances>
      <l2vpn-instance operation="delete">
        <name>vpls1</name>
        <l2vpn-type>vpls</l2vpn-type>
      </l2vpn-instance>
    </l2vpn-instances>
  </mpls-l2vpn>
</top></config>

Response example

<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="6">
  <ok/>
</rpc-reply>

Create local CCC instance

Section titled “Create local CCC instance”

Request example to create a local CCC instance via edit-config.

<config><top>
  <mpls-l2vpn>
    <ccc-instances>
      <ccc-instance operation="create">
        <name>ccc1</name>
        <ccc-type>local</ccc-type>
        <ac-interface>Ethernet1</ac-interface>
        <ac-interface>Ethernet2</ac-interface>
      </ccc-instance>
    </ccc-instances>
  </mpls-l2vpn>
</top></config>

Response example

<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="7">
  <ok/>
</rpc-reply>

Create remote CCC instance

Section titled “Create remote CCC instance”

Request example to create a remote CCC instance via edit-config.

<config><top>
  <mpls-l2vpn>
    <ccc-instances>
      <ccc-instance operation="create">
        <name>ccc2</name>
        <ccc-type>remote</ccc-type>
        <ac-interface>Ethernet3</ac-interface>
        <transmit-label>2000</transmit-label>
        <receive-label>2001</receive-label>
        <nexthop>192.0.2.3</nexthop>
      </ccc-instance>
    </ccc-instances>
  </mpls-l2vpn>
</top></config>

Response example

<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="8">
  <ok/>
</rpc-reply>

Get CCC instance

Section titled “Get CCC instance”

Request example to get a CCC instance via get-config with subtree filter.

<filter type="subtree">
  <top>
    <mpls-l2vpn>
      <ccc-instances>
        <ccc-instance>
          <name>ccc1</name>
        </ccc-instance>
      </ccc-instances>
    </mpls-l2vpn>
  </top>
</filter>

Response example

<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="9">
  <data>
    <top>
      <mpls-l2vpn xmlns="http://asterfusion.com/ns/yang/asternos-mpls-l2vpn">
        <ccc-instances>
          <ccc-instance>
            <name>ccc1</name>
            <ccc-type>local</ccc-type>
            <ac-interface>Ethernet1</ac-interface>
            <ac-interface>Ethernet2</ac-interface>
          </ccc-instance>
        </ccc-instances>
      </mpls-l2vpn>
    </top>
  </data>
</rpc-reply>

Set CCC instance

Section titled “Set CCC instance”

Request example to modify a remote CCC instance via edit-config.

<config><top>
  <mpls-l2vpn>
    <ccc-instances>
      <ccc-instance operation="merge">
        <name>ccc2</name>
        <ccc-type>remote</ccc-type>
        <transmit-label>3000</transmit-label>
        <receive-label>3001</receive-label>
        <nexthop>192.0.2.4</nexthop>
      </ccc-instance>
    </ccc-instances>
  </mpls-l2vpn>
</top></config>

Response example

<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="10">
  <ok/>
</rpc-reply>

Delete CCC instance

Section titled “Delete CCC instance”

Request example to delete a CCC instance via edit-config.

<config><top>
  <mpls-l2vpn>
    <ccc-instances>
      <ccc-instance operation="delete">
        <name>ccc2</name>
      </ccc-instance>
    </ccc-instances>
  </mpls-l2vpn>
</top></config>

Response example

<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="10">
  <ok/>
</rpc-reply>