POE

This chapter provides examples on how to use Netconf to manage POE configurations on AsterNOS devices.

Enable POE For Specified Interface

Request example to Set POE configurations of specified interface via edit-config

<config>
  <top>
    <interfaces>
      <interface>
        <name>Ethernet1</name>
        <poe>
          <enable-mode>enable</enable-mode>
          <delay>10</delay>
          <priority>low</priority>
          <max-power>15w</max-power>
          <legacy-detect>true</legacy-detect>
        </poe>
      </interface>
    </interfaces>
  </top>
</config>

Response example

<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="urn:uuid:239fe0f4-e6fd-41fd-9350-d7d01076f2c3">
  <ok/>
</rpc-reply>

Get POE Configurations Of Specified Interface

Request example to get POE configurations of specified interface via get-config

<filter type="subtree">
  <top xmlns="http://asterfusion.com/ns/yang/asternos-interfaces">
    <interfaces>
      <interface>
        <name>Ethernet1</name>
        <poe/>
      </interface>
    </interfaces>
  </top>
</filter>

Response example

<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="urn:uuid:642cbaa6-84b7-4fab-9ba6-f3e67d73f1cc">
  <data>
    <top>
      <interfaces xmlns="http://asterfusion.com/ns/yang/asternos-interfaces">
        <interface>
          <name>Ethernet1</name>
          <poe xmlns="http://asterfusion.com/ns/yang/asternos-poe">
            <enable-mode>enable</enable-mode>
            <delay>10</delay>
            <priority>low</priority>
            <max-power>15w</max-power>
            <legacy-detect>true</legacy-detect>
          </poe>
        </interface>
      </interfaces>
    </top>
  </data>
</rpc-reply>

Delete POE Of Specified Interface

Request example to delete POE configurations of specified interface via edit-config

<config>
    <top>
        <interfaces>
            <interface>
                <name>Ethernet1</name>
                <poe operation="delete"/>
            </interface>
        </interfaces>
    </top>
</config>

Response example

<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="urn:uuid:639e30c3-b6dd-4a43-bdb5-6af477c00ce7">
  <ok/>
</rpc-reply>

Bind Time-range To POE Interface

Request example to create time-range configurations via edit-config

<config>
    <top>
        <time-ranges>
            <time-range operation="create">
                <name>bbb</name>
                <days-in-week>sunday monday</days-in-week>
                <start>12:00</start>
                <end>13:30</end>
            </time-range>
        </time-ranges>
    </top>
</config>

Response example

<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="urn:uuid:f77af791-9b4b-412b-9b96-e9b2c4e63317">
  <ok/>
</rpc-reply>

Request example to bind time-range to POE interface via edit-config

<config>
    <top>
        <interfaces>
            <interface>
                <name>Ethernet1</name>
                <poe operation="merge">
                    <enable-mode>enable</enable-mode>
                    <delay>100</delay>
                    <priority>high</priority>
                    <max-power>15w</max-power>
                    <legacy-detect>true</legacy-detect>
                    <power-off-time-range>bbb</power-off-time-range>
                </poe>
            </interface>
        </interfaces>
    </top>
</config>

Response example

<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="urn:uuid:a9c0136e-a55f-452b-809c-e29c633f63df">
  <ok/>
</rpc-reply>

Set POE Global Configurations

Caution

NOTE: The sum of max power for all POE interfaces cannot exceed POE max power.

On the 102S_HPW1 series switch, the max poe_max_power is 150 W; On the 204Y_HPW1 series switch, the max poe_max_power is 370 W. On the 204Y_HPW2 series switch, the max poe_max_power is 740 W. On the 206Y_HPW4 series switch, the max poe_max_power is 1440 W. On the 206Y_HPW8 series switch, the max poe_max_power is 2880 W.

