MCLAG-Netconf

MCLAG

Resources Summary

YANG Path	get/get-config	edit-config	rpc
/mclag-domains/{domainid}	Y	merge, replace, create, delete	—
/mclag-domains/{domainid}/members/{name}	Y	merge, replace, create, delete	—
/mclag-domains/{domainid}/unique-ip	Y	replace, create, delete	—
/mclag-global	Y	merge	—
/show-mclag-consistency-check-result	—	—	Y
/show-mclag-member	—	—	Y
/show-mclag-state	—	—	Y

Examples

Enable MC-LAG

<config><top>
  <mclag-global>
    <enabled>true</enabled>
  </mclag-global>
</top></config>

Create MC-LAG Domain

<config><top>
  <mclag-domains>
    <mclag-domain operation="create">
      <domainid>1</domainid>
      <peer-ip>10.1.1.2</peer-ip>
      <source-ip>10.1.1.1</source-ip>
      <peer-link>Ethernet1</peer-link>
      <keepalive-interval>1</keepalive-interval>
      <session-timeout>30</session-timeout>
      <consistency-check>graceful</consistency-check>
      <dad-source-ip>192.168.15.115</dad-source-ip>
      <dad-peer-ip>192.168.15.116</dad-peer-ip>
      <detection-delay>5</detection-delay>
      <member-recover-delay>60</member-recover-delay>
      <orphan-recover-delay>30</orphan-recover-delay>
      <members>
        <member>
          <name>PortChannel0135</name>
          <active-backup-mode>false</active-backup-mode>
        </member>
      </members>
      <vlans>
        <vlan>
          <vlanid>40</vlanid>
          <unique-ip>true</unique-ip>
        </vlan>
      </vlans>
    </mclag-domain>
  </mclag-domains>
</top></config>

Modify MC-LAG Domain

<config><top>
  <mclag-domains>
    <mclag-domain operation="merge">
      <domainid>1</domainid>
      <peer-ip>20.1.1.2</peer-ip>
      <source-ip>20.1.1.1</source-ip>
      <peer-link>Ethernet1</peer-link>
      <backup-channel>10</backup-channel>
      <keepalive-interval>3</keepalive-interval>
      <session-timeout>60</session-timeout>
      <consistency-check>default</consistency-check>
      <detection-delay>15</detection-delay>
      <member-recover-delay>10</member-recover-delay>
      <orphan-recover-delay>60</orphan-recover-delay>
      <members>
        <member>
          <name>PortChannel0136</name>
          <active-backup-mode>false</active-backup-mode>
        </member>
      </members>
    </mclag-domain>
  </mclag-domains>
</top></config>

Get MC-LAG Domain

<filter type="subtree">
  <top>
    <mclag-domains/>
  </top>
</filter>

Create MC-LAG Member for Domain

<config><top>
  <mclag-domains>
    <mclag-domain>
      <domainid>1</domainid>
      <members operation="create">
        <member>
          <name>PortChannel0003</name>
        </member>
      </members>
    </mclag-domain>
  </mclag-domains>
</top></config>

Delete Single MC-LAG Member for Domain

<config><top>
  <mclag-domains>
    <mclag-domain>
      <domainid>1</domainid>
      <members>
        <member operation="delete">
          <name>PortChannel0003</name>
        </member>
      </members>
    </mclag-domain>
  </mclag-domains>
</top></config>

Delete All MC-LAG Member for Domain

<config><top>
  <mclag-domains>
    <mclag-domain>
      <domainid>1</domainid>
      <members operation="delete">
      </members>
    </mclag-domain>
  </mclag-domains>
</top></config>

Modify MC-LAG Member Attribute

<config><top>
  <mclag-domains>
    <mclag-domain>
      <domainid>1</domainid>
      <members operation="merge">
        <member>
          <name>PortChannel0135</name>
          <active-backup-mode>true</active-backup-mode>
        </member>
      </members>
    </mclag-domain>
  </mclag-domains>
</top></config>

Create MC-LAG Vlan for Domain

<config><top>
  <mclag-domains>
    <mclag-domain>
      <domainid>1</domainid>
      <vlans operation="create">
        <vlan>
          <vlanid>40</vlanid>
        </vlan>
      </vlans>
    </mclag-domain>
  </mclag-domains>
</top></config>

Delete MC-LAG Vlan For Domain

<config><top>
  <mclag-domains>
    <mclag-domain>
      <domainid>1</domainid>
      <vlans operation="delete">
      </vlans>
    </mclag-domain>
  </mclag-domains>
</top></config>

