Syslog

This chapter provides examples on how to use Netconf to manage Syslog configurations on AsterNOS devices.

Modify Syslog Source Interface

Caution

NOTE: The source-interface value must be a valid interface name that can be used as the source for syslog server communication. It can be one of the following types:

• The physical port, named like “Ethernet0”, etc
• The sub-vlan-interfaces, named like “Eth0.1”, etc
• Loopback interfaces, named like “Loopback0”, etc
• VLAN interfaces named with valid VLAN IDs ranging from 0 to 4094, such as “Vlan100”, etc
• The mgmt interface “eth0”

Request example to modify syslog source interface via edit-config.

<config>
    <top>
        <syslog>
            <source-interface>eth0</source-interface>
        </syslog>
    </top>
</config>

Response example

<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="urn:uuid:2ae38810-e0b8-46fd-b32c-29db527e1bb2">
  <ok/>
</rpc-reply>

Create Remote Syslog Server

Caution

NOTE: When configuring a syslog server with VRF, ensure the VRF exists first; otherwise, connection errors may occur since the network update may delays syslog connectivity.

Request example to create remote syslog server via edit-config.

<config>
    <top>
        <syslog>
            <remote-server>
                <ip>192.168.1.1</ip>
                <port>514</port>
                <vrf>default</vrf>
            </remote-server>
        </syslog>
    </top>
</config>

Response example

<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="urn:uuid:33955930-8051-4a86-903b-e3a335fc0d22">
  <ok/>
</rpc-reply>

Modify Remote Syslog Server

Caution

NOTE: When configuring a syslog server with VRF, ensure the VRF exists first; otherwise, connection errors may occur since the network update may delays syslog connectivity.

Request example to modify remote syslog server or source interface via edit-config.

<config>
  <top>
    <syslog>
      <remote-server>
        <ip>192.168.1.1</ip>
      </remote-server>
      <source-interface>eth0</source-interface>
    </syslog>
  </top>
</config>

Response example

<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="urn:uuid:33955930-8051-4a86-903b-e3a335fc0d22">
  <ok/>
</rpc-reply>

Delete Syslog Remote Server

Request example to delete syslog remote server via edit-config.

<config>
  <top>
    <syslog>
      <remote-server operation="delete">
          <ip>192.168.1.1</ip>
      </remote-server>
    </syslog>
  </top>
</config>

Response example

<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="urn:uuid:5e1e8349-d8e4-4d20-a8e5-89fa83712aee">
  <ok/>
</rpc-reply>

Delete Syslog Source Interface

Request example to delete syslog source interface via edit-config.

<config>
  <top>
    <syslog operation="merge">
      <source-interface operation="delete"/>
    </syslog>
  </top>
</config>

Response example

<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="urn:uuid:5e1e8349-d8e4-4d20-a8e5-89fa83712aee">
  <ok/>
</rpc-reply>

Delete All Syslog Configurations

Request example to delete syslog remote server and source interface via edit-config.

<config>
  <top>
    <syslog operation="delete"/>
  </top>
</config>

Response example

<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="urn:uuid:5e1e8349-d8e4-4d20-a8e5-89fa83712aee">
  <ok/>
</rpc-reply>

Get All Syslog Configurations

Request example to retrieve Syslog configurations via get-config with subtree filter.

<filter type="subtree">
  <top>
    <syslog/>
  </top>
</filter>

Response example

<data>
  <top>
    <syslog xmlns="http://asterfusion.com/ns/yang/asternos-syslog">
      <source-interface>eth0</source-interface>
      <remote-server>
        <ip>192.168.1.1</ip>
        <port>514</port>
        <vrf>default</vrf>
      </remote-server>
    </syslog>
  </top>
</data>