Request example to set POE global poe-max-power via edit-config

<config>
    <top>
        <poe>
            <poe_max_power>150</poe_max_power>
        </poe>
    </top>
</config>

Response example

<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="urn:uuid:639e30c3-b6dd-4a43-bdb5-6af477c00ce7">
  <ok/>
</rpc-reply>

Get POE Global Configurations

Request example to get POE global configurations via get-config

<filter type="subtree">
    <top>
        <poe/>
    </top>
</filter>

Response example

<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="urn:uuid:93541c7b-26b8-4b5d-b164-9d247c8177bf">
  <data>
    <top>
      <poe xmlns="http://asterfusion.com/ns/yang/asternos-poe">
        <poe_max_power>150</poe_max_power>
      </poe>
    </top>
  </data>
</rpc-reply>

Delete POE Configurations

Request example to delete POE global configurations via edit-config

<config>
    <top>
        <poe operation="delete"/>
    </top>
</config>

Response example

<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="urn:uuid:cdabecf2-d2b5-4eb7-9cbb-47542a1086d4">
  <ok/>
</rpc-reply>

Reinitialize POE

Request example to reinitialize POE via rpc reinitialize-poe

<reinitialize-poe/>

Response example

<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="urn:uuid:b14004b7-1fa4-4467-8232-83af39c85555">
  <data xmlns="http://asterfusion.com/ns/yang/asternos-poe">
    Restore poe to factory setting
    Reinitalize poe finished
    Recover poe finished
  </data>
</rpc-reply>

Display Interface POE Initialization Information

Request example to display interface POE initialization information via rpc show-interface-poe-diagnose

<show-interface-poe-diagnose/>

Response example

<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="urn:uuid:cb81abe4-1361-4e64-8b2a-9511ee84e83e">
  <data xmlns="http://asterfusion.com/ns/yang/asternos-poe">
    PSE device information:
    field              value
    -----------------  ------------------------------------
    version            0x5a42
    status             OK Expected PoE device Found (Zone1)
    event
    temperature        37 C
    temperature-alarm  110 C
    reset-count        0
    initialized        True
    PSE wrong port map:
    Interface    Current Id    Expect Id
    -----------  ------------  -----------
  </data>
</rpc-reply>

Display Interface POE Status

Request example to display interface POE status via rpc show-interface-poe-status

<show-interface-poe-status/>

Response example

<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="urn:uuid:5ce6021c-da52-43a2-8e55-774796e37a65">
  <data xmlns="http://asterfusion.com/ns/yang/asternos-poe">
      Interface    poe_status    Poe_delay    Current(A)    Voltage(V)    Power(W)    MaxPower(W)    Power/MaxPower    Power/DevicePSU    Legacy_detect
    -----------  ------------  -----------  ------------  ------------  ----------  -------------  ----------------  -----------------  ---------------
      Ethernet1           N/A          N/A           N/A           N/A         N/A            N/A               N/A                N/A              N/A
      Ethernet2           N/A          N/A           N/A           N/A         N/A            N/A               N/A                N/A              N/A
      Ethernet3           N/A          N/A           N/A           N/A         N/A            N/A               N/A                N/A              N/A
      Ethernet4           N/A          N/A           N/A           N/A         N/A            N/A               N/A                N/A              N/A
      Ethernet5           N/A          N/A           N/A           N/A         N/A            N/A               N/A                N/A              N/A
      Ethernet6           N/A          N/A           N/A           N/A         N/A            N/A               N/A                N/A              N/A
      Ethernet7           N/A          N/A           N/A           N/A         N/A            N/A               N/A                N/A              N/A
      Ethernet8           N/A          N/A           N/A           N/A         N/A            N/A               N/A                N/A              N/A
      Ethernet9           N/A          N/A           N/A           N/A         N/A            N/A               N/A                N/A              N/A
    Ethernet10           N/A          N/A           N/A           N/A         N/A            N/A               N/A                N/A              N/A
    Ethernet11           N/A          N/A           N/A           N/A         N/A            N/A               N/A                N/A              N/A
    Ethernet12           N/A          N/A           N/A           N/A         N/A            N/A               N/A                N/A              N/A
    Ethernet13           N/A          N/A           N/A           N/A         N/A            N/A               N/A                N/A              N/A
    Ethernet14           N/A          N/A           N/A           N/A         N/A            N/A               N/A                N/A              N/A
    Ethernet15           N/A          N/A           N/A           N/A         N/A            N/A               N/A                N/A              N/A
    Ethernet16           N/A          N/A           N/A           N/A         N/A            N/A               N/A                N/A              N/A
    -----------  ------------  -----------  ------------  ------------  ----------  -------------  ----------------  -----------------  ---------------
    The sum of the above POEs power is: 0.000 w
    The maximum POEs power of the device is 150W, the ratio of (sum_POEs_power/maxPOEsPower) is :0.000%
  </data>
</rpc-reply>