Ospfv2-Netconf

Ospfv2

Resources Summary

YANG Path	get/get-config	edit-config	rpc
/clear-ip-ospf	—	—	Y
/graceful-restart-prepare-ip-ospf	—	—	Y
/ospfv2-interfaces/{name}/{address}	Y	merge, replace, create, delete	—
/ospfv2-interfaces/{name}/{address}/authentication/{key-id}	Y	replace, create, delete	—
/ospfv2/{vrf-name}/{instance}	Y	merge, replace, create, delete	—
/ospfv2/{vrf-name}/{instance}/areas/{area-id}	Y	merge, replace, create, delete	—
/ospfv2/{vrf-name}/{instance}/areas/{area-id}/area-ranges/{ip-prefix}	Y	merge, replace, create, delete	—
/ospfv2/{vrf-name}/{instance}/distribute-route/{protocol}/{direction}	Y	merge, replace, create, delete	—
/ospfv2/{vrf-name}/{instance}/neighbor/{ip}	Y	merge, replace, create, delete	—
/ospfv2/{vrf-name}/{instance}/network/{prefix}	Y	merge, replace, create, delete	—
/show-ip-ospf-database	—	—	Y
/show-ip-ospf-interface	—	—	Y
/show-ip-ospf-neighbor	—	—	Y
/show-ip-ospf-route	—	—	Y

Examples

Get ospfv2 Configuration On Device

Request example via rpc get-config

<filter type="subtree">
  <top>
    <ospfv2>
      <ospfv2-instance>
        <vrf-name>default</vrf-name>
        <instance>0</instance>
      </ospfv2-instance>
    </ospfv2>
  </filter>

Reply example via rpc get-config

<data xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
  <top>
    <ospfv2 xmlns="http://asterfusion.com/ns/yang/asternos-ospfv2">
      <ospfv2-instance>
        <vrf-name>default</vrf-name>
        <instance>0</instance>
        <enable>true</enable>
        <router-id>10.250.0.181</router-id>
        <default-metric>50</default-metric>
        <rfc1583compatibility>true</rfc1583compatibility>
        <areas>
          <area>
            <area-id>0.0.0.10</area-id>
          </area>
          <area>
            <area-id>0.0.0.100</area-id>
            <nssa-no-summary>true</nssa-no-summary>
            <stub>true</stub>
            <stub-no-summary>true</stub-no-summary>
          </area>
          <area>
            <area-id>0.0.0.20</area-id>
          </area>
          <area>
            <area-id>0.0.0.30</area-id>
            <area-ranges>
              <area-range>
                <ip-prefix>1.2.3.0/24</ip-prefix>
                <cost>30</cost>
                <substitute>1.2.4.4/24</substitute>
                <advertise>true</advertise>
              </area-range>
            </area-ranges>
          </area>
          <area>
            <area-id>0.0.0.40</area-id>
            <stub>true</stub>
            <stub-no-summary>true</stub-no-summary>
          </area>
          <area>
            <area-id>0.0.0.70</area-id>
            <nssa-no-summary>true</nssa-no-summary>
          </area>
        </areas>
        <network>
          <prefix>1.2.3.0/24</prefix>
          <area>0.0.0.10</area>
        </network>
        <distribute-route>
          <protocol>default-route</protocol>
          <direction>IMPORT</direction>
          <always>true</always>
        </distribute-route>
        <distribute-route>
          <protocol>connected</protocol>
          <direction>EXPORT</direction>
          <access-list>test_access_list</access-list>
        </distribute-route>
        <distribute-route>
          <protocol>connected</protocol>
          <direction>IMPORT</direction>
          <route-map>test_route_map</route-map>
          <metric>28</metric>
          <metric-type>TYPE_1</metric-type>
        </distribute-route>
        <distribute-route>
          <protocol>static</protocol>
          <direction>EXPORT</direction>
          <access-list>test_access_list</access-list>
        </distribute-route>
      </ospfv2-instance>
    </ospfv2>
  </data>

Create ospfv2 Global

<config><top>
  <ospfv2>
    <ospfv2-instance operation="create">
      <vrf-name>Vrf1</vrf-name>
      <instance>0</instance>
      <router-id>10.10.10.10</router-id>
    </ospfv2-instance>
  </ospfv2>
</top></config>