Show MC-LAG Consistency Check Result

<show-mclag-consistency-check-result/>

Show MC-LAG Member

<show-mclag-member/>

Show MC-LAG State

<show-mclag-state/>

Properties Descriptions

Mclag Domains

Tree Diagram

module: asternos-mclag
  +--rw mclag-domains
     +--rw mclag-domain* [domainid]
        +--rw domainid                uint16
        +--rw peer-ip?                inet:ip-address
        +--rw source-ip?              inet:ip-address
        +--rw peer-link?              union
        +--rw keepalive-interval?     uint8
        +--rw session-timeout?        uint16
        +--rw vrf?                    vrf:vrf-ref
        +--rw consistency-check?      enumeration
        +--rw backup-channel?         cmn:vlan-id
        +--rw dad-source-ip?          inet:ip-address
        +--rw dad-peer-ip?            inet:ip-address
        +--rw detection-delay?        uint16
        +--rw member-recover-delay?   uint16
        +--rw orphan-recover-delay?   uint16
        +--rw dad-vrf?                vrf:vrf-ref
        +--rw commit?                 boolean
        +--rw members
        |  +--rw member* [name]
        |     +--rw name                  cmn:port-channel-name
        |     +--rw active-backup-mode?   boolean
        +--rw unique-ip
           +--rw vlanid?   cmn:vlan-id

Table of Properties

Name	Required	Type/Range	Description
mclag-domains	M		Path-only node, has no configurable value.
mclag-domain	M		Path-only node, has no configurable value. List of MCLAGs domain
domainid	O	1..4095	MCLAG domain ID
peer-ip	O	inet:ip-address	Peer IP of the MC-LAG control link
source-ip	O	inet:ip-address	Local IP of the MC-LAG control link
peer-link	O	Ethernet name	The peer-link port name, which is used to connect to the remote MC-LAG
keepalive-interval	O	1..60	MC-LAG keepalive message sending interval in seconds. The Keepalive message interval value should be less than 1/3 of the session timeout time; the session timeout time should be a multiple of the Keepalive message interval Default 1 seconds Default value: 1
session-timeout	O	3..3600	MC-LAG session timeout in seconds. Default 15 seconds Default value: 15
vrf	O	vrf:vrf-ref	VRF name, MC-LAG keepalive session belongs to the VRF that specifies the VRF of the routing port to which the local-address belongs
consistency-check	O	”default" "graceful" "idle”	MC-LAG consistency check action, the default action is the idle mode. default mode: if the consistency check fails, the master and standby devices admin down the failed member ports at the same time. graceful mode: if the consistency check fails, only the Standby role device admin down the failed member ports, and the active device stays up. idle mode, the consistency check only displays the relevant results and does not take any corresponding action. Default value: idle
backup-channel	O	cmn:vlan-id	MC-LAG ICCP alternate pathway vlanid
dad-source-ip	O	inet:ip-address	MC-LAG DAD link local IP
dad-peer-ip	O	inet:ip-address	MC-LAG DAD link peer IP
detection-delay	O	0..512	MC-LAG DAD detection delay in seconds. Default 15 seconds Default value: 15
member-recover-delay	O	0..1000	MC-LAG standby side mlag port error-down state recovery delay time Default 60 seconds Default value: 60
orphan-recover-delay	O	0..1000	MC-LAG standby side non-mlag port error-down state recovery delay time Default 0 seconds Default value: 0
dad-vrf	O	vrf:vrf-ref	VRF name, MC-LAG DAD keepalive session belongs to the VRF that specifies the VRF of the routing port to which the local-address belongs
commit	O	”true" "false”	This is a special leaf to control behavior of server on processing running configuration. If set to false, configurations within its ancestor setting to running datastore WOULD NOT be transferred to operational datastore automatically, until a request containing this leaf with value ‘true’ comes. Normally this leaf can be ignored. Default value: True
members	M		Path-only node, has no configurable value.
member	M		Path-only node, has no configurable value.
name	O	cmn:port-channel-name
active-backup-mode	O	”true" "false”	Whether to enable the active-backup-mode of mclag member, the default mode is active-active mode. Default value: False
unique-ip	M		Path-only node, has no configurable value. Unique ip VLAN ID
vlanid	O	cmn:vlan-id

Member

Tree Diagram

module: asternos-mclag
  +--rw mclag-domains

Unique Ip

Tree Diagram

module: asternos-mclag
  +--rw mclag-domains

Mclag Global

Tree Diagram

module: asternos-mclag
  +--rw mclag-global
     +--rw enabled?   boolean

Table of Properties

Name	Required	Type/Range	Description
mclag-global	M		Path-only node, has no configurable value.
enabled	O	”true" "false”	Indicates if the mclag is enabled

Show Mclag Consistency Check Result

Tree Diagram

module: asternos-mclag

  rpcs:
    +---x show-mclag-consistency-check-result
       +--ro output
          +--ro data?   <anydata>

Table of Properties

Name	Required	Type/Range	Description
show-mclag-consistency-check-result	O
data	O		Show MCLAG consistency check result.

Show Mclag Member

Tree Diagram

module: asternos-mclag

  rpcs:
    +---x show-mclag-member
       +--ro output
          +--ro data?   <anydata>

Table of Properties

Name	Required	Type/Range	Description
show-mclag-member	O
data	O		Show MCLAG member.

Show Mclag State

Tree Diagram

module: asternos-mclag

  rpcs:
    +---x show-mclag-state
       +--ro output
          +--ro data?   <anydata>

Table of Properties

Name	Required	Type/Range	Description
show-mclag-state	O
data	O		Show MCLAG state.