ECMP

此内容尚不支持你的语言。

Load Balance Hash Key

Table 1 Load Balance Hash Key

Command	Purpose
hash mode {ipv4\|ipv6\|non_ip\|ipv4-rdma\|ipv6-rdma} hash_key	Set load-balance mode and hash key.

hash mode {ipv4|ipv6|non_ip|ipv4-rdma|ipv6-rdma} hash_key

[Command]

hash mode {ipv4|ipv6|non-ip|ipv4-rdma|ipv6-rdma} hash_key

[Purpose]

Set load-balance and hash key.

[Parameters]

Parameter	Description
hash_key	The configurable hash key varys in different modes. Keys vlan_id/ip-protocol/src-ip/dst-ip/l4-src-port/l4-dst-port/in-port are supported for type IPv4.Keys vlan-id/src-ipv6/dst-ipv6/l4-src-port/l4-dst-port/in-port/nextheader/flow-label are supported for type IPv6.Keys src-mac/dst-mac/ethertype/vlan-id/in-port are supported for NON-IP type.Keys vlan_id/ip-protocol/src-ip/dst-ip/l4-src-port/l4-dst-port/in-port/bth-dest-qp supported for ipv4-rdma type.Keys vlan-id/src-ipv6/dst-ipv6/l4-src-port/l4-dst-port/in-port/nextheader/ flow-label/bth-dest-qp supported for ipv6-rdma type.

Parameter

Description

hash_key

The configurable hash key varys in different modes. Keys vlan_id/ip-protocol/src-ip/dst-ip/l4-src-port/l4-dst-port/in-port are supported for type IPv4.Keys vlan-id/src-ipv6/dst-ipv6/l4-src-port/l4-dst-port/in-port/nextheader/flow-label are supported for type IPv6.Keys src-mac/dst-mac/ethertype/vlan-id/in-port are supported for NON-IP type.Keys vlan_id/ip-protocol/src-ip/dst-ip/l4-src-port/l4-dst-port/in-port/bth-dest-qp supported for ipv4-rdma type.Keys vlan-id/src-ipv6/dst-ipv6/l4-src-port/l4-dst-port/in-port/nextheader/ flow-label/bth-dest-qp supported for ipv6-rdma type.

[View]

Global Configuration View

[Notes]

Set this parameter to modify the LAG and ECMP hash key. CX308P-48Y-N-V2, CX532P-N-V2 and CX732Q-N-V2 devices currently do not support configuring flow label fields for ipv6 types, which is enabled by default. Only CX864E-N device currently supports ipv4-rdma and ipv6-rdma type. Run command no hash mode {ipv4|ipv6|non-ip|ipv4-rdma|ipv6-rdma} to delete the configured custom load balancing and restore it to the default configuration.

[Use Cases]

sonic# configure terminal
sonic(config)# hash mode ipv4 src-ip dst-ip
sonic(config)# hash mode ipv6 src-ipv6 nextheader in-port
sonic(config)# hash mode non-ip src-mac dst-mac vlan-id

Hash Configuration

Table 2 Hash Configuration

Command	Purpose
hash seed value	Set hash seed.
hash enhancement	Enable Hash Enhancement
hash outer-fields gre enable	Enable hash based on the outer fields of GRE packets.

hash seed value

[Command]

hash seed value

[Purpose]

Set hash seed.

[Parameters]

Parameter	Description
value	The range is 0~4294967295.

[View]

Global Configuration View

[Notes]

Configure this parameter to modify the LAG and ECMP hash seed. Run command no hash seed to restore to default value 10.

[Use Cases]

sonic# configure terminal
sonic(config)# hash seed 1000

hash enhancement

[Command]

hash enhancement

[Purpose]

Enable Hash Enhancements.

[View]

Global Configuration View

[Notes]

Configure this parameter to automatically modify the hash Seed of LAG and ECMP, eliminating ECMP polarization phenomenon. Run command hash enhancement to disable hash enhancement.

[Use Cases]

sonic# configure terminal
sonic(config)# hash enhancement

hash outer-fields gre enable

[Command]

hash outer-fields gre enable

[Purpose]

Enable hash based on the outer fields of GRE messages.

[View]

Global Configuration View

[Notes]

By default, the switch performs hashing based on the inner field of GRE packets. After this configuration, the switch will hash based on the outer field of GRE packets instead of the inner field. Run command no hash outer-fields gre enable to disable the outer field hash function of GRE messages.

[Use Cases]

sonic# configure terminal
sonic(config)# hash outer-fields gre enable