Merge ospfv2 Global

<config><top>
  <ospfv2>
    <ospfv2-instance operation="merge">
      <vrf-name>Vrf1</vrf-name>
      <instance>0</instance>
      <router-id>100.100.100.100</router-id>
    </ospfv2-instance>
  </ospfv2>
</top></config>

Delete ospfv2 Global

<config><top>
  <ospfv2>
    <ospfv2-instance operation="delete">
      <vrf-name>Vrf1</vrf-name>
      <instance>0</instance>
    </ospfv2-instance>
  </ospfv2>
</top></config>

Create ospfv2 Distribute

<config><top>
  <ospfv2>
    <ospfv2-instance operation="create">
      <vrf-name>Vrf1</vrf-name>
      <instance>0</instance>
      <distribute-route>
        <protocol>bgp</protocol>
        <direction>EXPORT</direction>
        <access-list>test_list</access-list>
      </distribute-route>
    </ospfv2-instance>
  </ospfv2>
</top></config>

Merge ospfv2 Distribute

<config><top>
  <ospfv2>
    <ospfv2-instance>
      <vrf-name>Vrf1</vrf-name>
      <instance>0</instance>
      <distribute-route operation="merge">
        <protocol>bgp</protocol>
        <direction>EXPORT</direction>
        <access-list>change_list</access-list>
      </distribute-route>
    </ospfv2-instance>
  </ospfv2>
</top></config>

Delete ospfv2 Distribute

<config><top>
  <ospfv2>
    <ospfv2-instance>
      <vrf-name>Vrf1</vrf-name>
      <instance>0</instance>
      <distribute-route operation="delete">
        <protocol>bgp</protocol>
        <direction>EXPORT</direction>
      </distribute-route>
    </ospfv2-instance>
  </ospfv2>
</top></config>

Create ospfv2 Network

<config><top>
  <ospfv2>
    <ospfv2-instance>
      <vrf-name>Vrf1</vrf-name>
      <instance>0</instance>
      <network operation="create">
        <prefix>1.2.3.4/24</prefix>
        <area>0.0.0.10</area>
      </network>
    </ospfv2-instance>
  </ospfv2>
</top></config>

Merge ospfv2 Network

<config><top>
  <ospfv2>
    <ospfv2-instance>
      <vrf-name>Vrf1</vrf-name>
      <instance>0</instance>
      <network operation="merge">
        <prefix>1.2.3.4/24</prefix>
        <area>50</area>
      </network>
    </ospfv2-instance>
  </ospfv2>
</top></config>

Delete ospfv2 Network

<config><top>
  <ospfv2>
    <ospfv2-instance>
      <vrf-name>Vrf1</vrf-name>
      <instance>0</instance>
      <network operation="delete">
        <prefix>1.2.3.4/24</prefix>
      </network>
    </ospfv2-instance>
  </ospfv2>
</top></config>

Create ospfv2 Area

<config><top>
  <ospfv2>
    <ospfv2-instance operation="create">
      <vrf-name>Vrf1</vrf-name>
      <instance>0</instance>
      <areas>
        <area>
          <area-id>0.0.0.10</area-id>
          <stub>true</stub>
          <stub-no-summary>true</stub-no-summary>
        </area>
      </areas>
    </ospfv2-instance>
  </ospfv2>
</top></config>

Merge ospfv2 Area

<config><top>
  <ospfv2>
    <ospfv2-instance operation="merge">
      <vrf-name>Vrf1</vrf-name>
      <instance>0</instance>
      <areas>
        <area>
          <area-id>0.0.0.10</area-id>
          <stub-no-summary>true</stub-no-summary>
        </area>
      </areas>
    </ospfv2-instance>
  </ospfv2>
</top></config>

Delete ospfv2 Area

<config><top>
  <ospfv2>
    <ospfv2-instance operation="delete">
      <vrf-name>Vrf1</vrf-name>
      <instance>0</instance>
      <areas>
        <area>
          <area-id>0.0.0.10</area-id>
        </area>
      </areas>
    </ospfv2-instance>
  </ospfv2>
</top></config>

Get ospfv2 Configuration On Interface

Request example via rpc get-config

<filter type="subtree">
  <top>
    <ospfv2-interfaces/>
  </filter>

Reply example via rpc get-config

<data xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
  <top>
    <ospfv2-interfaces xmlns="http://asterfusion.com/ns/yang/asternos-ospfv2">
      <ospfv2-interface>
        <name>Ethernet3</name>
        <address>0.0.0.0</address>
        <vrf-name>default</vrf-name>
        <area-id>0.0.0.10</area-id>
        <authentication-type>TEXT</authentication-type>
        <bfd-enable>true</bfd-enable>
        <metric>50</metric>
        <dead-interval>50</dead-interval>
        <hello-multiplier>10</hello-multiplier>
        <hello-interval>50</hello-interval>
        <mtu-ignore>true</mtu-ignore>
        <network-type>broadcast</network-type>
        <priority>50</priority>
        <retransmission-interval>50</retransmission-interval>
        <transmit-delay>50</transmit-delay>
        <passive>true</passive>
        <bfd-profile>test</bfd-profile>
      </ospfv2-interface>
    </ospfv2-interfaces>
  </top>
</data>

Create ospfv2 Interface

<config><top>
  <ospfv2-interfaces operation="create">
    <ospfv2-interface>
      <name>Ethernet1</name>
      <address>0.0.0.0</address>
      <area-id>0.0.0.10</area-id>
      <authentication-type>TEXT</authentication-type>
      <authentication-key>123</authentication-key>
      <bfd-enable>true</bfd-enable>
      <metric>50</metric>
      <dead-interval>50</dead-interval>
      <hello-multiplier>10</hello-multiplier>
      <hello-interval>50</hello-interval>
      <network-type>broadcast</network-type>
      <priority>50</priority>
      <retransmission-interval>50</retransmission-interval>
      <transmit-delay>50</transmit-delay>
      <passive>true</passive>
      <bfd-profile>test_file</bfd-profile>
      <authentication>
        <key-id>12</key-id>
        <md5-key>123</md5-key>
      </authentication>
      <authentication>
        <key-id>13</key-id>
        <md5-key>1234</md5-key>
      </authentication>
    </ospfv2-interface>
  </ospfv2-interfaces>
</top></config>

Merge ospfv2 Interface

<config><top>
  <ospfv2-interfaces operation="merge">
    <ospfv2-interface>
      <name>Ethernet3</name>
      <address>0.0.0.0</address>
      <area-id>0.0.0.20</area-id>
      <authentication-type>MD5HMAC</authentication-type>
      <authentication-key>12345</authentication-key>
      <bfd-enable>false</bfd-enable>
      <metric>100</metric>
      <dead-interval>100</dead-interval>
      <hello-multiplier>1</hello-multiplier>
      <hello-interval>100</hello-interval>
      <network-type>non-broadcast</network-type>
      <priority>100</priority>
      <retransmission-interval>100</retransmission-interval>
      <transmit-delay>100</transmit-delay>
      <passive>false</passive>
      <bfd-profile>test_file</bfd-profile>
      <authentication>
        <key-id>14</key-id>
        <md5-key>123456</md5-key>
      </authentication>
    </ospfv2-interface>
  </ospfv2-interfaces>
</top></config>

Delete ospfv2 Interface

<config><top>
  <ospfv2-interfaces>
    <ospfv2-interface operation="delete">
      <name>Ethernet3</name>
      <address>0.0.0.0</address>
    </ospfv2-interface>
  </ospfv2-interfaces>
</top></config>

Show Ip Ospf Neighbor

Request example to get ospf neighbor via rpc

<show-ip-ospf-neighbor/>

Reply example

<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="urn:uuid:e190d690-8a6c-454a-a82b-198943a6f056">
  <data>
    <neighbors>
      <neighbor200.1.1.1>
        <nbrState>Full/DR</nbrState>
        <nbrPriority>1</nbrPriority>
        <converged>Full</converged>
        <role>DR</role>
        <upTimeInMsec>164573</upTimeInMsec>
        <routerDeadIntervalTimerDueMsec>30502</routerDeadIntervalTimerDueMsec>
        <upTime>2m44s</upTime>
        <deadTime>30.502s</deadTime>
        <ifaceAddress>10.20.0.2</ifaceAddress>
        <ifaceName>Ethernet3:10.20.0.1</ifaceName>
        <linkStateRetransmissionListCounter>0</linkStateRetransmissionListCounter>
        <linkStateRequestListCounter>0</linkStateRequestListCounter>
        <databaseSummaryListCounter>0</databaseSummaryListCounter>
      </neighbor200.1.1.1>
    </neighbors>
  </data>
</rpc-reply>

Show Ip Ospf Interface

Request example to get ospf Interface via rpc

<show-ip-ospf-interface/>

Reply example

<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="urn:uuid:d500986b-0468-43f9-a209-8e968ea7da42">
  <data>
    <interfaces>
      <Ethernet3>
        <ifUp>True</ifUp>
        <ifIndex>10</ifIndex>
        <mtuBytes>9100</mtuBytes>
        <bandwidthMbit>10</bandwidthMbit>
        <ifFlags>&lt;UP,BROADCAST,RUNNING,MULTICAST&gt;</ifFlags>
        <ospfEnabled>True</ospfEnabled>
        <interfaceIp>
          <ip_10_20_0_1>
            <ipAddress>10.20.0.1</ipAddress>
            <ipAddressPrefixlen>24</ipAddressPrefixlen>
            <ospfIfType>Broadcast</ospfIfType>
            <localIfUsed>10.20.0.255</localIfUsed>
            <area>0.0.0.1</area>
            <routerId>100.1.1.1</routerId>
            <networkType>BROADCAST</networkType>
            <cost>10000</cost>
            <transmitDelaySecs>1</transmitDelaySecs>
            <state>Backup</state>
            <priority>1</priority>
            <drId>200.1.1.1</drId>
            <drAddress>10.20.0.2</drAddress>
            <bdrId>100.1.1.1</bdrId>
            <bdrAddress>10.20.0.1</bdrAddress>
            <mcastMemberOspfAllRouters>True</mcastMemberOspfAllRouters>
            <mcastMemberOspfDesignatedRouters>True</mcastMemberOspfDesignatedRouters>
            <timerMsecs>10000</timerMsecs>
            <timerDeadSecs>40</timerDeadSecs>
            <timerWaitSecs>40</timerWaitSecs>
            <timerRetransmitSecs>5</timerRetransmitSecs>
            <timerHelloInMsecs>4765</timerHelloInMsecs>
            <nbrCount>1</nbrCount>
            <nbrAdjacentCount>1</nbrAdjacentCount>
            <grHelloDelaySecs>10</grHelloDelaySecs>
            <prefixSuppression>False</prefixSuppression>
          </ip_10_20_0_1>
        </interfaceIp>
        <ipAddress>10.20.0.1</ipAddress>
        <ipAddressPrefixlen>24</ipAddressPrefixlen>
        <ospfIfType>Broadcast</ospfIfType>
        <localIfUsed>10.20.0.255</localIfUsed>
        <area>0.0.0.1</area>
        <routerId>100.1.1.1</routerId>
        <networkType>BROADCAST</networkType>
        <cost>10000</cost>
        <transmitDelaySecs>1</transmitDelaySecs>
        <state>Backup</state>
        <priority>1</priority>
        <opaqueCapable>True</opaqueCapable>
        <drId>200.1.1.1</drId>
        <drAddress>10.20.0.2</drAddress>
        <bdrId>100.1.1.1</bdrId>
        <bdrAddress>10.20.0.1</bdrAddress>
        <mcastMemberOspfAllRouters>True</mcastMemberOspfAllRouters>
        <mcastMemberOspfDesignatedRouters>True</mcastMemberOspfDesignatedRouters>
        <timerMsecs>10000</timerMsecs>
        <timerDeadSecs>40</timerDeadSecs>
        <timerWaitSecs>40</timerWaitSecs>
        <timerRetransmitSecs>5</timerRetransmitSecs>
        <timerHelloInMsecs>4765</timerHelloInMsecs>
        <nbrCount>1</nbrCount>
        <nbrAdjacentCount>1</nbrAdjacentCount>
        <grHelloDelaySecs>10</grHelloDelaySecs>
        <prefixSuppression>False</prefixSuppression>
      </Ethernet3>
    </interfaces>
  </data>
</rpc-reply>

Show Ip Ospf Database

Request example to get ospf database via rpc

<show-ip-ospf-database/>

Reply example

<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="urn:uuid:564312ed-e583-4930-a983-6213aa8ecc10">
  <data>
    <routerId>100.1.1.1</routerId>
    <areas>
      <area-id0.0.0.1>
        <routerLinkStates>
          <lsId>100.1.1.1</lsId>
          <advertisedRouter>100.1.1.1</advertisedRouter>
          <lsaAge>164</lsaAge>
          <sequenceNumber>80000007</sequenceNumber>
          <checksum>205</checksum>
          <numOfRouterLinks>1</numOfRouterLinks>
        </routerLinkStates>
        <routerLinkStates>
          <lsId>200.1.1.1</lsId>
          <advertisedRouter>200.1.1.1</advertisedRouter>
          <lsaAge>169</lsaAge>
          <sequenceNumber>8000000b</sequenceNumber>
          <checksum>67d1</checksum>
          <numOfRouterLinks>1</numOfRouterLinks>
        </routerLinkStates>
        <routerLinkStatesCount>2</routerLinkStatesCount>
        <networkLinkStates>
          <lsId>10.20.0.2</lsId>
          <advertisedRouter>200.1.1.1</advertisedRouter>
          <lsaAge>170</lsaAge>
          <sequenceNumber>80000003</sequenceNumber>
          <checksum>73c5</checksum>
        </networkLinkStates>
        <networkLinkStatesCount>1</networkLinkStatesCount>
      </area-id0.0.0.1>
    </areas>
    <asExternalLinkStates>
      <lsId>100.1.1.1</lsId>
      <advertisedRouter>100.1.1.1</advertisedRouter>
      <lsaAge>169</lsaAge>
      <sequenceNumber>80000003</sequenceNumber>
      <checksum>d01d</checksum>
      <metricType>E2</metricType>
      <route>100.1.1.1/32</route>
      <tag>0</tag>
    </asExternalLinkStates>
    <asExternalLinkStates>
      <lsId>192.168.0.0</lsId>
      <advertisedRouter>100.1.1.1</advertisedRouter>
      <lsaAge>169</lsaAge>
      <sequenceNumber>80000003</sequenceNumber>
      <checksum>eec</checksum>
      <metricType>E2</metricType>
      <route>192.168.0.0/20</route>
      <tag>0</tag>
    </asExternalLinkStates>
    <asExternalLinkStates>
      <lsId>192.168.0.0</lsId>
      <advertisedRouter>200.1.1.1</advertisedRouter>
      <lsaAge>719</lsaAge>
      <sequenceNumber>80000002</sequenceNumber>
      <checksum>880f</checksum>
      <metricType>E2</metricType>
      <route>192.168.0.0/20</route>
      <tag>0</tag>
    </asExternalLinkStates>
    <asExternalLinkStates>
      <lsId>200.1.1.1</lsId>
      <advertisedRouter>200.1.1.1</advertisedRouter>
      <lsaAge>679</lsaAge>
      <sequenceNumber>80000002</sequenceNumber>
      <checksum>32f3</checksum>
      <metricType>E2</metricType>
      <route>200.1.1.1/32</route>
      <tag>0</tag>
    </asExternalLinkStates>
    <asExternalLinkStatesCount>4</asExternalLinkStatesCount>
  </data>
</rpc-reply>

Show Ip Ospf route

Request example to get ospf route via rpc

<show-ip-ospf-route/>

Reply example

<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="urn:uuid:5f970466-eb9b-4b46-a854-77971dcf461f">
  <data>
    <routeType>N</routeType>
    <transit>True</transit>
    <cost>10000</cost>
    <area>0.0.0.1</area>
    <nexthops>
      <ip> </ip>
      <directlyAttachedTo>Ethernet3</directlyAttachedTo>
    </nexthops>
    <ip-prefix>10.20.0.0/24</ip-prefix>
  </data>
  <data>
    <routeType>R </routeType>
    <cost>10000</cost>
    <area>0.0.0.1</area>
    <routerType>asbr</routerType>
    <nexthops>
      <ip>10.20.0.2</ip>
      <via>Ethernet3</via>
    </nexthops>
    <ip-prefix>200.1.1.1</ip-prefix>
  </data>
  <data>
    <routeType>N E2</routeType>
    <cost>10000</cost>
    <type2cost>20</type2cost>
    <tag>0</tag>
    <nexthops>
      <ip>10.20.0.2</ip>
      <via>Ethernet3</via>
      <advertisedRouter>200.1.1.1</advertisedRouter>
    </nexthops>
    <ip-prefix>192.168.0.0/20</ip-prefix>
  </data>
  <data>
    <routeType>N E2</routeType>
    <cost>10000</cost>
    <type2cost>20</type2cost>
    <tag>0</tag>
    <nexthops>
      <ip>10.20.0.2</ip>
      <via>Ethernet3</via>
      <advertisedRouter>200.1.1.1</advertisedRouter>
    </nexthops>
    <ip-prefix>200.1.1.1/32</ip-prefix>
  </data>
</rpc-reply>

Properties Descriptions

Ospfv2 Interfaces

Tree Diagram

module: asternos-ospfv2
  +--rw ospfv2-interfaces
     +--rw ospfv2-interface* [name address]
        +--rw name                       cmn:ospf-interface-name
        +--rw address                    inet:ipv4-address-no-zone
        +--rw vrf-name?                  vrf:vrf-ref
        +--rw instance?                  uint16
        +--rw area-id?                   ospf-area-id
        +--rw authentication-type?       authentication-types
        +--rw authentication-key?        cmn:credential-string
        +--rw bfd-enable?                boolean
        +--rw metric?                    uint16
        +--rw dead-interval?             uint16
        +--rw hello-multiplier?          uint8
        +--rw hello-interval?            uint16
        +--rw mtu-ignore?                boolean
        +--rw network-type?              cmn:network-types
        +--rw priority?                  uint8
        +--rw retransmission-interval?   uint16
        +--rw transmit-delay?            uint16
        +--rw passive?                   boolean
        +--rw bfd-profile?               string
        +--rw authentication* [key-id]
        |  +--rw key-id     uint8
        |  +--rw md5-key?   cmn:credential-string
        +--rw mpls-ldp-sync?             boolean
        +--rw mpls-ldp-sync-holddown?    uint16

Table of Properties

Name	Required	Type/Range	Description
ospfv2-interfaces	M		Path-only node, has no configurable value.
ospfv2-interface	M		Path-only node, has no configurable value.
name	O	cmn:ospf-interface-name	Name of interface.
address	O	inet:ipv4-address-no-zone	Restricted to just the IP address.
vrf-name	O	vrf:vrf-ref	Name of VRF.
instance	O	1..65535	Specific OSPF instance.
area-id	O	A.B.C.D integer	Area ID for this network.
authentication-type	O	”MD5HMAC" "TEXT" "NONE”	Authentication type.
authentication-key	O	cmn:credential-string	Simple text OSPF password.
bfd-enable	O	”true" "false”	Enable bfd.
metric	O	1..65535	Cost value set to router-LSA’s metric field
dead-interval	O	1..65535	Interval time after which a neighbor is declared down.
hello-multiplier	O	2..20	Set number of seconds for RouterDeadInterval timer value.
hello-interval	O	1..65535	Set number of seconds for HelloInterval timer value.
mtu-ignore	O	”true" "false”	Enable mtu ignore.
network-type	O	cmn:network-types	Set network type.
priority	O	0..255	Set RouterPriority integer value.
retransmission-interval	O	1..65535	Set number of seconds for RxmtInterval timer value.
transmit-delay	O	1..65535	Set number of seconds for InfTransDelay value.
passive	O	”true" "false”	Do not speak OSPF on the interface.
bfd-profile	O	string	specify a BFD profile.
authentication	M		Path-only node, has no configurable value.
key-id	O	1..255	Key id
md5-key	O	cmn:credential-string	The MD5 password.
mpls-ldp-sync	O	”true" "false”	Enable MPLS LDP-Sync functionality on this circuit. Default value: True
mpls-ldp-sync-holddown	O	0..10000	Time to wait for LDP-Sync to occur before restoring interface metric.

Authentication

Tree Diagram

module: asternos-ospfv2
  +--rw ospfv2-interfaces

Top-level configuration for the OSPFv2 router

Tree Diagram

module: asternos-ospfv2
  +--rw ospfv2
     +--rw ospfv2-instance* [vrf-name instance]
        +--rw vrf-name                  vrf:vrf-ref
        +--rw instance                  uint16
        +--rw enable?                   boolean
        +--rw router-id?                yang:dotted-quad
        +--rw default-metric?           uint32
        +--rw rfc1583compatibility?     boolean
        +--rw mpls-ldp-sync?            boolean
        +--rw mpls-ldp-sync-holddown?   uint16
        +--rw areas
        |  +--rw area* [area-id]
        |     +--rw area-id                 ospf-area-id
        |     +--rw nssa-no-summary?        boolean
        |     +--rw suppress-fa?            boolean
        |     +--rw nssa-translator-role?   nssa-translator-roles
        |     +--rw stub?                   boolean
        |     +--rw stub-no-summary?        boolean
        |     +--rw area-ranges
        |        +--rw area-range* [ip-prefix]
        |           +--rw ip-prefix     range-address
        |           +--rw cost?         uint32
        |           +--rw substitute?   inet:ipv4-prefix
        |           +--rw advertise?    boolean
        +--rw neighbor* [ip]
        |  +--rw ip               inet:ipv4-address-no-zone
        |  +--rw enable?          boolean
        |  +--rw priority?        uint8
        |  +--rw poll-interval?   uint16
        +--rw network* [prefix]
        |  +--rw prefix    range-address
        |  +--rw area?     ospf-area-id
        +--rw distribute-route* [protocol direction]
           +--rw protocol       route-types-v4
           +--rw direction      direction-type
           +--rw route-map?     string
           +--rw access-list?   string
           +--rw always?        boolean
           +--rw metric?        uint32
           +--rw metric-type?   metric-type

Table of Properties

Name	Required	Type/Range	Description
ospfv2	M		Path-only node, has no configurable value. Top-level configuration for the OSPFv2 router.
ospfv2-instance	M		Path-only node, has no configurable value.
vrf-name	O	vrf:vrf-ref	Name of VRF instance.
instance	O	0..65535	Specific OSPF instance.
enable	O	”true" "false”	Enable OSPFv2
router-id	O	yang:dotted-quad	Router-id for the OSPF process.
default-metric	O	0..16777214	Metric of redistributed routes.
rfc1583compatibility	O	”true" "false”	Enable the RFC 1583 compatibility flag.
mpls-ldp-sync	O	”true" "false”	Enable MPLS LDP-Sync functionality on this circuit. Default value: True
mpls-ldp-sync-holddown	O	0..10000	Time to wait for LDP-Sync to occur before restoring interface metric.
areas	M		Path-only node, has no configurable value.
area	M		Path-only node, has no configurable value. List of area objects
area-id	O	A.B.C.D integer
nssa-no-summary	O	”true" "false”	Do not inject inter-area routes into nssa. Default value: False
suppress-fa	O	”true" "false”	Suppress Forwarding Address generation. Default value: False
nssa-translator-role	O	”always" "candidate" "never”	Nssa area translator role.
stub	O	”true" "false”	Config the area as stub area.
stub-no-summary	O	”true" "false”	Do not inject inter-area routes into stub Default value: False
area-ranges	M		Path-only node, has no configurable value.
area-range	M		Path-only node, has no configurable value.
ip-prefix	M	A.B.C.D/M	Designated IP range.
cost	O	0..16777215	Set an explicit metric.
substitute	O	inet:ipv4-prefix	Substitute summarized prefix with another prefix.
advertise	O	”true" "false”	Summarize intra area paths from specified area into one Type-3 summary-LSA.
neighbor	M		Path-only node, has no configurable value. Neighbor list.
ip	O	inet:ipv4-address-no-zone	Neighbor IP address.
enable	O	”true" "false”	Configures OSPF neighbors for NBMA and point-to-multipoint non-broadcast networks.
priority	O	0..255	Neighbor Priority.
poll-interval	O	1..65535	Dead Neighbor Polling interval.
network	M		Path-only node, has no configurable value. Enable routing on list of IP network.
prefix	O	A.B.C.D/M	Prefix on which routing needs to be enabled.
area	O	A.B.C.D integer	Area ID for this network.
distribute-route	M		Path-only node, has no configurable value.
protocol	O	”kernel" "connected" "local" "static" "rip" "ospf" "isis" "bgp" "eigrp" "nhrp" "table" "vnc" "vnc-direct" "babel" "sharp" "openfabric" "default-route”	Protocol to import.
direction	O	”IMPORT" "EXPORT”	Export or import router.
route-map	O	string	Route map reference.
access-list	O	string	Access-list filter name.
always	O	”true" "false”	Always advertise default route.
metric	O	0..16777214	OSPF default metric.
metric-type	O	”TYPE_1" "TYPE_2”	Metric type (1/2).

Area

Tree Diagram

module: asternos-ospfv2
  +--rw ospfv2

Area Range

Tree Diagram

module: asternos-ospfv2
  +--rw ospfv2

Distribute Route

Tree Diagram

module: asternos-ospfv2
  +--rw ospfv2

Neighbor

Tree Diagram

module: asternos-ospfv2
  +--rw ospfv2

Network

Tree Diagram

module: asternos-ospfv2
  +--rw ospfv2

Clear Ip Ospf

Tree Diagram

module: asternos-ospfv2

  rpcs:
    +---x clear-ip-ospf
       +---w input
          +---w vrf?         vrf:vrf-ref
          +---w interface?   cmn:ospf-interface-name
          +---w neighbor?    inet:ipv4-address-no-zone
          +---w process?     empty

Table of Properties

Name	Required	Type/Range	Description
clear-ip-ospf	O
vrf	O	vrf:vrf-ref	Name of VRF instance.
interface	O	cmn:ospf-interface-name	Clear information of specific interface.
neighbor	O	inet:ipv4-address-no-zone	Display information of specific neighbor-id.
process	O	empty	Reset OSPF Process

Graceful Restart Prepare Ip Ospf

Tree Diagram

module: asternos-ospfv2

  rpcs:
    +---x graceful-restart-prepare-ip-ospf

Table of Properties

Name	Required	Type/Range	Description
graceful-restart-prepare-ip-ospf	O

Show Ip Ospf Database

Tree Diagram

module: asternos-ospfv2

  rpcs:
    +---x show-ip-ospf-database
       +---w input
       |  +---w instance?   uint16
       +--ro output
          +--ro data?   <anydata>

Table of Properties

Name	Required	Type/Range	Description
show-ip-ospf-database	O
instance	O	1..65535	Specific OSPF instance.
data	O		Show ip ospf database information.

Show Ip Ospf Interface

Tree Diagram

module: asternos-ospfv2

  rpcs:
    +---x show-ip-ospf-interface
       +---w input
       |  +---w (options)?
       |     +--:(traffic)
       |     |  +---w traffic?     empty
       |     +--:(interface)
       |        +---w interface?   cmn:ospf-interface-name
       +--ro output
          +--ro data?   <anydata>

Table of Properties

Name	Required	Type/Range	Description
show-ip-ospf-interface	O
traffic	O	empty	Display interface counter information.
interface	O	cmn:ospf-interface-name	Display information of specific interface.
data	O		Show ip ospf interface information.

Show Ip Ospf Neighbor

Tree Diagram

module: asternos-ospfv2

  rpcs:
    +---x show-ip-ospf-neighbor
       +---w input
       |  +---w vrf?                 vrf:vrf-ref
       |  +---w (options)?
       |     +--:(all)
       |     |  +---w all?           empty
       |     +--:(detail)
       |     |  +---w detail?        empty
       |     +--:(neighbor-id)
       |     |  +---w neighbor-id?   inet:ipv4-address-no-zone
       |     +--:(interface)
       |        +---w interface?     cmn:ospf-interface-name
       +--ro output
          +--ro data?   <anydata>

Table of Properties

Name	Required	Type/Range	Description
show-ip-ospf-neighbor	O
vrf	O	vrf:vrf-ref	Name of VRF instance.
all	O	empty	Display all neighbors information.
detail	O	empty	Display more details.
neighbor-id	O	inet:ipv4-address-no-zone	Display information of specific neighbor-id.
interface	O	cmn:ospf-interface-name	Display information of specific interface.
data	O		Show ip ospf neighbor information.

Show Ip Ospf Route

Tree Diagram

module: asternos-ospfv2

  rpcs:
    +---x show-ip-ospf-route
       +--ro output
          +--ro data?   <anydata>

Table of Properties

Name	Required	Type/Range	Description
show-ip-ospf-route	O
data	O		Show ip ospf route information.